Post Buy Requirement
AS
United States
Add Review

Our Products

Dust Collectors

Uses

Airflow Systems Southwest offers collectors for a broad range of industrial dust collection needs from processes including sanding, grinding, cutting, mixing, and polishing, as well as welding and soldering. Our full line of cartridge and media dust collectors are at work collecting wood dust, composite dust, plastic dust, paper dust, powders, dry chemicals, soldering fumes, and welding smoke and fume.
Available Models

DCH Series Fully self-contained dust collector units serve as the air flow and filtration source for an entire system. Available with floor standhopper. Airflow ranges from 650 to 1200 CFM.
DC Series Heavy duty cartridge dust collection systems, including single and multi-station units with capacities to 6900 CFM.
F Series Versatile media collector that can be incorporated with ductwork; provides maximum filtration, including dust, smoke, mist, and odors. Airflow ranges from 2000 to 12000 CFM.
HC Collectors Self-contained cartridge filter unit recirculates and filters the air; features (2) E-Z Arm Extractor Arms, with air flow 2000 to 2650 CFM.

Features & Benefits

Our uniquely-designed baffling on our cartridge collectors causes the heaviest material to drop straight to the drum, leaving more filter capacity for collecting the finer dust, enhancing efficiency, and extending filter life.
The Airflow Systems Vibra-Pulse filter cleaning systems cleans cartridge filters 75% more effectively than reverse pulse systems, reducing downtime and maintenance.
The low-profile cabinet of the DCH Dust Collector Series eases filter access to speed filter change-out and maintenance.
Cam-locked external drawers with compression locking system contains particulate in the dust drawer even during in-unit filter cleaning (DCH Dust Collectors, DC-4 and DC-6).
Top inlet design of the dust collector results in less ductwork and lower installation cos
View Complete Details

Downdraft Tables

Uses

Airflow Systems Southwest offers downdraft tables with integral dust collectors for most any type of industrial grinding, sanding, or welding.
Available Models

DTH Series and DT-3000 Downdraft source collection incorporating a work surface, cartridge filters, and Vibra-Pulse push-button filter cleaning. Downdraft velocities range from 112 to 195 FPM.
ALH Series and AL-5 Aluminum-only dust collection system is designed for processing and finishing aluminum, meeting NFPA 651 requirements when properly used and maintained. Downdraft velocities range from 112 to 150 FPM.
Hydrotron DHYD Series Self-contained Wet Collector Downdraft Tables provide safe collection for potentially explosive dust.

Features & Benefits

Direct-drive blower provides reliability, long filter life and low maintenance requirements.
Removable dust collection pan simplifies cleaning and maintenance.
Quick-release doors provide easy filter removal.
Vibra-Pulse filter cleaning system provides easy, push-button self-cleaning between uses.
View Complete Details

Replacement Filters

Airflow Systems Southwest supplies replacement filters for most brands of industrial dust collectors and air cleaners. We have available cartridge filters, poly pads, micro-glasssynthetic bag filters, pleated filters, multi-pockets, aluminum mesh, ASHRAE, DOP & HEPA filters, charcoal filters, after-filters, and mist collector filters. Ask us for replacement filters for your air cleaners, dust collectors, powder coating booths, abrasive blasting booths and exhaust systems.

Airflow Systems Southwest provides field service and replacement filters for most brands of industrial air filtration equipment, including those listed below.*
View Complete Details

Extractor Arms

Uses

Extractor arms capture smoke, fume, dust, mist, powders, and dry chemicals from a wide range of industrial processes, including welding, soldering, brazing, grinding, brazing, grinding, machining, mixing, and packaging operations.
Available Models

E-Z Arm High Flow Extractor 13-inch diameter inlet hood in 7, 10, or 14 lengths for heavy-duty applications.
E-Z Arm II High Flow Extractor 8-inch diameter inlet hood with 5 or 8 lengths.
E-Z Arm 2.5 4.75-inch diameter inlet hood in 4 or 6 lengths for close, precision work.
Telescoping Collection Arm 10-inch diameter in 4- to 5-foot lengths (5- to 7-foot lengths when extended); stainless steel construction.
Corrosion-resistant stainless steel construction (E-Z Arm and E-Z Arm II) for harsh industrial environments.

Features & Benefits

Friction release pawl-and-sprocket design engages positively when positions, yet offers no resistance when moved.
Can be bench- or wall-mounted, or incorporated with a filtration unit.
Easy to install flat base bolts in place; HDPE bearing material works to seal base without need for collars or fittings.
Large, 13-inch diameter inlet hood offers 160 movement; 360 flange handle allows easier hood positioning than single-handle designs.
Rounded duct constructed of 20 gauge aluminum durable, yet lightweight.
Hi-Flow hose spiral-wire reinforced for strength and flexibility; resists weld sparks and grinding embers.
View Complete Details

Air Cleaners

Uses

Free-hanging, ambient air cleaners from Airflow Systems Southwest are self-contained units typically installed in multiples to create a planned air circulation pattern to filter and re-circulate the air throughout the industrial shop. Our industrial air cleaners are at work filtering the air of a broad range of contaminants, including welding smoke and fumes, wet and dry grinding dust, oil mist smoke, sanding dust, and powders. Typical applications include welding operations, woodworking shops, and auto body repair shops.
Available Models

F-Series Versatile media air cleaner provides maximum filtration, including dust, smoke, mist, and odors. Airflow ranges from 1400 to 6000 CFM.
T-140 Media air cleaner with maximum air flow design for light to medium applications, with airflow from 3500 to 4500 CFM.
TC-4 Free-hanging collector with self-cleaning cartridge filters for heavy-duty applications; airflow capacity is 3600-4500 CFM.

Features & Benefits of Media Air Cleaners

Low maintenance filters can be replaced or cleaned when dirty; no tools needed for filter change-out.
Totally enclosed direct-drive motor-blower unit ensures quiet operation and long life.
Four-way airfoil grille provides easy, precise air flow adjustment.
Large main filters provide 98% filtration efficiency.
Non-electrostatic operation for maximum reliability.
View Complete Details

Portable Dust Collectors

Uses

Portable dust collectors from Airflow Systems Southwest are at work collecting dust, smoke, mist or fume generated in many types of industrial processes, such as grinding, welding, food mixing and blending, pharmaceuticals preparation, graphite machining, and woodworking.
Available Models

PCH Series Portable dust collectors feature the E-Z Arm Extractor Arm in either singe or dual cartridge configurations, with airflow from 650 to 1200 CFM.
Mini-Pac Portable air cleaner with the E-Z Arm Extractor with interchangeable filter options collects both dry and wet pollutants. Airflow capacity from 560 to 650CFM.
Mini-Vac Series Self-contained portable unit for high-volume collection in close work areas with heavy contaminant levels. Features a cartridge filter and the E-Z Arm 2.5 Extractor Arm in single, dual, or triple arm extractor configurations.
PAC-91 Portable air cleaner featuring one or two E-Z Arm Extractor Arms. Can be equipped with a variety of filter options to address specific source collection requirements.

Features & Benefits

Patented E-Z Arm High Flow Extractor with external friction joints eases adjustment without restricting air flow.
Low-profile cabinet lowers center of gravity for safe maneuverability and arm-positioning.
Vibra-Pulse filter cleaning system provides easy, push-button self-cleaning of the cartridges, delivering dust to the drawers beneath (PCH Series).
Heavy-duty, 25-foot power cord maximizes collector maneuverability and positioning, even during operation (PCH Series).

Applications
View Complete Details

Wet Collectors

Uses

Airflow Systems Southwest provides wet-type dust collectors with a water filter system to provide safe collection for aluminum, titanium, or other potentially explosive dust. Our wet collectors are utilized for sanding, grinding, buffing, and polishing in applications such as aircraft manufacture and maintenance, metal enclosure fabrication, and medical device manufacturing.
Available Models

Hydrotron HWF Series Ducted wet dust collectors with air flow capacities from 1000 to 20, 000 CFM.
Hydrotron DHYD Series Self-contained wet collector downdraft tables in single or double (back-to-back) configurations with air flow capacities from 3000 to 5000 CFM.
Hydrotron HPB Series and HPB MII Series Self-contained wet collector environmental control booths with air flow from 5500 to 48, 000 CFM.

Features & Benefits

Meets OSHA and NFPA regulations for dust removal within the building.
No expensive filters to replace.
Direct drive non-overloading fan for durable performance.
Re-circulates filtered air for savings on cooling and heating costs.
Automatic fill system with a pressure sensor system is unaffected by debris in the water.
View Complete Details

Fleet Vehicle Exhaust Systems

Exhaust Removal Equipment for Stationary Vehicles

Airflow Systems Southwest offers complete systems for the extraction of harmful exhaust fumes from gasoline and diesel engines. Meeting the needs of maintenance and repair facilities for automobiles, trucks, and heavy equipment, we supply and install track rail systems, track arms, and hose reels.
Selection of Products

Standard and Touchless Rail Systems
Spring-loaded and Motorized Hose Reels
Track Arms for Extended Reach Heavy Equipment Needs
Single- and Twin-Exhaust Extractors
All Accessories Nozzles, Hoses & Balancers
View Complete Details

Mist Collectors

Uses

Airflow Systems Southwest offers a range of mist collector products for effectively removing both oil mist and water-based mist, as well as dry contaminants. Mist collectors remove mist, smoke, machining and grinding dust, and fumes. Our collectors are at work collecting mist, dust and smoke from machining centers, CNC machines, surface grinders, wire drawing machines, stamping presses, and screw machines.
Available Models

Mist-Pak Series features the Mist-Plus contaminant management system technology specifically for the metalworking industry. Air flow from 400 to 3000 CFM.
VOM series of Mist Collectors removes mist, smoke, dust, water soluble coolants, and petroleum-based fluids, with air flow capacities from 600 to 2400 CFM.
F Series of Media Collectors can be incorporated with ductwork, mechanical arms, or used as free-hanging filtration system; provides maximum efficiency in the collection of mist and odors. Air flow from 2000 to 12000 CFM.
Mini-Pac and PAC 91 Portable units with single or double arms and interchangeable filter options; air flows from 560 to 1200 CFM.

Features & Benefits

Mist-Plus contaminant management system provides over 95% efficiency in the collection of oil mist and dry contaminants.
Small footprint minimizes floor space and eases machine- or wall-mounting.
Welded steel cabinet stops contaminant escape from seams; MP14 and MP30 models include sloped drain pan with 1.5 NPT drain.
Ultra-Seal filter mounting system improves filter efficiency and eliminates contaminant by-pass of filters.
Front access filter door provides ready access, reducing filter maintenance and change-out time.
Resists corrosion of harsh industrial environments with 16 & 18 gauge zinc-coated steel cabinets, baked on powder coat finish.
View Complete Details

EMS Vehicle Exhaust Systems

Emergency Vehicle Exhaust Extraction Systems

Airflow Systems Southwest supplies emergency vehicle exhaust removal equipment to ensure optimal air quality in the firehouse while meeting the needs of the emergency response team, including user-friendly operation and automatic quick-release upon exit from the facility. Our MagnaSystem offers proven performance and features an Auto-Start Control System that energizes the exhaust fan before the engine is started and extends its operation for complete removal of hazardous exhaust fumes.
Available Equipment & Supplies

MagnaTrack Systems high frequency high speed applications for up to four emergency vehicles per bay.
MagnaRail Systems high-volume exhaust removal ideal for drive-through applications.
Pneumatic Rail Systems fully automatic high-volume extraction systems for up to four emergency vehicles per bay.
Pneumatic Track System adaptable to varying vehicles in the facility.
MagnaStack and Vertical Stack Systems solutions for vehicles with vertical exhaust stacks.
All Accessories including hoses, nozzles, and transmitter & radio for auto start and timing of fan operation.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Airflow Systems Southwest)
  • Houston, TX 77079 map
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/airflow-systems-southwest/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457984{main}( ).../index.php:0
20.01532023240include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02352745856include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.02903681560header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice