Post Your Requirement Menu

Welcome User

Other Products / Services

Our Complete range of products are SMITH-RAILS system, Inner Ring Races, NUKR SERIES Metric Double Row Heavy Roller, CR SERIES Study type Screwdriver and CR XB SERIES Stud type Hex Head.

SMITH-RAILS system

  • Name SRHP-1XXXX
  • (E) N/A

Precision Manufactured SMITH-RAILS drastically reduce system design time and sourcing cost of guidance systems for material handling equipment supported by heavy-duty SMITH-TRAX® track rollers.

View Complete Details

CR SERIES Study type Screwdriver

  • Name CR-1/2-A
  • Roller O.D .500

Screwdriver Slot Stud Type Needle Roller Bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the Stud Type Series is limited by the moderately sized stud. Manufactured from High-Alloy Bearing quality Steel. Most commonly used general purpose cam follower and available in sealed versions

View Complete Details

CR XB SERIES Stud type Hex Head

  • Name CR-1/2-B
  • (B) Roller width .375

Hex Head Stud Type Needle Roller Bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the Stud Type Series is limited by the moderately sized stud. Manufactured from High-Alloy Bearing quality Steel.

View Complete Details

YR C Crowned Outer Race

  • Name YR-3/4-XC
  • (A) Bore Nominal .2500

Crowned outer races are recommended when the track is not precisely aligned and square with the cam follower. Crowned outer races reduce undesirable thrust loads on the rollers and increases life and reliability of the bearing.

View Complete Details

YR-X-SS: Stainless Steel Sealed

  • Name YR-3/4-X-SS
  • (W) Overall Width .5625

Manufactured from 440 Stainless Steel. Intended for applications in harsh environments that require increased corrosion resistance. Excellent choice for outdoor use or for applications such as food production facilities that require frequent wash-down and cleaning. Food grade grease is available.

View Complete Details

BYR: Yoke Roller with Non-Metallic Bushing

  • Name BYR-3/4-XC
  • (W) Overall width .5625

Standard needle rollers are replaced with a non-metallic engineered plastic bushing, which eliminates or reduces the need for bearing lubrication. These bearings are intended for self-lubricated applications.

View Complete Details

Screw Driver Slot Metric Stud Type Caged

  • Name MCR-13

Metric Stud Type Caged with Screw-Driver Slot (unsealed: MCR series and sealed: MCR-S series) For Eccentric Collar or Straight Cylindrical Outside Roller Diameter, please contact manufacture)

View Complete Details

Hex-Drive Metric Stud Type Caged

  • Name MCR-13-B

Metric Stud Type Caged with Hex-Drive (unsealed: MCR-B series and sealed: MCR-SB series) For Eccentric Collar or Straight Cylindrical Outside Roller Diameter, please contact manufacture)

View Complete Details

Inner Ring Races

  • Name IRR-3/8
  • (A) Bore Diameter I.D. Nominal .3750

Inner ring races are hardened, ground, and are used as bushings or sleeves. They are complete with radial oil holes and annular lubrication groove.

View Complete Details

NUKR SERIES Metric Double Row Heavy Roller

  • Name NUKR-35-B
  • (D) Roller O.D. (mm) 35

Made with a Double Row of Heavy Rollers for extremely high load applications. These heavy duty bearings are assembled with metallic side shields helping to retain grease and keep out containments.

View Complete Details

YR-XC Crowned Outer Race

Crowned outer races are recommended when the track is not precisely aligned and square with the cam follower. Crowned outer races reduce undesirable thrust loads on the rollers and increases life and reliability of the bearing.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Garwood, NJ 07027, United States