Our Products #4728838

SPRAYTITE 178 is a closed-cell polyurethane system utilizing an EPA approved, zero ozone-depleting, blowing agent. It is designedfor use in commercial and residential construction applications. SPRAYTITE 178 is compatible with most common construction materials, but can only be processed with BASF SPRAY 8000AFE 800A Isocyanate.

ALDOSEAL 1602 is a pressure sensitive seam sealing tape with Dupont Sontara Fabric backing bonded onto 20 mils of Butyl Rubber adhesive. ALDOSEAL 1602 stays flexible, even at low temperatures, to allow for the expansion and contraction of the substrate. ALDOSEAL 1602 has an aggressive grip with superior adhesion to produce an immediate, water tight seal. Containing no harmful VOCs, the product is environmentally safe. ALDOSEAL 1602 will save metal roof sealing

ALDOCOAT 384 is a technologically advanced, high solids, single component, moisture cure polyurethane elastomer coating uniquely formulated for the protection of spray polyurethane foam insulation and traditional roofing substrates, such as single ply membrane and BUR surfaces. Once cured this liquid applied moisture-curing polymer provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, ALDOCOAT 384 provides greater UV protection than similar generic coatings and offers increased resistance to moisture penetration through its lower moisture vapor permeability values. Due to its moisture-cure properties, a longer production window can be achieved during application.

ALDOBOND 767 is a specially formulated emulsion adhesive which provides a means of adhering ALDOFABRIC 272 Roofing Fabric to various roofing substrates, including concrete and smooth BUR, prior to application of acrylic coating.

ALDOSEAL 747 is a single component vapor retarder thermoplastic seam sealer specially formulated to provide a waterproof, weather resistant membrane with excellent permeability and ultraviolet protection. ALDOSEAL 747 offers good elongation and tensile strength to resist lateral movement and allow for expansion and contraction of the substrate.

ALDOCOAT 386 is a technologically advanced, high solids, single component, moisture cure, bright white polyurethane elastomer coating uniquely formulated for the protection of sprayed-in-place polyurethane foam insulation and traditional roofing substrates, such as EPDM single ply membrane and BUR surfaces. Once cured this liquid applied moisture- curing polymer provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, ALDOCOAT 386 provides greater UV protection than similar generic coatings and offers increased resistance to moisture penetration through its lower moisture vapor permeability values. Due to its moisture-cure properties, a longer production window can be achieved during application

ENERTITE US is a low-density open-cell spray-applied polyurethane (SPF) foam system designed for residential insulation applications. ENERTITE US is compatible with most common construction materials, but should only be processed with BASF SPRAY 8000AFE 800A Isocyanate.

FE 348-2.8 is an HFC-blown, Zero Ozone-Depleting (Zero-ODP), spray polyurethane foam (SPF) system designed for roofing applications.

ALDOPRIME 710 is a water based rust inhibiting environmentally friendly roofing primer developed to be used on corroded metal substrates. This product can be applied as a primer coat for a variety of roof coatings. ALDOPRIME 710 has excellent resistance to heat, cold, moisture and weathering. This primer also sets up quickly to allow the base coat of the desired elastomeric to be applied soon after application.