Our Products #4817933

The Clamco 7000SW is a semi-automatic sleeve wrapper for shrink bundling applications. The intermittent motion inline 7000SW produces packages with open ends, often called a bulls-eye. This bundler can be used for wrapping a wide range of products, from trays to cartons or bottles. The 7000SW can produce an output of up to 10 packages per minute. This sleeve wrapper is designed for use with 1.24 mil polyethylene film and is well suited for bundling applications in the food, beverage, and contract packaging industries.

EASTEYS automatic bundlers offers the reliability needed to provide a bulls-eye or natural closure on trays, individual or multi-packed products.

Easteys EB30M utilizes two rolls of single wound film to produce a sleeve around the package. For easy loading, both rolls of film are low, on the same side of the machine and threaded through rollers to an inverter in the seal area. For user convenience, both the upper and lower film unwind are powered.

The overall design of the bundler is extremely rugged, built for lasting durability, and simple to use. An operator pushes the product through the film into the seal area. The 30 wide hot knife seal system is pulled down manually with magnetic hold down. The seal system is self centering. Once the package has passed through the seal system, an exit conveyor transfers the package into a recommended Eastey shrink bundling tunnel to produce a very tight and secure package.

Tabletop hi speed validatable rotary band sealer.
Unit is designed with 10" long heating zone, and 10" long cooling zone for greater flexibility in product sealing of difficult materials with temperatures up to 450 degrees +-2 degrees Fahrenheit.
Temperature, speed control and cooling bar pressure can be validated.
Extra sealing capacity allows speeds up to 60' per minute with constant secure seals of 38" or 14" wide.
Designed to seal TyvekPolymylar, Nylon, Polyethylene, Polypropylene, Laminates, Kraft, Foil and other heat sealable bags.
Seals are achieved through the use of special heavy duty wear-resistant laminated teflon bands.
Quad digital temperature controls maintain consistent heat and assures quality hermetic seals. Heat is generated from rear and front heaters or one set only as required using a simple onoff switch. Individual heating assemblies can be regulated due to Quad controls.
Easy quick changeover and cleaning of the Teflon Bands due to instant pressure release on bands placed in an open position. Uniform pressure on all sealing and cooling surfaces creates consistent quality validatable seals. Gauges are easy to read and highly visible.
Constructed from anodized aluminum and stainless steel. Hard Chrome plated sealing assemblies reduces wear.
Dual Element Thermocouple: Each thermocouple has two junctions one for the temperature controller and one for temperature verification, ports supplied.
Self contained compressed air option available, 110V, 1 Phase, 60 Cycle.
Single line embosing code available.

Supplied with Lower Carry Belts and interfaced Variable Speed Conveyor, 6 wide x 5 long, with fully adjustable stainless steel Guide Rails. Adjustable height Sealing Assembly Floor Stand with crank handle is now standard.
This continuous band sealer will seal Polyethylene, Polypropylene, Tyvek, Foil, Nylon, Co-extrusions, poly-laminates and poly-coated paper materials.
Variable speeds up to 540 inches per minute (45 fpm) with dual 3 phase inverter motor drive. Faster versions available.
Quality hermetic seals of 38 wide are standard; 14 or 18 wide are available. Seals are made by the use of special heavy duty wear-resistant laminated Teflon bands.
Digital Temperature Control with PID Autotune maintains consistent heat and assures consistently hermetic seals.
Unit is designed with 5 long heating zone and 5 long cooling zone for greater flexibility in product sealing of difficult materials with temperatures up to 450 degrees Fahrenheit.
Hard Chrome plated sealing bars followed by Nickel plated cooling bars allow for maximum wear resistance.
Electrical 110 VAC 10 amps 60 Cycle. No compressed air required.
Optional Roller In-feed Conveyor for easy product loading is available upon request.
Optional Casters for easy positioning are available upon request.
Optional Embossing Coder or Hot Ink printer for product marking is available upon request.
Options for Standup Pouches with zippers available
Custom configurations are available; inquire within our Sales Department for your unique application.

Portable USDA approved rotary table model sealing system 38" wide hermetic seal without a trim. Designed on swivel base for sealing from vertical to 45 degrees position.
Features:
Materials: PE, PP, KraftPE , Tyvek, Polymylar, FoilPE, Cryovac, Coextrusions, Polylaminates, Military Specs, Nylon.
Speeds up to 45 feet per minute.
Digital precise temperature controller up to 450 degrees plus or minus 2 degrees.
Chrome plated sealing assembly and cooling section.
NO Compressed air required.
110 V, 1 phase, 60 Cycle.
Stainless Steel Shafting throughout.

New from APM is our model TCBSDM-38 Tabletop Conveyorized Band Sealing system with synchronized lower support conveyor.
Materials: PE, PP, KraftPE, Tyvek, Polymylar, FoilPE, Cryovac, Coextrusions, Polylaminates, Military Specs, Nylon
38" wide hermetic seal
Synchronized lower support conveyor makes pouch loading easy. Speeds up to 35 feet per minute with synchronous motor drive package
Digital precise temperature controller maintains heat up to 450 degrees +2 degrees
Chrome plated sealing assembly followed by cooling section
No compressed air required, 110 V , 1 phase, 60 cycle
Stainless Steel shafting throughout
Smokeless and Odorless sealing
Unit designed with all stainless steel covers
Embossing coder available as an option

USDA approved rotary band sealing system.
Unit is designed with 10" long heating zone, and 10" long cooling zone for greater flexibility in product sealing of difficult materials with temperatures up to 450 degrees +-2 degrees Fahrenheit.
Temperature, speed control and cooling bar pressure can be validated.
Single line embosing code available.
Extra sealing capacity allows speeds up to 60' per minute with constant secure seals of 14" or 38" wide without bag top trimmer.
Designed to seal Nylon, Polyethylene, Polypropylene, Laminates, TyvekPolymylar and Foil.
Self contained compressed air, 110V, 1 Phase, 60 Cycle. No external air.
Seals are achieved through the use of special heavy duty wear-resistant laminated teflon bands.
Quad digital temperature controls maintain consistent heat and assures quality hermetic seals. Heat is generated from rear and front heaters or one set only as required using a simple onoff switch. Individual heating assemblies can be regulated due to Quad controls.
Easy quick changeover and cleaning of the Teflon Bands due to instant pressure release on bands placed in an open position. Uniform pressure on all sealing and cooling surfaces creates consistent quality validatable seals. Gauges are easy to read and highly visible.
Mounted on a heavy duty floor model adjustable stand with crank handle and can be ordered in the vertical or horizontal position. Vertical unit can be positioned over existing lower carry conveyor.
Chassis sealing assembly construction of stainless steel shafting throughout and anodized aluminum assuming longevity of-use. Chrome plated sealing assemblies reduces wear.
Dual Element Thermocouple: Each thermocouple has two junctions one for the temperature controller and one for temperature verification, ports supplied.

Unit is designed with two 5 heating sections (10 total) and two 5 cooling sections (10 total) for greater flexibility in product sealing of difficult materials with temperatures up to 450 degrees +- 2 degrees Fahrenheit.
Designed to seal KraftPE, Nylon, Polyethylene, Polypropylene, Laminates, Tyvek Polymylar and Foil.
Extra sealing capacity allows speeds up to 45 per minute with constant secure seals of 18, 14 or 38 wide without bag top trimmer.
USDA Approved rotary sealing system.
No compressed air required, 110V, 1 Phase, 60 Cycle.