Post Buy Requirement
AT
United States
Add Review

Other Products / Services

3M Foil Tapes

3M Foil Tapes resist flames, temperature extremes, high humidity, exposure to UV rays and most chemicals. With literally hundreds of options to choose from, no one carries a more complete line of these indispensable, metal-backed tapes.

Thermally conductive, heat- and light-reflective surfaces promote efficient heating or cooling
Tough, long-wearing backings are tear and puncture resistant
Industrial-strength adhesives bond even in cold or highly humid conditions
View Complete Details

3M Light Cure UV Adhesive

Precision bonding, potting, encapsulation, tacking, and more at the speed of light.
3m-uv2With cure speeds generally less than 5 seconds, you can raise the speed limit for many electronics assembly applications. These specialized acrylate formulations cure on demand when exposed to UV or visible light. And for precision targeting and placement, each adhesive in the line is available in 3, 5, 10, and 30ml EFD- compatible syringes.

Use with manual, semi-automatic, or fully automatic dispensing systems to meet your production requirements for encapsulation, potting, fixturing, wire tacking, sealing, conformal coating, and lens bonding.

Select UV curing versions for thin films and coatings, and bonding heat-sensitive substrates. For curing through thicker sections, visible light formulations cure to depths of 2 to almost 4.

For visible light, the 3M Curing Light VL1 (at right) is a compact and convenient hand tool for spot curing
View Complete Details

Loctite Anti Seize

Loctite anti-seize products provide protection against rust, corrosion, seizing and galling, as well as lubrication. Anti-seizes are typically the products of choice for high temperature applications because of their unique ability to provide protection in extreme temperature conditions. Each product contains a combination of solid lubricating agents resulting in different high temperature limits and lubricities. These are the two major factors in choosing the right anti-seize product for your application.
View Complete Details

Contact Adhesives Fastbond

3M Fastbond Contact Adhesive 10

Brushable, neutral-colored contact adhesive for bonding.3M Fastbond Contact Adhesive 2000NF

Water-dispersed, high solids activated adhesive.
Immediate bonding capabilities and handling strength without forced drying equiptment
Post-formable and heat resistant. Water-dispersed, high-strength contact adhesive.
High coverage.
Long bonding range.
Good heat resistance.
Non-flammable in the wet state.
View Complete Details

3M Pronto Instant Adhesives

Fast bonding with the right combination of strength, cure time and viscosity.
These one-part cyanoacrylate adhesives rapidly reach handling strength at room temperature without a catalyst. On many applications, bonds reach handling strength
in 510 seconds and 80% of full strength in an hour. A single drop per square inch can bond many plastics, rubber, metal and more with tensile strength up to 5000 PSI.

Depending on the specific formulation, you have the following features: resistance to fuels, lubricating oils and other chemicals from -40F to 200F (-40C to 93C); gap filling; extended cure rates for repositionability; high peel and impact strength; conformance to MIL-Spec A-46050C.
View Complete Details

3M Aluminum Foil Tape 431

3M Aluminum Foil Tape 431, 3.1 mil (0.08 mm) aluminum foil backing with acrylic adhesive.

3M Aluminum Foil Tape 431, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent age life and is ideal for harsh, long-term outdoor environments. Meets F.A.R 25.853(a) and meets UL 723 Class L
View Complete Details

Epoxy Adhesives 3M

High-performance specifically for demanding electronics applications.

For assembly of sophisticated electronics where outgassing and corrosion of adhesive bonds are a concern, Scotch-Weld Electronic Grade (EG) epoxies are the advanced alternative to mechanical fasteners and lower-grade adhesives. These 2-part epoxies produce far lower contamination levels of ionic and outgassing impurities than typical epoxy adhesives. Chloride content is lower than standard industrial counterparts.

Targeted dispensing is easy with the 3M EPX Applicator System. Duo-Pak cartridges with long shelf life are stored at room temperature for added convenience in many operations.
View Complete Details

COHRlastic Solid Rubber

The COHRlastic solid silicone rubber line includes specification grade, high-performance grade and electrically conductive grade products.
Solid RubberProducts range in thicknesses from .012 (.031mm) to .500 (12.7mm) in durometer, hardness from 30-70 on the Shore A scale. Materials are provided in both flat sheet stock size 36x36 (914mm x 914mm) and flat yard goods in 36 (914mm) continuous length rolls. Temperature ratings generally range between -100F to + 500F (-73C to + 260C).

Often referred to as red rubber because the earliest offerings were all red in color, COHRlastic solid silicone rubber also comes in clear, gray, black and green, with minimum quantity restrictions. Many COHRlastic solid materials meet the most popular solid rubber specifications, including ZZR-765 and A-A-59588 (ZZR-765 is now a listing within A-A-59588).
View Complete Details

COHRlastic Foam Rubber

COHRlastic F-12 modified cell silicone foam rubber provides excellent flame retardancy (UL 94 V-0) with low toxicity and smoke generation in a conformable expanded cellular material. COHRlastic F-12 is produced in a low 12 lbft3 density for light gasketing and insulation applications.

F-12 ranges in thickness from 116 (1.59mm) to 1 (25.4mm). The standard color is gray, but it is also available in white and black, with minimum quantity requirements.

F-12 also comes in pressure-sensitive adhesive tape form as Strip-N-Stick 512AF, with a film-supported acrylic pressure-sensitive adhesive on one side. COHRlastic F-12 offers excellent compression set resistance and resistance to the environment.
View Complete Details

3M Aluminum Foil Tape 425

3M Aluminum Foil Tape 425, 4.6 mil (0.12mm), Dead-soft aluminum foil tape with a pressure sensitive acrylic adhesive

3M Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent age life and is ideal for harsh, long-term outdoor environments. Meets F.A.R 25.853(a), O447
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (A.S.A.P. Technologies, Inc.)
  • Buford, GA 30518 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/a-s-a-p-technologies-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0006457720{main}( ).../index.php:0
20.01742019904include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.06192742496include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.06933678200header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice