Our Products

Boonton's PIM 31 series test systems are precision analyzers for passive intermodulation generated in RF paths, components and assemblies. PIM 31 analyzers allow the detailed examination of components used in radio base stations, in-building-DAS installations and other systems transmitting radio frequencies.
The PIM 31 passive intermodulation analyzer emulates a base station radio by providing two signals, up to 20W each, thus following the IEC62037 standard for PIM testing. The frequencies of these carriers are variable within the band of the analyzer, allowing PIM 31 operators to select the optimal frequencies for their wireless systems.
Depending on the application it can be switched between a functional field diagnostic mode and detailed analysis mode with accessibility to all settings and readings. PIM 31 analyzers can be controlled by external mouse and keyboard or through the built-in touch screen display.
20W PIM analyzer
Two variable signals +20 to +44 dBm each
User selectable TX frequencies within the analyzer's band
Very high PIM sensitivity of -175 dBc @ 2 X 43 dBm carriers
Measures Intermodulation products IM3, IM5, IM7 and IM9
User settable frequency sweeps
Measurement recording numeric or image traces
Touch screen display
Maxhold

The Biddle 720350-2 Digital Thermocouple Millivolt Test Set is a portable, lightweight, rugged, and completely self-contained multi-range instrument that measures and simulates up to seven thermocouples in both F and C as well as millivolts. The test set provides high accuracy, high resolution and digital readout.

Features:

Measuring temperature with thermocouples (J, K, T, E, R, S, C, mV).
Comparison of working and reference thermocouples.
Measuring millivolts from thermocouples or other sources.
Calibrating thermocouple-type recorders, controllers, indicators, and other instruments of the deflection, null-balance, or digital type.
Calibrating millivolt-type recorders, controllers and indicators.
Troubleshooting in thermocouple or millivolt dc control loops.

The Anritsu MT8212A is an all-in-one, rugged, handheld analyzer for the everyday technician to maintain and troubleshoot wireless base station systems. A single, lightweight, handheld, battery-operated package, the Anritsu Cell Master combines the functionality of a cable and antenna analyzer, spectrum analyzer, power meter, T1 and E1 analyzer.

This optimal combination of network test capability eases the job of a network technician by eliminating the need for several independent test instruments, and reducing the number of tools the technician must carry and learn to operate. The Anritsu MT8212A Cell Master is an easy-to-use and rugged solution that has been designed specifically for field-based network technicians and engineers.
Menu driven interface and single keystroke functions reduce training for all measurements
StoreRecall 25 setup configurations and up to 200 traces
Built-in intelligence to ensure calibration is performed correctly
FlexCal allows troubleshooting cable and antenna systems without multiple calibrations and calibration setups
Built-in worldwide signal standards and frequency channels
No external power sensor required for power meter measurements
Multilingual user interface features on-screen menus and messages in 6 different languages

The Kaelus IQA-1921C PIM Test Set is a feature rich, high power PIM test solution that can be use for testing per IEC 62037. The IQA-1921C is a proven analyzer that enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. The design includes an integrated panel PC with intuitive touch screen interface for performing tests and generating site reports.
Rugged, reliable construction suitable for field use
Integrated polycarbonate transit case
Range to Fault (RTF) enabled
Fully configurable frequencies, powers and IM products
Simple to operate touch screen interface
Spectrum monitor, frequency sweep and time trace modes

Kaelus IHA-1900A Companion PIM Analyzer 1900MHz
Small, light weight
Battery operated
Rugged construction
One button push-to-test
LED bar display indicates PIM level
LED bar display indicates PIM level

To keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field.

The Anritsu S331E Site Master Cable and Antenna Analyzer does all this while delivering the ease of use, rich functionality, and best-in-class priceperformance you've come to expect from Anritsu. Designed to handle the most punishing field conditions, the Anritsu Site Master Cable and Antenna Analyzer dramatically enhances your productivity and transforms the traditional fix-after-failure maintenance model to one that identifies and fixes problems before major failures occur.Return Loss, VSWR, Cable Loss, Distance-To-Fault
Phase, 2-port Transmission Measurements
High Accuracy Power Meter, GPS
Field-proven design: Four-hour battery life, rugged, compact, lightweight, daylight viewable display
USB connectivity, built-in touch screen keyboard
Intuitive menu-driven touch screen user interface

The Bird SA-6000EX Site Analyzer, 25 MHz - 6 GHz is the user-friendly test solution for installing, maintaining, and troubleshooting your antenna and cable systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment manufacturers, service providers, contractors, tower erectors, and military field personnel world wide approve of the analyzer's precision VSWR and Return Loss results. Wideband Power Sensors up to 4 GHz optionally available for use with the built in Digital Power Meter.

Frequency Range 25 to 3300 MHz
Frequency Accuracy (RF Source Mode) 75 parts per million @ 25C
Frequency Resolution 100 kHz
SWR:
Range 1.00 to 65.00
Resolution 0.01
Return Loss:
Range 0.00 to 54.00 dB
Resolution 0.01 dB
Distance-To-Fault (DTF):
Range (in meters) 0 to (Resolution x dp)
Resolution (in meters)
(1.5 x 10 8)(V f)
(Rectangular Windowing)
deltaF
Where Vf is the relative propagation velocity of the cable.
dp is the number of data points (128, 256, 512).
deltaF is F2 - F1 (in Hz.)

The iHA Companion series Passive Intermodulation (PIM) analyzer complement Summiteks 20 Watt PIM test solutions. The iHA is a lightweight, low power PIM analyzer that can be carried up the tower for coarse component checks or connected at the bottom of the tower to check for badly out of performance interconnections.
Anritsu has developed the PIM Master to verify if receiver interference at a cell site is due to an intermodulation product of two or more transmit frequencies, also known as passive intermodulation (PIM).

The PIM Master generates two high power tones in the transmit band of a base station and Anritsus family of handheld RF instruments PIM Analyzer measures the 3rd, 5th, or 7th order intermodulation products in the receive band coming back down the same cable. And the GPS option will record the location of the measurement.

PIM Testing versus Line Sweeping
A PIM test cannot, however, measure VSWR. This means the test set will not see an open or short condition, unless the fault displays non-linear behavior. A return loss figure that is failing will not be determined with a PIM test measurement.
Components deteriorate as they age due to a number of issues, including poor mechanical design, poor installation, and moisture ingress (which is the most significant).
On-site faults can mostly be categorized into two main types: linearity related and impedance related.

PIM testing measurements reflect the overall linearity of an antenna feed line and Line Sweep measurements reflect the overall impedance matching of all of the components in an antenna feed line. Both tests need to be performed to ensure the overall quality of an antenna feed line. Passing one type of test (PIM or Line Sweep) does not guarantee the other test will pass.

Features:

Tx Band: 925 to 960 MHz
IMD Band: 880 to 915 MHz
IMD Orders: 3rd, 5th, or 7th orders (user selectable)
Featuring 2 x 40 Watts of RF Power. Finds PIM that cannot be found by 2 x 20 Watt PIM testers
Patented Distance-to-PIM (DTP) The Fastest Way to Pinpoint the Source of PIM

Anritsu S331L Site Master Handheld Cable & Antenna Analyzer
> 8 Hour Battery Life
Instant On from Standby Mode
Highest RF Immunity
Built-in InstaCal Module
Fast, One-connection Calibration
FlexCal Calibration
One Calibration for All Frequencies
Built-in Power Meter
Rugged and Reliable
Impact, Dust, and Splash Resistant
Smallest, Lightest Site Master

Passive Intermodulation (PIM) testing accessory kit with components required to validate test equipment operation and perform PIM testing on systems with 7-16 DIN and Type-N connectors. Hard transit case included for protection and transportation of components.
Transit Case Assembly
Tool Bag
3m test cable, DmDf
3m test cable, Dm-Dm
Adapter, Dm-Dm
Adapter, Dm-Nm
Adapter, Dm-Nf
Connector cleaning kit
Adjustable wrench
Torque wrench, 32mm, 25Nm
PIM Source
Low PIM Load
Related Products

The Anritsu S820C Microwave Site Master and Antenna Analyzer is the most accurate and convenient tool available for field installation, verification, troubleshooting and repair of microwave communication systems. Difficult test specifications become easy to verify. The S820C improves quality and reduces maintenance expenses by providing vector corrected measurements via calibration and a convenient user interface. Microwave Site Master targets microwave site installers, point-to-point operators, point-to-multipoint operators, radio manufacturers, PCSCellular operators, utility companies and privatepublic networks that support microwave links. These microwave Site Master models test both waveguide and coaxial cables more conveniently than laboratory sized scalar analyzers or microwave test sets.
Accurately tests coaxial cablewaveguide transmission line and antennas
Tune mode for waveguide component alignmenttesting
Superior immunity to live site RF interference
Clearly defined user interface for coaxial cable and waveguide media
Pop up menus for cable list, waveguide list and compatible flange list
Quickly select cablewaveguide type and test parameters without setup error
Large, high resolution display allows for easy viewing and trace interpretation under a variety of conditions

Rugged, reliable construction suitable for field use
Integrated polycarbonate transit case
Simple to operate touch screen interface
Fully configurable frequencies, powers and IM product
Spectrum analyzer mode
Internal report generation

Battery-operated, high power Passive Intermodulation (PIM) testing solution for the major wireless standards in use around the world including IEC 62037. The PIM Masters small size and light weight, combined with battery operation, make it the ideal solution for verifying PIM performance at difficult to access sites such as Remote Radio Head (RRH) installations or indoor Distributed Antenna Systems (DAS).
The PIM Master includes Anritsus patented Distance-to-PIM (DTP) technology for accurately determining the location of PIM faults, both inside the feed system as well as beyond the antenna. Distance-to-PIM allows technicians to quickly and efficiently locate PIM sources at a site resulting in quicker site repairs and lower cost.
The MW82119A is a high performance PIM test solution allowing operators to adjust output power from +25 dBm (0.3 Watts) to +46 dBm (40 Watts). PIM interference is highly dependent on the power level being transmitted by the system. By matching the PIM test power level more closely to the actual power level used at the site, operators will gain a clearer understanding of the true interference generated by both the RF infrastructure and the environment where the antenna is placed.
Anritsu MW82119A Features:

Small Size: 350 mm x 314 mm x 152 mm (13.8 in x 12.4 in x 6.0 in)
Lightweight: 9.0 kg to 12.2 kg (20 lb. to 27 lb.) depending on frequency band
Battery Operated: 12V Li-Ion battery
25 dBm (0.3 Watt) to 46 dBm (40 Watt) output power

The Anritsu Site Master S820D covering 25 MHz - 20 GHz, is the most accurate, reliable and convenient microwave transmission line and antenna analyzer available for installation, verification, troubleshooting, and repair of microwave communication systems. The Anritsu S820D is an ideal "anytime, anywhere" solution designed for the rugged challenges faced by field technicians working with wireless and defense communications systems.
Standard measurement capabilities includes VSWR, return loss, cable loss, and distance-to-fault (DTF) analysis using industry-leading frequency domain reflectometer (FDR) technology. Patented RF interference rejection enables accurate measurements in the presence of high RF activity. Both coaxial and waveguide connections are supported. Line Sweep Tools (LST) is a free data analysis software utility that enables assessment of system trends, problems, and performance in addition to professional report generation.
Frequency Coverage: 25 MHz to 20 GHz w optional extension down to 2 MHz
Standard TFT daylight viewable color display
Real-time measurement speed
Real-time DTF calculations
Features Frequency Domain Reflectometry (FDR) Technology - find cable and connector faults often missed by inferior Time Domain Reflectometer (TDR) solutions
Only handheld product that supports waveguide
True 2-port cable loss measurements for long microwave cable applications
Power monitor offers power measurements in the field
GPS receiver provides precise location information to overlay on measurements
Handheld, battery-operated design
Lightweight at only 5 lbs. (including battery)
Superior Immunity to RF interference
Locate long range problems with 517 data points
Multilingual user interface; English, French, Chinese, Japanese, Spanish, German
Saves 21 Measurement Test Set-Ups
Saves up to 200 Measurement Traces
Clearly defined user interface for Coaxial cable and Waveguide media
Pop-up menus for cable list, waveguide list, and compatible flange list
Quickly select cablewaveguide type and test parameters without setup error
Alphanumeric Labeling of Saved Measurements
Automatic Time and Date Stamp of Saved Data
Rechargeable, Field Replaceable Battery
Distance Measurement in Feet and Meters
6 Markers, Limit Lines, and Segmented Limit Lines

The majority of problems in mobile networks occur in the base station's infrastructure, consisting of the antenna system, cables, and connectors. To properly service and install cell sites requires suitable test equipment. The JDSU JD724C CellAdvisor Cable and Antenna Analyzer is an optimal test solution for characterizing cell-site infrastructure because of their handheld design, ease of use, and rich functionality. The JDSU JD724C CellAdvisor Cable and Antenna Analyzer offers the measurement functions necessary to accurately verify a site's transmission line and antenna system from signal reflections (voltage standing wave ratio [VSWR] or return loss) to RF or optical transmission power. In addition, the JDSU JD724C CellAdvisor Cable and Antenna Analyzer accurately measures the distance to fault (DTF) for proper identification of its location.
Intuitive user interface with touch screen and indooroutdoor display modes
Dual display and zoom zones for faster analysis
RF port protection up to 40 dBm (10W)
Controls RF and optical power sensors

The N9912A FieldFox RF Analyzer is an integrated handheld instrument for wireless network installation and maintenance. It combines cable antenna analysis, spectrum analysis, power meter measurements, vector network analysis, and a vector voltmeter into one rugged, compact, lightweight and weather-resistant package. Standard accessories include ACDC adapter, battery, soft carrying case, user manual and FieldFox Data Link software.
Cable and antenna analyzer for return loss, one-port cable loss, distance to fault, line sweeping, and VSWR measurements
Handheld network analyzer (S11, S21, phase, and Smith Chart)
Handheld spectrum analyzer, optional preamplifier
Cable trimming
Integrated QuickCal allows you to calibrate FieldFox without a calibration kit, providing worry-free accuracy and repeatability
Immediate calibration with FieldFoxs CalReady makes the unit calibration ready at the test port immediately following power-up
Broadband calibration with automatic interpolation to eliminate re-calibration of FieldFox when the test frequency or the number of points changes
Mechanical open, short, load calibration support

Load attachment inserts with Metric and American threads
PCD insert patterns to match existing jigs and fixtures
Armature frames in Magnesium or Aluminium
Motorized Shaker Body Rotation System
Enclosed Air Inlet and Outlet Ducts
Air Isolation Mounts
Air Glide Casters
Unibase Slip Tables
Standalone Slip Tables
Slip Tables to any Size and Shape
Additional BT Series journal bearings
Thermal Barriers for use with Climatic Chambers
Slip Plates in Magnesium or Aluminium
Gun Drilled Slip Plates for low temperature applications
Head Expanders and Vertical Support Platforms
Customized Fixtures -Cube, L type and T type
Auxiliary Interlock Unit for additional safety Interlock
Remote Control Panel via RS485 data communication

The BTS Master is an integrated multi functional base station test tool eliminating the need to carry and learn multiple test sets. The Anritsu MT8222A measurement capabilities include spectrum analysis including smart measurements, precision return loss, VSWR, cable loss, distance-to-fault, two port gainloss, one port and two port magnitude and phase, interference analysis, spectrogram, RF and demodulation measurements for WCDMAHSDPA, GSMGPRSEDGE, CDMA, EVDO, TD-SCDMA, Fixed WiMAX and Mobile WiMAX, demodulating WCDMAHSDPA, CDMA, TD-SCDMA, EVDO over the air (OTA), location information, enhanced frequency reference oscillator accuracy, variable bias tee, 2 Mbs - E1, T3 and T1 measurements. The High Accuracy Power Meter (Option 19) provides true RMS measurements.

Options:
MT8222A-005: Power Monitor (requires external detector)**
MT8222A-010: Bias Tee variable voltage
MT8222A-10A: High Voltage Bias Tee
MT8222A-019: High Accuracy Power Meter (PSN50 sensor not included)
MT8222A-025: Interference Analysis
MT8222A-026: 6 GHz Cable and Antenna Analyzer (10 MHz to 6 GHz)
MT8222A-027: Channel Scanner
MT8222A-028: CW Signal Generator (requires CW Signal Generator kit)
MT8222A-031: GPS Receiver (includes GPS antenna, Anritsu part number: 2000-1410)
MT8222A-033: cdmaOne and CDMA2000 1xRTT Over The Air (OTA)****
MT8222A-034: EVDO Over the Air (OTA)****
MT8222A-035: W-CDMAHSDPA (OTA)****
MT8222A-037: Mobile WiMAX Over The Air (OTA) Measurements
MT8222A-038: TD-SCDMA Over The Air (OTA) Measurements
MT8222A-040: GSMGPRSEDGE RF Measurement
MT8222A-041: GSMGPRSEDGE Demodulation
MT8222A-042: CDMA RF Measurements
MT8222A-043: cdmaOne and CDMA2000 1xRTT Demodulator
MT8222A-044: W-CDMAHSDPA RF Measurement
MT8222A-045: W-CDMA Demodulation
MT8222A-046: Fixed WiMAX RF Measurement
MT8222A-047: Fixed WiMAX Demodulation
MT8222A-051: T1FT1 BERT (Bit-Error-Rate-Tester)**
MT8222A-052: E1-2 Mbs Bit-Error-Rate-Tester (BERT)**
MT8222A-053: T3T1FT1 BERT (Bit-Error-Rate-Tester)**
MT8222A-060: TD-SCDMA RF Measurement
MT8222A-061: TD-SCDMA Demodulation
MT8222A-062: EVDO RF Measurements
MT8222A-063: EVDO Demodulator
MT8222A-064: DVB-TH Digital Video Measurement
MT8222A-065: W-CDMAHSDPA Demodulation***
MT8222A-066: Mobile WiMAX RF Measurements
MT8222A-067: Mobile WiMAX Demodulator
MT8222A-090: Gated Sweep
MT8222A-0419: PIM Analyzer (requires PIM Master)
MT8222A-0541: LTE RF Measurements
MT8222A-0542: LTE Modulation Measurements

The Anritsu MT8212E Cell Master Base Station Analyzer is the smallest, lightest, and most economical solution for 2G3G4G, and WiMAX base station transmitter testing and ISDB-T and DVB-TH digital broadcast field testing. It's ideal for installation and commissioning as well as for maintenance and troubleshooting.This optimal combination of base station test capabilities in one handheld device eliminates the need for several independent test instruments, thereby reducing the number of tools the user must carry and learn to operate. Whether it's sweeping cables, making power measurements, finding interference, troubleshooting base station signal quality, or verifying backhaul performance, the Cell Master MT8212E is the ideal all-in-one instrument to help keep your network up and running.
30 Analyzers in one
3GPP, including LTE, 3GPP2 and WiMAX signal analyzers
ISDB-T and DVB-TH signal analyzers
Interference mapping with GPS guidance
Indoor and outdoor coverage mapping
Easy-to-use Touch screen
USB connectivity
Most compact handheld

To keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the new 3G and 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field. The S361E Site Master does all this while delivering the ease of use, rich functionality, and best-in-class priceperformance you've come to expect from Anritsu. Designed to handle the most punishing field conditions, the S361E Site Master Cable and Antenna Analyzer dramatically enhances your productivity and transforms the traditional fix-after-failure maintenance model to one that identifies and fixes problems before major failures occur.
Cable and Antenna Analyzer: 2 MHz 6 GHz
Return Loss, VSWR, Cable Loss, Distance-To-Fault, Smith Chart, 1-Port Phase
Field-proven design: Four-hour battery life, rugged, compact, lightweight, daylight viewable display
USB connectivity, built-in touch screen keyboard
Intuitive menu-driven touch screen user interface
Standard three-year warranty (battery one-year warranty)

The Anritsu S820E Microwave Site Master Cable and Antenna Analyzer family with frequency options covering 1 MHz to 8, 14, 20, 30, and 40 GHz, is the worlds most advanced Site Master ever developed. Utilizing the same advanced sampler technology used in our premium Vector Star VNA models, the S820E delivers benchtop microwave performance in a compact handheld package. No other handheld microwave cable & antenna analyzer available today can match the dynamic range performance of the S820E models. With 110 dB of dynamic range up to 40 GHz, the S820E even surpasses the performance of older generation benchtop VNAs. Modern connectivity options (USB, Ethernet) are standard as well as full remote control capability.
1-Port Measurements: RL, VSWR, Cable Loss, DTF, Phase, Smith Chart
2-Port Measurements: Transmission, Cable Loss
Display: Single or Dual Measurement Touchscreen
Calibration: Coaxial (OSL, TOSL), Waveguide (SSL, SSLT)
Dynamic Range: 110 dB (20 MHz to 40 GHz)
Frequency Resolution: 1 Hz (1 MHz to 40 GHz)
Sweep Speed: 650 sdata point
Calibration Temperature Window: 10 C
Full Temperature Calibration Kits: 10 C to +55 C

The EM Test ESD NX30 electrostatic discharge simulator is an easy-to-use tester. It consists of a power supply unit and the discharge gun, operated from the discharge gun. It generates electrostatic discharges up to 30 kV in both air and contact discharge mode. The discharge tips can easily be changed. The discharge networks can be easily changed as they are plugged into the discharge gun. The actual discharge network in use is recognised by the controls and indicated in the display.

The esd NX30 is either mains supplied or supplied by a DC source. Even battery powered operation is possible. Battery operation becomes relevant for testing e.g. as per DC-11224 or VW TL 824 66, ESD Operating Test, where the ground of the ESD generator is connected to the Field Coupling Plane and the Horizontal Coupling plane but not directly to the Reference Ground Plane. Additionally, a fiber optic link is offered as an option to communicate with the esd NX30 separating the sensitive computer from the test set-up and to avoid ground loops.

The iVA series Cable & Antenna Analyzer is an exciting new product from Kaelus that enables users to accurately measure and locate VSWRreturn loss faults in their RF infrastructure. The wireless connectivity allows unprecedented measurement flexibility and opens up new & important possibilities in sweep testing and multi-port testing.The iVA is a rugged battery operated module that can be remotely controlled with any Bluetooth-enabled tablet, smart phone, laptop computer or any of our iPA series Portable Passive Intermodulation analyzers.

Kaelus iVA 0627A Features:

Reinventing site certification sweep testing, dramatically reducing test time on site
Directly measure insertion loss and isolation when using multiple iVAs. Measure calculated insertion loss with a single iVA and an RF short
Accurately measure swept VSWRreturn loss and Distance-to- Fault in RF path
Simple and robust Bluetooth connection to a tablet PC or connect with USB or Bluetooth to a laptop computer
Connect directly to the device under test; eliminates the need for a phase stable cable in most cases
Uses the Kaelus customer-proven iPA reporting workflow & tagging features to facilitate a faster, simpler and more efficient workflow
With the Kaelus iPA controlling the iVA, your RL data can be combined with your PIM data into a single report. Reports are combined and completed on-site with no post-processing required
Simple to operate, highly intuitive software user interface with the unique ability to generate and complete the test report onsite
Geotag each test point, insert a Google Maps snapshot directly into the report
Handy Spectrum Monitor mode for interference checking

Graphical user interface on touch screen color LCD
Rugged, reliable construction suitable for field use
Integrated polycarbonate transit case
Simple to operate touch screen interface
Fully configurable frequencies, powers and IM product
Threshold alarm
Internal report generation

The Fluke 724 Temperature Calibrator features everything you need to troubleshoot and calibrate temperature. Now you can carry one tool to expertly test all the temperature sensors and transmitters in your plant. The Fluke 724 can measure and source 10 thermocouple types and 7 RTD types, plus volts and ohms. It even handles high-speed pulsed RTD circuits and provides loop power. The dual line measuresource display lets you source temperature and view loop current at the same time. With its simple, "no menus" controls, the Fluke 724 is easy to operate, too. Use the measure and source functions to test and calibrate almost any temperature instrument. Easy to read dual display lets you view input and output simultaneously.

The calibrator measure RTDs, thermocouples, ohms, and volts to test sensors and transmitters. Perform fast linearity tests with 25-Percent and 100-Percent steps. Execute remote tests with auto step and auto ramp. Power transmitters during test using loop power supply with simultaneous mA measurement. With the 724 you can store frequently-used test setups for later use and the compact, streamlined shape makes it easy to carry. The rugged, reliable design stands up to field use and the backlight lets you work in poor light. Large battery capacity for four AA cells. Includes AC70A test clips, one pair of stackable test leads, TL75 test leads, CE and CSA markings, manuals (English, French, German, Spanish, Italian, Portugese, Korean, Chinese and Japanese), users manuals on CD-ROM and NIST- traceable calibration report and data. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Heres an upright unit youre going to love. It does calibrations up to 650 C, weighs only eight pounds, and heats up to 650 C in only 12 minutes12! This dry-well does everything but get legs and walk to the job for you. (And were working on one that does that too.)

This four-inch-wide dry-well is amazing. You can control all functions from the front panel or hook it up to your PC with its built-in RS-232 port. And just like the 9140, it works with all of our software.

It has three removable well inserts available, an optional carrying case, a NIST-traceable calibration, and the best price in the industry.

The iAK is a Passive Intermodulation (PIM) premium test accessory kit that includes all of the necessary components required to validate test equipment operation and perform PIM testing on systems with 7-16 DIN and Type-N connectors.