Post Buy Requirement
AT
United States
Add Review

Our Products

Fomblin Vacuum Pump Fluids

  • Weight 16 lbs
  • Series PFPE YL-VAC 06-6
Fomblin PFPE YL-VAC 06-6 vacuum pump fluids are non-flammable, chemically inert, and thermally stable. When used with proper pump filtration, Fomblin PFPE YL-VAC fluids provide exceptionally long service life. These fluids have excellent lubricity properties and are available in viscosity grades suitable for use in all vacuum pumps. Consult your Inland sales representative or engineer for assistance in selecting the proper viscosity grade for your specific pump and application.
View Complete Details

Pennzoil 2-Cycle Air-Cooled Engine Oil

  • WEIGHT 5 lbs
Pennzoil 2-Cycle Air-Cooled Engine Oil is formulated with high quality Pennzoil tough film base stocks and an additive package designed specifically for air-cooled engines. Air-cooled engines run hotter than water cooled outboard engines and require a lubricant formulated for their unique lubrication requirements. Applications such as small maintenance equipment can run extremely hot. Dust and dirt on the cooling fins increase the severity. Pennzoil 2-Cycle Air-Cooled Engine Oil contains a unique combination of detergents and ash-free dispersants to protect against high-temperature deposits and ring sticking, plug fouling and port plugging. Anti-wear protection for the high rpm needle roller bearing commonly found in small air-cooled engines is also critical.

High temperature protection
Protects against deposits and ring sticking
Ideal for air cooled two-cycle engines
For premix or injector systems
Protects bearings and pistons from wear and sculling
Minimizes spark plug fouling
Minimizes exhaust smoke
Prediluted for easier gasoline mixing
Dyed blue for case of identification
Prevents port plugging
View Complete Details

Pennzoil GT Performance Motor Oil

  • Series 20W-50
  • WEIGHT 3 lbs
Pennzoil GT Performance SAE 20W-50 Motor Oil is a high performance lubricant formulated for passenger car and utility vehicle engines. It maintains thick oil films for added protection in hard working engines and hot climates. Pennzoil keeps your engine clean by isolating contaminates before they result in deposits within your engine.
View Complete Details

Eastman Turbo Oil

  • Item Number: 2389
  • CONTAINER SIZES Quart, Case (24 Quarts), 55 Gallon Drum
Eastman Turbo Oil 2389 is a low viscosity gas turbine oil, offering exceptional cold-start capability.

Many large commercial airlines use Eastman Turbo Oil 2389 in their auxiliary power units (APUs), because of the reliability it affords this equipment when starting after long, cold-soaks at altitude. Eastman Turbo Oil 2389 is the only MIL-PRF-7808 Grade 3 qualified oil that is fully approved in all Honeywell and Hamilton Sundstrand APUs. Eastman Turbo Oil 2389 is formulated from synthetic base stocks and advanced technology additives, to provide the combined thermal and oxidation stability properties of commercial Type II lubricants, with the low temperature fluidity characteristics of a 3 centistoke oil. It also has load-carrying ability equal to, or better than, other approved MIL-PRF-7808 Grade 3 oils.
View Complete Details

Pennzoil Conventional Motor Oil

  • Series 10W-40
  • CONTAINER SIZE 12 x 1-Quart Cans (Case), 55 Gallon Drum
Pennzoil Conventional Motor Oil with Active Cleansing Agents in SAE 5W-20, SAE 5W-30, and SAE 10W-30 viscosities continuously helps prevent dirt and contaminants from turning into performance robbing deposits, helping keep your engine clean to maintain responsiveness. It meets or exceeds the engine protection required by ILSAC GF-4 (5W-20, 5W-30, 10W-30) or API SM and is specially formulated to provide extra protection against the harmful effects of stop-and-go driving and high and low-temperature engine operation

Helps keep engines clean
Provides wear protection
Controls high-temperature oxidation and deposits
Helps protect emissions systems
Low-friction formula helps improve gas mileage (SAE 5W-20, SAE 5W-30 and SAE 10W-30) compared to higher viscosities or older service categories
Protects engines under severe driving conditions to help prolong engine life
View Complete Details

Quaker State Synthetic Blend Motor Oil

  • Series SAE 5W-20
  • WEIGHT 14 lbs
Quaker State High RPM Synthetic Blend Motor Oil SAE 5W-20 is specially formulated to maximize the performance and power of your high output engine. When heat and stress are at their most severe, special heat-activated additives are unleashed to provide a low-friction, heat-resistant lubrication film. This advanced protective layer helps reduce the coefficient of friction, prevent oil shearing and resist thermal breakdown even in engines that red line at 8, 000 RPM. The result: less friction, better protection at high RPMs, and best of all maximum power with an oil that stays in grade.
View Complete Details

Pennzoil Platinum Engine Oil

  • Series 5W-30
Pennzoil Platinum full synthetic 5W-30 engine oil with superior Active Cleansing Agents continuously attacks potential and stubborn deposits to help keep the engine clean. It also contains special protective additives for our ultimate engine protection that exceeds USA and European industry standards like ILSAC GF-4, API SM and ACEA performance. Pennzoil Platinum is designed to provide our ultimate cleansing under the most severe driving style or conditions to maximize engine responsiveness.
Superior Active Cleansing Agents
Cleans up to 46% of existing sludge
Continues to clean existing sludge in the second oil change
All standard grades of Pennzoil Platinum are engineered with our unique Adaptive Molecules. These molecules are designed to:
Maintain viscosity control under high heat
Prevent viscosity loss due to shearing by reforming continuously
Withstand extreme pressures at critical points by clustering together, acting like microscopic shock absorbers to absorb the impact
Superior clean up to our conventional and synthetic blend formulations
Unsurpassed wear protection
Full synthetic performance to resist oil breakdown and development of deposits
View Complete Details

Pennzoil Long-Life Grease Syn Hub

  • WEIGHT 35 lbs
Pennzoil Long-Life Grease Syn Hub Plus 00 is formulated specifically for the lubrication of truck wheel hub assemblies. Manufactured from stable polyurea thickener and polyalphaolefin synthetic base stocks, this aqua coloured grease offers excellent protection for wheel hub bearing assemblies over a long service life. The polyurea thickener in Long-Life Grease Syn Hub Plus 00 offers extreme resistance to oxidation in service. The NLGI 00 consistency of LONG-LIFE GREASE SYN-HUB PLUS 00 offers the additional protection of not running out of wheel bearing assemblies onto brake shoes and pads, which virtually eliminates lubricant effects on brake fade and failures.

Long-Life Grease Syn Hub Plus 00 further provides excellent protection against rust and corrosion. Pennzoil Long-Life Grease Syn Hub Plus 00 is fortified with a unique, solids based extreme pressure and anti-wear system to provide excellent protection against premature wear of wheel bearings. Long-Life Grease Syn Hub Plus 00 is non-corrosive to all types of metals.
View Complete Details

Pennzoil Marine XLF Outboard Two-Cycle Oil

  • Series TC-W3
  • WEIGHT 26 lbs
Pennzoil Marine XLF Outboard Two-Cycle TC-W3 Oil is a premium Synthetic Blend certified by the National Marine Manufacturers Association (NMMA) as an approved NMMA TC-W lubricant and is specifically designed for exceptional performance in marine applications.

Pennzoil Marine XLF Outboard Two-Cycle TC-W3 Oil is a synthetic blend product formulated for excellent protection of new engines and to provide additional protection for older engines.

Pennzoil Marine XLF Outboard Two-Cycle Oil contains only ashless components which helps prevent any lubricant related preignition and spark plug fouling. The ashless additives also help protect against piston and combustion chamber deposits, rust, and corrosion. Its anti-gel properties help resist gel formation due to water or other contamination. The special base stocks used resist piston and cylinder wall scuffing.
View Complete Details

Pennzoil High Mileage Vehicle Motor Oil

  • Series SAE 5W/30
  • CONTAINER SIZE 6 x 1-Quart Cans (Case), 55 Gallon Drum
Pennzoil High Mileage Vehicle motor oil SAE 5W30 is formulated to meet the needs of vehicles that have accumulated more than 75, 000 miles with its Active Cleansing Agents that continuously help prevent dirt and contaminants from turning into performance robbing deposits, helping keep your engine clean to maintain responsiveness.

Pennzoil High Mileage Vehicle motor oil 5W30 is blended to higher viscosity and lower volatility than our conventional oils to reduce oil consumption due to burn-off. Pennzoil High Mileage Vehicle motor oil is blended to the higher end of the viscosity range, and incorporates a special seal-conditioning agent that helps reduce leaks from worn or stiff seals.

Active Cleansing Agents
Low volatility
Seal-conditioning agent
Higher viscosity Actively helps keep high mileage engines clean
Helps restore engine performance and extend engine life
Helps condition engine seals
Helps prevent engine leaks and oil burn off
Provides enhanced protection for worn engine parts
Helps reduce oil consumption
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Applied Thermal Fluids)
  • La Palma, CA 90623 map, United States
  • Share us via