Post Buy Requirement
AE
United States
Add Review

Other Products / Services

Cavity Band Pass Filters

Anatech Electronics cavity band pass lters are available in a wide range of frequencies, power levels, bandwidths, and rejection. The resonators and cavities are silver plated for low RF resistivity, in order to achieve low insertion loss and high selectivity. The RF band pass filter size depends on performance requirements, frequency of operation, RF power handling, insertion loss, and number of sections. Anatech Electonics uses the best topology required to achieve the required performance. The cavity band pass lters range in length from 1 in. to more than 18 in., depending on number of sections, insertion loss, power handling, and center frequency. Packaging and mounting options include surface mount, connectorized, printed circuit board mount, and drop-in.
Standard band pass filters can be semi-optimized to better match required requirements . Any broad range cavity RF filter can be designed in weatherproof packaging for outdoor use. All our band pass filters are 100% tested and validated for performance, and quality. Anatech Electronics can form fit in size and characteristics of any other band pass filter manufacturer, just provide us with enough information on the particular bandpass filter and we will do the rest.
View Complete Details

Band Combiners

Band combiners are designed by combining, two or more band pass filters to create a product that will combine wireless bands. Combiner can combine several wireless bands into one output normally going to an antenna covering the full operating band of the combined band pass filters. Dual band combinersmulti-band combiners
get updates weekly subscribe
standard products

band pass filtersduplexers & diplexerslow pass filtershigh pass filtersbandstop-notch filterstriplexersrf filters for wireless communicationtunable rf filtersband combinerssingle inout dual band filtersmultiplexersrf cable assembliesadaptersrf connectors
company information
applications served military defense commercial press releases articles newsletters corporate contacts contact form
guideline & support
design guidelines technical references applications technical support design capabilities filter requirements
custom products
band pass filters duplexers low pass filters high pass filters triplexers multiband multiplexers band stopnotch filters tunable band pass filters
View Complete Details

Bandstop-Notch Filters

Anatech electronics band stop filters expertise is derived from the many years of design experience, knowledge, and emphasis on customer requirements. a derivative of band stop filters are the notch filters which also are a type of band stop, but are used in many case to reject just a single frequency, or has a narrow notch band. the band stop filter requires more q factor in order to have a equivalent sharpness as oppose to band pass filters. since most filters are derived from the basic low pass filters, and then converted thru matematical process to a band stop filter, that type of filter requires more sections in order to have an equivalent pass band to reject band transition. that said the band stop filters are more complex to design, and requires carefull adjustment, and attention to the exactness of the element values in order to give the result it was intended to give.
Anatech electronics, standard band stop and notch filters are a collection listed in our library of standard product. each band stop filter was previously built and proven to work. please look up the band stop or notch filter from our library, and chances are that you will find a product that will match, or close to it. in many cases we can modify the original product to better match your requirements. if all fails and you cannot that specific band stop or notch filter, complete the custom band stop form, and we will help you get the band stop filter that matched your requirement.
View Complete Details

Ceramic Duplexers

Anatech Electronics offers Duplexers and Diplexers in different technologies, from cavity duplexers, LC diplexers and duplexers, Ceramic duplexers, and SAW duplexers. Each technology has its advantages and disadvantages ranging from the frequency range, to power handling, size, and other parameters that are better discussed in our technical write-up on various filters and their advantages and disadvantages in Filter Design Guide.
The terminology Duplexers and Diplexers has been fuzzy since the advent of wireless communication, For the purpose of discussion a Duplexer is when two band pass filters are duplexed, meaning one common input, and two output (reverse is also correct , two inputs and one output). Usually the Duplexer will duplex a receiving and transmitting signal using two band pass filters, one common input (or output), and two outputs (or inputs), and is a three port device. A diplexer will refer to a duplexed High pass and low pass where a broadband transmit and receive is necessary, it is also a three port device with a common input and two outputs.
Our Standard Duplexers and Diplexers come from the many designs specifically manufactures per our customers requirements, and well as designs that were market driven. Anatech Electronics produces Duplexers specifically geared for the wireless industry, such as GSM duplexers, all bands of LTE duplexers, UMTS, GPS L1 & L2, Mimo, and all other commercial standard wireless bands. Anatech Electronics can semi customize its existing standard duplexers, and Diplexers, shifting the center frequencies, changing connectors, and modifying the performance where possible to better meet the wanted requirements. Anatech Electronics can provide custom solution to all your Duplexers and Diplexers needs.
View Complete Details

RF Connectors

Anatech Electronics offers a variety of RF connectors, which include all coaxial RF connectors such as, SMA, N type, TNC, BNC, 716, F connectors, SMC, blind mate connectors, many more to list.
View Complete Details

LC Diplexers

Anatech Electronics offers Duplexers and Diplexers in different technologies, from cavity duplexers, LC diplexers and duplexers, Ceramic duplexers, and SAW duplexers. Each technology has its advantages and disadvantages ranging from the frequency range, to power handling, size, and other parameters that are better discussed in our technical write-up on various filters and their advantages and disadvantages in Filter Design Guide.
The terminology Duplexers and Diplexers has been fuzzy since the advent of wireless communication, For the purpose of discussion a Duplexer is when two band pass filters are duplexed, meaning one common input, and two output (reverse is also correct , two inputs and one output). Usually the Duplexer will duplex a receiving and transmitting signal using two band pass filters, one common input (or output), and two outputs (or inputs), and is a three port device. A diplexer will refer to a duplexed High pass and low pass where a broadband transmit and receive is necessary, it is also a three port device with a common input and two outputs.
Our Standard Duplexers and Diplexers come from the many designs specifically manufactures per our customers requirements, and well as designs that were market driven. Anatech Electronics produces Duplexers specifically geared for the wireless industry, such as GSM duplexers, all bands of LTE duplexers, UMTS, GPS L1 & L2, Mimo, and all other commercial standard wireless bands. Anatech Electronics can semi customize its existing standard duplexers, and Diplexers, shifting the center frequencies, changing connectors, and modifying the performance where possible to better meet the wanted requirements. Anatech Electronics can provide custom solution to all your Duplexers and Diplexers needs.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Anatech Electronics)
  • Garfield, NJ 07026 map, United States
  • Share us via