AMETEK Interconnect Technologies

Series 8100 – This commercial equivalent series meets or exceeds the requirements of MIL-DTL-26482 Rev C. The 8112 and 8115 shell styles are dimensionally equivalent to MS3113H and MS3114H respectively, but are supplied without the interfacial seal. MS3112 does not specifically provide for a hermetic class; however Sealtron’s 8113 shell style has the same mounting and mating characteristics and can be used when a flange mount is desired. Series 8300 – This series meets or exceeds the requirements of the latest revision of MIL-DTL-26482 Series I. The 8312 and 8315 shell styles are dimensionally equivalent to MS3113H and MS3114H respectively and are supplied with the interfacial seal. MS3112 does not specifically provide for a hermetic class; however Sealtron’s 8113 shell style has the same mounting and mating characteristics and can be used when a flange mount is desired. Series 6300 – This series meets or exceeds the requirements of MIL-DTL-26482 Series II and the dimensional requirements of these MS numbers; MS3443, MS3440, MS3442 & MS3449. These hermetic connectors are supplied with tin plated mils steel shells and Gold plated contacts. For severe environments, Sealtron also manufactures these connectors in 300 series Stainless steel bodies. To improve moisture resistance these receptacles are supplied with interfacial seals which have the “cork and bottle” design.

Hermetic Seal Corp manufactures a range of ruggedized multiple pin pressure bulkheads that combine a glass-to-metal-sealed core with an over molded thermoplastic jacket. The CPX range has been tested to 35, 000 PSI at 204ºC and is designed for use in the demanding conditions found in the downhole oil and gas industry. We also make PEEK single feed thru's that are designed to withstand temperature and pressure combinations that reach 20, 000 PSI at 200ºC. HSC also supplies the mating socket and Viton boot kits.

The HTX is Hermetic Seal’s answer to the need for extreme harsh environment Hermetically Sealed Interconnects! Incorporating the latest Material Science, HSC has developed the next generation of Very High Temperature & High Vibration Interconnect system. Mated pairs available, dimensionally equivalent to MIL-DTL-83723 and EN2997

Series 6500 – This series of hermetic connector meets or exceeds the requirements of MIL-DTL-83723 Series III, threaded style coupling and M8372388, M8372389 and M8372390. This specification is an upgrade to MIL-DTL-26500 and has the same mounting dimensions. Series 6600 – This series of hermetic connector meets or exceeds the requirements of MIL-DTL-83723 Series III, bayonet style coupling and M8372379, M8372380, M8372381, M8372393 and M8372394.

Hermetic Seal Corporation specializes in the customizing of any of its products to meet your specific project needs with in-house machining, glass pre-form manufacturing and an extensive testing capability. Customization may take the form of, but is not limited to: • Alternate body diameters and lengths • Alternate pin diameters, lengths and termination types •Specialty materials and finishes (Including Aluminum) • Alternate insert arrangements o We can design an insert arrangement with any combination of pin diameters to meet your needs for both power and signal throughput • Socket contacts • Rear release crimp socket contacts • Higher Dielectric Withstanding Voltage rating • Alternate O-ring materials and groove configurations suitable for custom mounting needs • Guide pins for blind mating applications • Threads on housings to allow attachment of back-shells or next level assemblies • Threaded inserts or threaded bushings in flange mounting holes • Alternate glass materials to withstand special circumstances, such as: o Stable Insulation Resistance values at high temperatures o Temperatures up to 800ºF (426ºC) at lower pressures o Extreme levels of thermal cycling (-85ºF to +800ºF or -65ºC to +426ºC) at lower pressures • Precious metal plated surfaces on the housing to improve ground connection from the housing to next level assembly to reduce the impact of EMI conditions

Series 8000 – The need for a hermetic class, MIL-DTL-5015 style connector existed long before this class was added to the Mil-Std. Because of this, Sealtron 8000 series does not meet all specifications shown in the current Mil Spec. See Sealtron 6000 Series if connectors of the latest revision of MIL-DTL-5015 are needed. The majority of the 8000 Series are manufactured with an individual seal around each contact; however the specified test voltage may be reduced. Connectors having an all glass insert are available upon specific request, if the higher test voltages are required. For corrosive or severe ambient conditions these connectors can be supplied with bodies of 300 series Stainless steel. Series 6000 - These connectors meet the latest revisions of MIL-DTL-5015 and the applicable MS drawings. The shell can be supplied with 300 series Stainless steel or mild steel. Standard plating of the mild steel is fused Tin over Copper. Contacts are plated with a minimum of 50 micro inches of Gold. To improve moisture resistance, these parts are supplied with a “cork and bottle” designed interfacial seal bonded to the mating face.