Other Products / Services #4853746

This isnt your moms old personal soft-sided cooler. This Made in USA cooler packs a serious punch. The Bison SoftPak is tough as nails and keeps ice for up to 24 hours in 120 degree heat. Wrapped in a heavy duty 1000 denier vinyl shell, its stronger than any other soft-sided cooler, tear resistant up to 375 pounds and UV protected to ensure it doesnt fade. With nearly an inch of insulation, this beverage cooler keeps your drinks frosty cold. Use the exterior pocket for dry items or the MOLLE webbing to add your favorite accessories and turn it into a dove hunting, deer hunting or fishing cooler thats designed just for you.

Buyer Beware: Authorized Bison Coolers retailers do not sell through Ebay, Overstock, Amazon or any other mass online retailer. These outlets are susceptible to scams and Bison products purchased through these means will be void of any manufacturer warranty.

HS2000 1 Ton Capacity Hydraulic Spreader

Full 2000 lbs. capacity at 10, 000 psi.

Can be dead ended at 4" spread under full load

High strength alloy steel forged upper and lower jaws

Jaws are spring return, and retract automatically when the pressure is released

Essentially a hydraulic pry bar

1 ton capacity enough for a variety of jobs

Only needs 916" clearance to engage the jaws

Lifts or moves machinery, spreads concrete forms and does straightening work

Conforms to ANSI B30.1 standards

.63 cu in of oil required1 ton capacity spreader. Full 2, 000 lbs. capacity at 10, 000 psi with 4" spread. Can be "dead-ended" at 4" spread under full load. Needs only 916" clearance to engage jaws.

Interchangeable piston head inserts provide versatility of application.
12, 20, 30, 60, 60 ton single-acting models feature threaded collar
Withstands full "dead-end" loads.
Corrosion resistant standpipe has "Power Tech" treatement
All cylinders except RH120 are furnished with a 9796 38" NPT female half coupler
Aluminum cylinder body and piston are featured on the RHA306 Cylinder
Model RH203 and RHA306 do not feature the collar thread. See charts in Specifications.

200% PROOF-LOAD TESTED WITH SERIAL NUMBER FOR TRACEABILITY

SWIVELS 360 DEGREES- PIVOTS 18 DEGREES

MATERIAL: AIRCRAFT QUALITY ALLOY (180 KSI TENSILE STRENGTH, MINUMUM)

FINISH: BLACK OXIDE PER MIL SPEC

ALSO AVAILABLE: CADMIUM PLATED, ELECTROLESS NICKEL PLATED, ZING PLATED

SAFETY FACTOR: 5:1

MAGNETIC PARTICLE INSPECTED

CERTIFIED HEAT TREATMENT

RATED AT 100% FROM 0 DEGREES 90 DEGREES

FATIGUE TESTED TO 20, 000 CYCLE AT 1-12X THE RATED LOAD

MEETS OR EXCEEDS THE REQUIREMENTS OF ASME B30.26

THREAD: LONGER THREAD PROJECTION AND FINE THEAD AVAILABLE

Combines air (first stage only) and hydraulic power for maximum speed and accuracy
Four ratcheting brackets fit transmission pan flanges
Hefty nylon safety strap helps anchor transmission
Wide spread casters for smooth maneuverability
Head adjustments made easy with big easy-to-grip crank handles

Utilizing the latest in alloy technology, high-strength coatings, seal design and bearing materials, Enerpac aluminum cylinders can change the way you think about your cylinder applications. Our lightweight cylinders provide the strength of steel with the weight, transportability and easy positioning of aluminum.

Forged aloy steel- Quenched and Temered, with alloy pins.

Working Load Limit permanently shown on every shackle

Hot Dip Galvanized