Post Buy Requirement
AU
United States
Add Review

Our Products

  1. Laboratory Equipments 15 Products available
  2. Fasteners 3 Products available
  3. Nuts Bolts And Fasteners 6 Products available
  4. Drilling Bits, Chucks & Collets 8 Products available
  5. Others 29 Products available

Other Products / Services

Cartridges

  • SERIES 8480, 8 oz. Cartridge
  • Base Materia Concrete Hollow Block Hollow Brick Solid Block (Grout Filled) Solid Brick Structural Clay Tile
AC100 Plus Epoxy Acrylate is a two-component high strength structural adhesive used to bond threaded rod and reinforcing bar into solid concrete and masonry base materials. The adhesive system can also be used to anchor into hollow masonry materials using screen tubes. The AC 100 Plus adhesive is a 100% solids, low odor, moisture insensitive formulation. The proprietary characteristics include the first formulation on the market that does not contain volatile organic compounds (VOC's) and is free of styrene and solvents. The AC 100 Plus adhesive is packaged in cartridges made from engineered plastic which are used with either a manual or pneumatically operated injection tool. The two-component adhesive chemistry is mixed and applied through a static mixing nozzle to provide an anchoring system that is consistent, cost effective and efficient.
View Complete Details

Stick-E Accessories

  • SERIES 55080, 780 Stick-E Pin (Knurled and Step Shank)
Stick-E Accessories snap directly in the nose of the Trak-lt Tool and are held in place while shooting.
View Complete Details

Epoxy

  • SERIES 8558SD, 1308+ Cartridges
  • Standard-Carton 24
T308+ is a two-component epoxy adhesive anchoring system. The system includes injection adhesive in plastic cartridges mixing nozzles, dispensing tools and hole cleaning equipment. The T308+ is designed for bonding threaded rod and reinforcing bar into drilled holes in concrete base materials.

The T308+ epoxy adhesives is a smooth paste formulation with low odor that is solvent-free, V.O.C. compliant and does not contain mercaptans. The material conforms to ASTM C 881, Type I, II, IV & V, Grade 3, Class C (with the exception of gel time). T308+ has a two-year shelf life with when stored in a dry, dark environment with temperature ranging from 40F to 95F.
Tested in accordance with ICC-ES AC308 criteria
Evaluated and qualified by an accredited independent testing laboratory for use in uncracked concrete
Cartridge design allows for multiple uses using extra mixing nozzles
Mixing nozzles proportion adhesives and provide simple delivery method into drilled holes
View Complete Details

Plastic Screen Tubes

  • Drill Diameter 1/2 in
  • SERIES 8470, 1/4" x 1 3/4" Screen Tube
The nominal diameter of the screen listed indicate the matching rod diameter. Note that hole size required for plastic screen tubes are different than that for the stainless steel tubes.
View Complete Details

Power-Bond Pump

  • Size Range 3/8" to 1" anchor rod. No. 3 to No. 8 reinforcing bar
  • SERIES 8401, Power-Bond® Pump
The Power-Bond Pump consists of a self contained 10 fluid ounce pump style cartridge in which the adhesive components are mixed. A standard manually operated caulking tool can be used in the installation of threaded rod in solid concrete.
View Complete Details

Powers Tools

  • SERIES 52013, P1000â„¢ Powers Tools
  • Tool Length 13 in
Hammer actuated, professional grade powder actuated tool. Engineered for high reliability, low maintenance and speed. This tool uses four levels of power; grey through yellow loads (levels 1-4) and 300, 8 mm head fasteners with lengths of 12" through 3" and 14"-20 threaded studs.
View Complete Details

Deck Screws Roofing Screws

  • Size Range No. 12 x 1 5/8" to No. 15 x 16"
  • SERIES 2613, Perma-Sealâ„¢ Coated No. 12 PH Deck Screw
Deck Screws are designed for attaching rigid insulation board, single ply membrane, and wood blocking to steel and wood decks. Some sizes can also be used in concrete decks. Available sizes include No. 12, No. 14, and No. 15 diameters in carbon steel with either hex washer or Phillips-style heads. The Deck Screws are used in conjunction with insulation or membrane plates and can also be used with batten bar. For corrosion protection the screws are coated with Perma-Seal coating, a proprietary fluoropolymer, which meets the requirements of Factory Mutual Standard 4470.
View Complete Details

Heavy Duty Chisels

  • Size Range Bull Point Flat Scaling Bushing
  • SERIES 0950, Heavy Duty Chisels
Heavy Duty Chisels and accessories are designed for use in a combination rotary hammer chipping tool equipped with a Spline, SDS-Max, or 34" Hex chuck. The chisels can be used for chipping applications in concrete, block, brick, and soft stone.
View Complete Details

Safety Strip

  • SERIES 50620, 0.27 Caliber Safety Strip
  • Standard-Carton 1000
The safety strip is molded in a special length to provide a visual indication that the tool is loaded.
0.27 Caliber Safety Strip for Powers P3500, PA3500, PA351, P3600, Ramset SA270, Viper, Hilti DX36M, DX451 and DX460
View Complete Details

Wedge-Bolt Orange

  • Diameter 1/4 x 3 in
  • SERIES 7215, Wedge-Bolt® Orange Tip (OT) Screw Anchors
The Carbon Steel Wedge-Bolt OT screw anchor is a specifically engineered part for the racking industry. This unique and universal anchor is available in a finished hex head design and can be easily installed with either an impact wrench or conventional hand socket. This anchor, unlike Blue tip Wedge-Bolt, can be installed with regular ANSI standard carbide drill bits with larger clearance holes.
View Complete Details

Rotary Carbide Drills

  • Drill Size 1/8 in
  • SERIES 8500, Fast Spiral Drill
Rotary Carbide Bits are designed for use in a rotation only drill equipped with a 3 jaw Jacobs type chuck. The bits meet ANSI standards with a positive rake tip and can be used to drill in soft or brittle masonry materials using rotation only. Fast spiral flutes are for fast drilling in soft to medium masonry materials such as block or brick. Deep fluted drills perform best in concrete where the wide fluting helps clean concrete chips and dust from the hole.
View Complete Details

Stainless Steel Screen Tubes

  • Drill Diameter 3/8 in
  • SERIES 7960, 1/4" x 2" Screen Tube
Screen tubes are made from a 300 series stainless steel. The nominal diameter of the screen listed indicates the matching rod diameter.
View Complete Details

Rebar Cutter Bits

  • Drill Size 1/2 x 12 in
  • SERIES 0845, Rebar Cutter Bit Size
ebar cutter bits provide a quick, easy method for drilling through mesh or reinforcing bars embedded in concrete when the drilled hole cannot be relocated. The bits are used in the rotation only mode and are designed to fit in a standard rotary drill motor with a 12" Jacobs style chuck.

When drilling with a hammer drill or rotary hammer, a it is important to stop drilling immediately when a standard carbide bit contacts steel reinforcing bar or wire mesh, otherwise the bit will fail.

If the drilled hole cannot be relocated, a rebar cutter bit is used to drill through the embedded steel. Insert the rebar cutter bit into the chuck of a standard 12" rotary drill. Place the bit into the partially drilled hole until is contacts the mesh or reinforcing bar. Drill through the embedded steel with the rebar cutter bit. Once the bit has drilled through the steel, remove the debris from the hole, then continue drilling with the standard carbide tipped bit using a hammer drill or rotary hammer.
View Complete Details

Concrete Auger Bits

  • Drill Size 1 3/4 in
  • SERIES 0985, Spline Shank Bit
Concrete auger bits are a one piece unit designed for use in a rotary hammer equipped with a Spline or SDS-Max chuck. The efficient design of these bits provides faster drilling with reduced vibration and noise. They are ideal for producing larger diameter, deep holes and are best suited for drilling through walls or foundations.
View Complete Details

Heavy Duty Straight Shank Bits

  • Drill Size 1/8 x 3 in
  • SERIES 0501, Heavy Duty Straight Shank Bits
Heavy Duty Straight Shank Carbide Bits are designed for use in a hammer drill equipped with a 3 jaw Jacobs type chuck. The bits meet ANSI standards and can be used to drill in concrete, block, brick, and soft stone.
View Complete Details

Assemblies

  • Head Diameter 0.300
  • SERIES 50363, 0.300 Head Pins with Celling Clip
Assemblies are combinations of drive pins and stamped steel clips designed for specific applications. The pins are held within the clip using either a dome mechanism or a metal top hat.

For applications suspending acoustical ceiling systems or light fixtures, several styles of angled clips are pre-mounted onto pins.
Celling clip without dome.
View Complete Details

EIFS Pin

  • Length 1 1/2 in
  • SERIES Item # 50282, EIFS Pin
EIF5 Pins with a 0.300 diameter read 1-12" length are designed for permanently fastening to concrete or concrete block, installation systems such as, waterproofing membranes, plastic sheeting, metal lathe and wire mesh for plaster and stucco systems.

To provide resistance to pullover, these pin are pre-assembled onto a soft plastic diaphragm. Resistance to pullover is increased by the additional bearing surfaces that is provided by the diaphragm.

Discontinued item once current stock exhausted.
View Complete Details

PowerFoam Aircraft Exterior Spray

  • Material Polyurethane
  • SERIES 8130, PowerFoamâ„¢ 12 oz.
Powerfoam and TriggerFoam are one-part polyurethane expanding foams that set and cure into their final form by reacting to moisture and humidity present in the air. Their exceptional ability to bond allows Powerfoam and TriggerFoam to be applied to various building elements including the surfaces of concrete, brick, block, wood, steel, aluminum and other miscellaneous metals. Powerfoam and TriggerFoam are safe to use, containing no CFC's, no PCB's and no Urea Formaldehyde. As they are being dispensed, Powerfoam and TiriggerFoam have a neutral odor. Cured foam is physiologically harmless. Foam products are offered in standard yellow and UV-resistant black.
View Complete Details

TriggerFoam Aircraft Exterior Spray

  • Material Polyurethane
  • SERIES 8136, TriggerFoamâ„¢ 29 oz.
Powerfoam and TriggerFoam are one-part polyurethane expanding foams that set and cure into their final form by reacting to moisture and humidity present in the air. Their exceptional ability to bond allows Powerfoam and TriggerFoam to be applied to various building elements including the surfaces of concrete, brick, block, wood, steel, aluminum and other miscellaneous metals. Powerfoam and TriggerFoam are safe to use, containing no CFC's, no PCB's and no Urea Formaldehyde. As they are being dispensed, Powerfoam and TiriggerFoam have a neutral odor. Cured foam is physiologically harmless. Foam products are offered in standard yellow and UV-resistant black.
View Complete Details

Toggle Bolts

  • Size Range 1/8 x 2 to 1/2 x 6 in
  • SERIES 4023, Combo Mushroom Head
The Toggle Bolt is a spring wing type hollow wall anchor designed for use in block, wallboard and other hollow base materials. The Toggle Bolt is a two-part assembly consisting of a machine screw and a spring wing toggle. Sizes range from 18" x 2" to 12" x 6" with combo round, flat, mushroom, tie-wire or slotted hex head styles.
View Complete Details

Anchor Seal Plugs

  • Hole Size 7/16 in
  • SERIES 7936, 3/8" Anchor Seal Plug
Anchor seal plugs are designed for use with anchor installations in ceilings and wall applications. The plugs help retain the adhesive in the anchor hole and hold the anchor rod centered in the hole until the adhesive sets. The plugs are described by the anchor rod diameter they are used with.
View Complete Details

Triggerfoam Tools

  • Material Polyurethane
  • SERIES 8129, Foam Starter Kit
Powerfoam and TriggerFoam are one-part polyurethane expanding foams that set and cure into their final form by reacting to moisture and humidity present in the air. Their exceptional ability to bond allows Powerfoam and TriggerFoam to be applied to various building elements including the surfaces of concrete, brick, block, wood, steel, aluminum and other miscellaneous metals. Powerfoam and TriggerFoam are safe to use, containing no CFC's, no PCB's and no Urea Formaldehyde. As they are being dispensed, Powerfoam and TiriggerFoam have a neutral odor. Cured foam is physiologically harmless. Foam products are offered in standard yellow and UV-resistant black.
View Complete Details

Adhesive Installation Accessories

  • SERIES 7914, Extension Tubing (25 feet)
Adhesive installation accessories are designed to provide a dispenser or mixing nozzle extension when required and to aid in the preparation of the anchor hole.
View Complete Details

Forming Pins

  • Head Diameter 0.205
  • Shank Length 62mm - 2-1/2" 44mm-1-3/4"
For concrete forming applications, the 1-34" (44mm) pin is designed for fastening wood members up to 34" in thickness while the 2-12" (62mm) pin is designed for wood members up to 1-12" in thickness. The pin has a break off groove 1" from te point to allow the wood forming members to be easily removed.
View Complete Details

Powers Track-It Tools

  • SERIES 55011, Trak-lt® Tool
  • Anchor Material Carbon Steel
Trak-lt Fasteners and Blue Nailer-Gas Fuel Cells are designed to be used with the Powers Trak-It Tool and can also be installed with the ITW Ramset TrakFast tool. Ten fasteners are collated on each patented, plastic top hat-style strip. Use for light duty static applications such as drywall track to concrete, block or steel, lath to concrete or block, furring strips to concrete or block, and plywood to concrete or block base materials. The fuel cell, with its unique right angle metering valve, contains enough gas to install up to 1200 fasteners. Each package contains 1000 fasteners and 1 fuel cell.
View Complete Details

Powder Loads

  • SERIES 50500, 0.22 Caliber "A" Low Velocity Load
Powers offers high quality powder loads, produced by the largest manufacturer in the United States, with unsurpassed quality and reliability. Specific load types are designed for each unique powder actuated tool. They are offered as single units for single shot tools and collated in groups of 10 into plastic strips or metal discs for semi automatic tools.
View Complete Details

Stress Plates

  • Size 3" Round
  • Material Galvalume
  • SERIES 3880, Insulation Plate for Philips Pan Head Screw
Stress plates are designed for use with Deck Screws, SPIKE anchors, and Speed Lock toggles. Stress plates can be grouped into two categories; insulation plates and membrane plates. Insulation plates, as the term implies, are used when mechanically attaching rigid foam insulation to roof decks. They are manufactured in a 3" diameter for use with No. 12, No. 14, and No. 15 Deck Screws, 316" and 14" SPIKE anchors, and 14" Speed Lock Toggles. Two carbon steel plates, a Type 304 stainless steel plate, disc are available. A recessed plate is available for use with the No. 12 hex washer head screws. For corrosion resistance, a Galvalume coating is applied to the carbon steel plates. Membrane plates, sometimes called lap plates, are used when mechanically attaching single ply material in the area of the lap or seam. They are manufactured in a 2" diameter for use with No 12, No. 14, and No. 15 Deck Screws, 316" and 14" SPIKE anchors, and 14" Speed Lock Toggles.
View Complete Details

Epoxy Injection Adhesive Anchoring System

  • SERIES 05005D, PE1000 Cartridges
  • Base Material Grounted Concrete Masonry Normal-weight Concrete
The PE1000+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The PE1000+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base and solid masonry materials.
One PE1000+ mixing nozzle is packaged with each cartridge.
PE1000+ mixing nozzles must be used to ensure complete and proper mixing of the adhesive.
View Complete Details

Brushes

  • SERIES 7931, 1/2" x 8 1/2" Brush
Adhesive installation accessories are designed to provide a dispenser or mixing nozzle extension when required and to aid in the preparation of the anchor hole.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Anchors Unlimited, Inc.)
  • Verona, PA 15147 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/anchors-unlimited-inc-company5207600/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0010458088{main}( ).../index.php:0
20.03592085904include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.04872808552include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.05803744264header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice