Our Products #4964351

Identification Ex II 3D Ex tD A22 IP65 T80C
Rated insulation voltage 400 V
Rated operating voltage 240 V AC
Conventional thermal current10 A
Utilization category switching capacity:
AC 15 240 V 3 A
Mechanical switching frequency max. 10 min.
Mechanical service life
2 x 106 switching cycles
2 NC 2 NO
B10d: 4 million
Suitable for zones 22 (3D)
Admissible ambient temperature 20 C to +60 C
Protection class IP 65 according to IEC 60529
Metal enclosure

Operating voltage range max. 30 V DC
NAMUR output
Ambient temperature 25 C to +60 C
Protection class IP 67
Cable from 2 x 0, 14 mm up to 2 x 0, 5 mm
Metal enclosure from M5 up to M30
Suitable for zones 2, 22 (3G3D)

Standard switch conforming to DIN EN 50041
Standard actuator conforming to DIN EN 50041,
Type A, B, C, D
Protection class IP 66 to VDE 0470 T1
Aluminium pressure die-casting enclosure
Sheet aluminium cover
Actuator can be repositioned by 4 x 90
Cable entry M20 x 1.5
Metal actuators for high loads

Feed-Through
Color Feed-Through
Multi Level
Multi Connection
High current
Ground
Fuse
Disconnect
Integrated electronics, standard and custom
Three Wire Sensor
Diode
Indicator
From 300V, 10A, 22 AWG up to 600V, 145A, 10 AWG.

Certification Ex II 2G Ex d IIC T6
Rated insulation voltage 250 V
Rated operating voltage 230 V AC
Conventional thermal current 5 A
Utilization category switching capacity: AC 15 240 V 3 A; DC 13 250 V 0, 27 A
Mechanical switching frequency max. 120 min.
Mechanical service life 2 x106 switching cycles
1 NC 1 NO
B10d: 4 million
Suitable for zones 1, 2 (2G )
Admissible ambient temperature 20 C to +60 C
Protection class IP 66 according to IEC 60529
PEI enclosure

Protection class IP 66 to IEC 60529 (special seal)
Identification
II 2G Ex e IIC Gb
II 2D Ex tD A21 IP 65 (CA)
II 1D Ex ta IIIC Da IP 66
Impact strength > 7 joules (CA)
up to CP-230 4 joules
as from CP-240 > 7 joules
Operating temperature 55 C to +100 C (special seal)
CA
Enclosure colour: RAL 7001 (silver grey)
Powder-coating corrosion protection
CPCPS
Enclosure colour: RAL 7000 (squirrel grey) CP
RAL 9005 (jet black) CPS
UV resistance

Maximum strain relief through clamping range
Trapezoidal thread with high torque guarantees tight and permanent fit of the dome nut
Gas tight and watertight