Post Buy Requirement

Our Products

Kodiak Tensioner

  • Weight 14 pounds
  • Model Number RCNS2-114
  • Thickness 0.025"- 0.031"
  • Width 1 1/4 Inches
BRAND NEW, expected release of June 2017! The Kodiak Battery Steel Tool is the first tool to tension, seal, and cut 1 14 high tensile steel strapping! Golden bears newest tool is expected to be released first quarter of 17. Speed up your line using the single button operation. Simply hit go, and the tool will pull up, seal, and cut all in one. Let the tool do the work, and there isnt even a second button to hit!

Versatility
This revolutionary combo tool is lightweight at 15.5 pounds, which means your not tied to an air hose and balancer. The battery power lets you lose the pneumatic hose to take it around the shop or yard. It is fast and strong, pulling 1, 700 lbs. of tension. There is an optional counter balance arm to suspend from a tool balancer at a stationary work station.

Specifications
Strap Type: Magnus
Strap Width: 1 14 Inches
Strap Thickness: 0.025"- 0.031"
Seal Name: 1.25 Inch Push Seal
Joint Type: Double Notch
Weight: 14 pounds
View Complete Details

Signode Pneumatic Feedwheel Tensioner

  • Model Number PN2-11
  • Weight 8.1 lb. (3.7 kg)
  • Dimensions 19 - 32 x 0.63 – 1.27 mm / .75" - 1.25" Wide x .020" - .044" Thick
The PN2-114 is a pneumatic feedwheel push type tensioner for steel strapping to secure round or irregular shaped packages. In warehouses and shops where the operator is on their feet and on-the-go, this Signode PN2114 tool can be conveniently transported from one place to another. The Signode PN2-114 is generally used with a pneumatic sealer. The PN2-114 is light enough it does not have to be counter balanced making it mobile. Since it is not a combination tool, a pneumatic sealer must to be used to apply the seal. To eliminate the use of two tools to complete the strapping process, we recommend using a combination tool which tensions, seals, and cuts all in one tool. The best combination tool for 34"- 1 14" banding is the Signode PRHR-114 combination steel strapping tool.

While pneumatic tools are efficient and fast in application, one downfall of the entire pneumatic system is the fact that the air lines are constantly dragging on the floor of the strapping area. In order to have free flowing movement for quicker strapping and a safer work environment, battery powered sealers and tensioners can also provide the same strapping result. The battery form of the PN2-114 is the Signode Grip Pack 114 Tensioner, and there is the Grip Pack 114 Sealer that goes with the tensioner.
View Complete Details

Manual Cord Strapping Tensioner

  • Model No. ASC395
The ASC 395 is the strongest manual tensioner available for cord strapping, webbing, or lashing.
> We tested this tool up to 3, 000 pounds of tension.
> It has a tough cutter on the front, and pulls massive tension.
> It is a heavy tool and we expect it will hold up for longer than any other hand tool on the market.
> There is a release for the windlass so you can release tension, and not have to cut the cord strap.
View Complete Details

Orgapack's Battery Operated Tool

  • Weight (including battery): 8.4 pounds (3.8 kg)
  • Model No. OR-T 260
  • length 13.1” (334 mm)
  • width 5.4” (138 mm)
  • height 5.8” (148 mm)
The Orgapack OR-T 260 is now the most user friendly tool for plastic strapping that runs automatically, semi-automatically, manually or in soft corner mode, making it the most versatile tool for poly strapping. The 260 model tool suits poly strapping size 12"-58". Thanks to recent improvements from Orgapack, the new tools have an upgraded user interface. The new display shows the applied tension in real time. The 18 volt Li-Ion Bosch battery is now well protected. The OR-T 260 can complete up to 800 packages per charge. This tool has a fully adjustable tensioning force 585 pounds, and also has an adjustable strap width option. Orgapack's OR-T 260 seals automatically or with the touch of a button using a friction weld seal.

This tool includes 1 batteries (18 volt, 2 Ah) and rapid charger.

Versatility
> The tools that require metal seals to secure the joint are a more expensive investment in the long run due to the price of regularly stocking metal seals. However, that additional cost is eliminated using the Orgapack ORT-260 because it applies a sealless joint using friction weld sealing technology.

>The sealless and metal seals both hold the same joint efficiency, so there is no giving up seal security with this tool.

> Another guarantee with the sealless tool is that the friction-weld seal will never rust or get broken down during transportation or storage. Poly strapping can withstand humid or damp conditions making it a better option over steel strapping and metal seals.

> As opposed to manual tools that require a few steps to tension, seal and cut the strap, this OR-T 260 tool takes only 3 seconds to complete the entire sealing process, with a lot less effort than before.

> To ensure accurate and precise tensioning, the digital display panel distinctly shows the set tensioning level with the option to change it depending on the application.

> Another model, the Orgapack OR-T 450 is the larger version of the 260 and uses 58"-34" poly strapping. If you like the battery sealing technology of this Orgapack tool, but don't need the full combination action, try the OR-T 50 for small or light loads.

> Signode has a replica OR-T 260 tool, the BXT3-19 tool.
View Complete Details

Pneumatic Polyester Strapping Tool

  • Model No. P359
  • Weight around 19 lb.
  • Dimensions 1" or 1.25" x .040 - .053”
The Fromm P359 tool is the newest addition to the Fromm family of pneumatic powered poly strapping combination tools. The sleek design of this tool makes it look like the Fromm battery combination tools for poly strapping, but it pulls much more tension because of the pneumatic function. This heavy duty tool accepts strapping from 34"- 1 14" and as one of the strongest tools in its class, the P-359 pulls 1, 570 pounds of tension. As with other sealless tools, overhead costs are greatly reduced when using sealless tools because the cost of metal seals is eliminated. Also, the price of plastic strapping is generally more cost effective than steel.

The P359 has the ability to run in either semi-automatic or manual mode. The buttons on the tool allow the operator to decide which feature best fits their strapping needs. As stated, the max. tension is 1, 570 pounds, but that can also be adjusted based on each application. Since it applies a friction weld seal, it is important to allow sufficient cooling time for the heat weld seal, and this tool can adjust the sealing and cooling time to ensure the package is securely sealed. Pneumatic tools are extremely heavy when compared to manual or battery tools. However, the P359 Fromm tool is one of the lightest weight pneumatic tools on the market, weighing only 19 pounds. The fact that it tensions, seals, and cuts all in the same tool saves operator energy and makes the process much more effective.
Because this is such a heavy duty tool, it is important that the strapping holds up for the applications it is banding. Poly strapping has the highest shock resistance of any type of strapping and it also has a high elongation, which means tighter packaging upon transport. Unlike steel strapping, plastic strapping doesn't leave scratch marks or rust stains on whatever is being packaged, and because there are no sharp corners, it is much safer for the operator to handle. If you like the Fromm family of tools, but think the P359 is a little heavier than you need, there are similar tools that can accomplish the same functions for different strapping sizes. The Fromm P356 is a plastic strapping combo tool similar to the P359 but it uses strap sizes 58"- 34" and can pull up to 830 pounds of tension. For even lighter applications, the Fromm P355 uses 38"- 58" strapping and can pull up to 470 pounds of tension.

Strap Qualities: Polyester (PET)
Strap Dimensions: 1" or 1.25" x .040 - .053
Max. Tension: 1, 570 lbs.
Sealing Type: Friction-weld sealing
Weight: around 19 lb.

Allstrap Opinion: Fromms P359 pneumatic combination tension and weld tool is awesome! It pulls great tension, and can use the strongest PET strapping on the market (click to link). The P359 is the safest pneumatic tool to use on HD PET strapping thanks to brains in the tool that guarantee the weld sets. This is the only pneumatic powered strapping tool that locks the weld down, effectively eliminating the risk of an operator pulling the tool open before the weld is solid.
View Complete Details

HD Poly Tensioner Cutter

  • Model No. ASC370
This is the toughest plastic tensioner with cutter tool available. It is very easy to use, and its steel construction makes it very durable. This tool received Allstrap's, Best in Class award.
View Complete Details

Battery Powered Combination Tool

  • Model No. BXT2-16
  • Tool weight: 9 lbs.
  • sizes 3/8"- 1/2" - BXT2-10 5/8"- 3/4" - BXT2-19 1"- 1 1/4" - BXT2-32
  • width 1/2"- 5/8" x .016"- 0.41"
The BXT2 series tools have a great reputation as being easy, fast and tough tools, and they're an Allstrap favorite. BXT2 16 runs on a BOSCH Lithium-Ion battery which extends its lifespan and lasts longer than other batteries. The brushless motor takes away a lot of maintenance issues and time, making this tool reliable on any workroom floor. The BXT2-16 can be switched between semi-automatic and full auto mode.

Versatility
The Signode BXT 2-16 is so easy to use. Slide the banding under the gripper foot, push the button and sealing, welding and cutting all happen automatically! Rather than juggling between heavy manual tools, the battery combo tools take all of the work out of banding, and we guarantee your linemen will love it!

The BXT2 tool series is available in 3 different sizes:
38"- 12" - BXT2-10
58"- 34" - BXT2-19
1"- 1 14" - BXT2-32

This Signode tool is manufactured by Orgapack, and is virtually the same tool as the Orgapack OR-T 250. The purchasing decision between the two tools usually lies in the brand preference.

Tool Repair
All wear parts and other parts for the BXT2-16 can be ordered below in the "Order Parts" tab! Common BXT2-16 wear parts include:
428773 Tension Wheel
428775 Tooth Plate
428843 Knife
428762 Ball Bearing
428763 Spacer Disk

Specifications
Strap qualities: Polyester and polypropylene
Strap width: 12"- 58" x .016"- 0.41"
Tension: Up to 560 lbs.
Sealing: Friction weld
Light tension: 88-335 lbs.
Tool weight: 9 lbs.
View Complete Details

Grip Pack Battery Powered Cutter

  • Size 1-1/4" x .050
  • Weight 7.5 lb.
The Signode grippack cutter is the all new battery operated cutter for steel or plastic strapping! This lightweight battery operated grip pack cutter, makes it easier for the operator to stay safe while using plastic or steel strapping. With minimal effort, cut up to 2 pieces of 1-14 x .050 strap offering two modes of operation; a button for loose strap to maximize the cutting speed and one for tensioned strap to grant operator safety. Call Allstrap for details.

From the Manufacturer: In the tensioned strap mode, the GripPack cutter holds the tensioned strap in place during cutting and keeps one end of the strap in its serrated jaws after cutting. The result is one-handed operation that allows operators to safely position themselves away from the single rebounding strap end.

Strapping: Steel or plastic strapping
Size: 1-14" x .050
Cutting Rate: 250 cuts per charge
Weight: 7.5 lb.
Part Number: 8007700
View Complete Details

Heavy Duty Jumbo Cord Tensioner

  • Model No. EP-1190
  • size 5/8" - 1 1/4"
The EP1190 is the biggest cord tensioner hand tool available
> Ideal for flat packages, to be used with cord strapping size 58" - 1 14"
View Complete Details

Steel Strapping

  • weight 102 lb
Steel banding is sold per hundred pounds (CWT), with actual weight billed (i.e. 1.02 CWT). You should use steel when your pallet weighs more than 4000 pounds.

12 inch x .015 inch has break strength of 860 pounds and 39.3 feet per pound.
Type: Steel strapping is edged, painted black, and waxed.
Weight: Coil weight 102 lb. +- 10%, 12 Coils per skid, core 16 x 3 mill (oscillated) wound.

12 inch x .020 inch has break strength of 1, 150 pounds and 29.4 feet per pound.
Type: Steel strapping is edged, painted black, and waxed.
Weight: Coil weight 105 lb. +- 10%, 12 Coils per skid, core 16 x 3 mill (oscillated) wound.

12 inch x .023 inch has a break strength of 1, 320 pounds and 25.6 feet per pound.
Type: Steel strapping is edged, painted black, and waxed.
Weight: Coil weight 102 lb. +- 10%, 12 Coils per skid, core 16 x 3 mill (oscillated) wound.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Allstrap Steel & Poly Strapping Systems LLC)
  • Columbus, OH 43212 map
  • Share us via