Our Products #1790004

Evaporex Microplate Evaporators (EVX)
High-Performance Drydown for Microplates

Evaporex (EVX)
is purpose-built for high-performance drydown of
microplates for drug discovery and research applications.
EVXs two stainless steel needle assemblies evenly distribute
heated gas into microplates from both top and bottom
minimizing drying time. Thus, saving time in the discovery
process. The upper gas flow path is sealed away from the
heating elements in a stainless steel pathway preventing
sample contamination. The lower platform adjusts to allow
the needles to come in close proximity to the sample
without touching. EVX Series Microplate Evaporators
For aqueous or organic solvents (not dry or concentrated acid solutions)
Fit under common hood or micro-ventilation system setups
User-adjustable flow rates and gas temperatures
for temperature-sensitive drying
Easily removable upper and lower assemblies for quick
and easy cleaning
Single (EVX-96) or dual-plate configurations (EVX-192)
96 and 384-well formats
MODELS
EVX-96 EVX-192
Aqueous or non-corrosive liquids from shallow or deep well
microplates. Dual heat source.
EVX-96T1 EVX-192T1
Strong acids or halide-containing organics. Dual heat source.
Teflon coated head on top.
EVX-96T2 EVX-192T2
SPE or filtration plates. Dual heat source.
Teflon coated head on top and bottom.
EVX-96-384 EVX-192-384
Use with 384 plates. Dual heat source with 384 channel
head on top.

SPECIFICATIONS
Weight: EVX96
EVX192
25 lbs
31 lbs

Power: 110 or 220 VAC, 50 or 60 Hz
Dimensions:
EVX96
9.52W x 12.05D x 15.72H
(242mm W x 306mm D x 400mm H)
EVX192
10.00W x 15D x 15.5H
(254mm W x 381mm D x 394mm H)

Inlet Gas Connection 14"
Inlet Gas Pressure Minimum 15psi, Maximum 65psi
Minimum Operation Flow Rate 25 liters per minutes (LPM)
Maximum Operation Flow Rate 60 liters per minutes (LPM) (EVX96), 90 liters per minutes (LPM) (EVX192)
Maximum Operating Gas Temperature 60C (upper head) 80C (lower head)
Dimensions 9.52"W x 12.05"D x 15.72"H (242mm W x 306mm D x 400mm H)
Power Consumption 405 W nominal
Operating Temperature 50 - 100 F
Warranty 12-month extensive manufacturer warranty. Extended 12-month warranty and Annual Service plan are also available. Contact factory or authorized dealers for detail
(Why choose the Microplate Evaporators EVX96, EVX192? one-sheeter link to the pdf)
Microplate Evaporators one-sheeter introducing the EVX96 and EVX192.

We are main supplier of this product.

Now you can have the benefits of high-performance multichannel pipetting at an easy price point. The i-Pipette is based on proven automated pipetting engineering from liquid handling experts Apricot Designs. Apricot Designs has been continuously developing, improving and offering multichannel pipettors for more than two decades. This expertise has been focused on bringing automation capabilities within reach of every lab. The i-Pipette automated pipettor is also the perfect solution for laboratories with larger multifunctional automated liquid handling platforms for situations when a quicker and easier system is needed to perform basic operations without the need for excessive training and method programming.

The i-Pipette automated pipettor uses Apricot Designs unique head design which employs high-precision manufacturing to produce reasonably priced heads that are independent of the pipetting mechanism. The user can clamp the pipetting head in a manner of seconds using a simple lever for the basic series or via push-button control for the pro series, allowing simple and easy set-up for the task at hand. For the most flexibility, the i-Pipette allows manual indexing of the pipetting head for accessing 384-well plates with a 96-channel version or for accessing 96-well plates with a 384-channel version (with 96-channel head), and also uses manual indexing for serial dilutions by column.

Features and Benefits
Performs 12 times faster than an 8-channel handheld pipettor; pipette to all 96 wells without having to replace tips 12 times.
Reduce the tedium and potential repetitive motion injuries that come with multiple hand-held pipettings with an 8-channel pipettor.
Flexible design for liquid transfers and pipetting operations for 96 and 384-well microplates.
Uses the unique easy-change head system from Apricot Designs, allowing the user to build a diverse head library with a reasonable investment. The heads are interchangeable with other Apricot pipettors.
Uses the unique EZ-Load disposable tips for the simplest no-tool, no-pressure loading of tips.
Easily controlled through a simple interface on the iPod Touch; requires minimal operator training and no external computer is necessary.
Small footprint conserves bench space and fits easily into suitably-sized hoods.
Includes manual indexing plate to allow work with 96 or 384 plates (use indexer to work with 384 plates on 96-channel pipettor or to work with 96 plates on 384-channel pipettor).
Specifications
Dispensing Precision

The Personal Pipettor (PP) is a popular series of affordable liquid handling systems with the versatility and reliability required for todays demanding laboratory environment. The PP series offers the majority of automated features that many laboratories need at a reasonable price, making it possible for each technician to truly have their own personal pipettor. This is the ORIGINAL "Personal Pipettor", introduced by Apricot Designs in the 1990's as the groundbreaking approach to high-performance, lower-priced automated pipetting.

The PP-M series uses Apricot Designs unique head design which employs high-precision manufacturing to produce reasonably-priced heads that are independent of the pipetting mechanism. The PP-M electronically clamps the pipetting heads in a manner of seconds, allowing simple and easy set-up for the task at hand. It will automatically index the pipetting head via software programming if necessary for accessing 384-well plates with a 96-channel version or 1536-well plates with a 384-channel version. It also will automatically index for performing serial dilutions by column or row.

Features and Benefits

Flexible design for liquid transfers and pipetting operations for 96 and 384-well microplates and can also be used for serial dilutions by row or column.
Uses the unique easy-change head system from Apricot Designs, allowing the user to build a diverse head library with a reasonable investment. The heads are interchangeable with other Apricot pipettors.
Uses the unique EZ-Load disposable tips for the simplest no-tool, no-pressure loading of tips.
5-position deck with wash station allows walkaway reformatting of 4x96 to 1x384 or 1x384 to 4x96.
Small footprint conserves bench space and fits easily into suitably-sized hoods.
PP-96L-M model: Low-volume version with 96 125 ul pipetting channels for optimal pipetting as low as 0.5 ul.
PP-96H-M model: High-volume version with 96 550 ul pipetting channels for up to 550 ul pipetting.
PP-96H-H model: High-volume version with 96 550 ul pipetting channels with extended height for vacuum manifold or other tall accessories.
PP-384-M model: Low-volume version with 384 125 ul pipetting channels for optimal pipetting as low as 0.5 ul.
Fixed tip heads with 8, 12, 16 and 96 channels.
Disposable tip heads with 8, 12, 16 or 96 channels.
Tip washing system with recirculating pump.
Applications

Plate replication
Plate reformatting
Reagent addition
Compound addition
Serial dilution (by column)
Dispensing Precision

The Total Pipetting Solution (TPS) pipettor series are built on an open-deck platform that offers flexibility and expandability for expanded operations and increased throughput as well as flexibility to add extra devices such as shakers, heaters, coolers and magnetic bead separators. The TPS offers an excellent open platform that can be integrated with robotics in order to fully automate an assay or a sample prep process.

The TPS series uses Apricot Designs unique head design which employs high-precision manufacturing to produce reasonably-priced heads that are independent of the pipetting mechanism. The TPS electronically clamps the pipetting heads in a manner of seconds, allowing simple and easy set-up for the task at hand. It will automatically index the pipetting head via software programming if necessary for accessing 384-well plates with a 96-channel version or 1536-well plates with a 384-channel version. It also will automatically index for performing serial dilutions by column or row. The TPS will also automatically load and unload Apricot Designs ESP disposable pipette tips. The low-force loading requirement for ESP tips makes the TPS-384 model easier to use and more reliable.

Features and Benefits

Flexible design for for liquid transfers and pipetting operations for 96 and 384-well microplates and can also be used for serial dilutions by row or column.
Uses the unique easy-change head system from Apricot Designs, allowing the user to build a diverse head library with a reasonable investment. The heads are interchangeable with other Apricot pipettors.
Uses the unique ESP disposable tips for the simplest and most reliable automated tip loading.
Select from 6, 12 or 15 deck positions that can be used for plates, reservoirs, or tips for optimal walkway automation.
Intuitive graphical user interface via serial interface control.
Small footprint conserves bench space and fits easily into suitably-sized hoods.
TPS-24 model: 24-channel pipettor optimized for serial dilutions and can also can perform pipetting operations for 96 and 384 well plates.
TPS-96H model: 96-channel pipettor with configurable deck size for plate replication, reformatting, reagent addition, and serial dilutions. High-volume version with 96 550 ul pipetting channels for up to 550 ul pipetting.
TPS-96H model: 96-channel pipettor with configurable deck size for plate replication, reformatting, reagent addition, and serial dilutions. High-volume version with 96 550 ul pipetting channels with extended height for vacuum manifold or other tall accessories.
TPS-384 model: 384-channel pipettor with configurable deck size for plate replication, reformatting, reagent addition, and serial dilutions. Low-volume version with 384 125 ul pipetting channels for optimal pipetting as low as 0.5 ul.
Fixed tip heads with 8, 12, 16, 24, 96 or 384 channels.
Disposable tip heads with 8, 12, 16, 24, 96 or 384 channels.
Tip washing system with recirculating pump.
Motorized plate shaker.
Heated or cooled deck position.
Bar code scanning.
Vacuum manifold filtration station.
Refillable reservoir.
Applications

Plate replication
Plate reformatting
Reagent addition
Compound addition
Serial dilution (by column)
Specifications

Dispensing Precision

Disposable Pipette Tips

We manufacture all of our pipette tips using state of the art injection molding facilities and high quality virgin polypropylene. The pipette tips are produced in a Class 100, 000 clean room. The production facility is certified ISO 9001:2008 and ISO 13485:2003. The tips are certified to be RNase and DNase free.

We offer many types of pipette tips in different volumes. The most important factor when selecting pipette tips is that your results are the best that they can be. In order to produce the best pipetting results, the selection of the pipette tips is considered along with the head that will be used for those tips and the pipettor the head will be installed on. The pipettor, head, and tips form a triad that works together for the ideal solution. If you need help selecting the best pipette tips for you need, the following selection guide has information that will help you select the correct tip for your pipettor, which head to use, and what volume you should select. Or you may contact us at any time via the button above or this link, and we will be glad to provide assistance. CONTACT US To place an order: ORDERING POLICIES

EZ-Load Disposable Tips for i-Pipette and PP Pipettors

Apricot Designs offers the exclusive EZ-Load tips in a variety of formats to simplify semi-automated pipettor operation with disposable tips. When used together with an Apricot EZ-Load pipettor head, it is not necessary to use any additional tools or fixtures to load or unload tips. The EZ-Load tips simply drop directly into the head and are ready to use in seconds. This patented technology from Apricot Designs is the only system where the disposable tips do not need to be "pressed on" with excessive downward force in order to create a reliable seal. The upward clamping force onto the EZ-Load head, whether done with an easy manual lever or with a motorized clamp, will provide a simple and consistent seal which is required for the best pipetting results.

ABAR
Apricot Biologic Aliquot Robot

Consistent High Throughput Sample HandlingTransferring
Differential Centrifugation Semi-automated Blood Fractionation System

Features and Benefits
Labor saving automation reduces turn around time and sample waste
High performance pipetting provides accurate results and control of variables
Accuracy ensures data and sample integrity
Aspiratedispense into microplates or storage tubes
Consistent high throughput sample handlingtransferring
High definition camera for accurate component definition
Intuitive interface for defining blood separation levels
Bar code scanner for automated sample identificationtracking
Model
ABAR246
ABAR TTP
ABAR PLUS
Application
Processing large batches of samples for clinical testing laboratories, special chemistry labs, blood banking labs
High throughput sample handlingtransferring from tubes to plates
Additional Info
Transfer to as many as 5 racks of 96 storage tubes or microplates
Automated pipetting of liquid transfers employing disposable tips
24-position sample tube carousel
16-sample tube holder strip
Up to maximum 6 deck positions
Specification
Weight 89 lbs
Dimensions 28w x 19d x 23.5h
Power 100-240VAC, 5060 Hz
Operating temperature 50100F

The S-Pipette series multi-channel liquid handling pipettors bring automated liquid handling within reach of any lab that needs to routinely perform pipetting operations onto microplates.
Multi-channel liquid handling system. Interchangeable pipetting core.
Providing you with the flexibility to determine the configuration that best matches your application!
The S2 pipettor adds greater flexibility with automated X & Z positioning, automated plate sampling, and a removable WiFi enabled tablet.

S2 Pipettor Features and Benefits
High-performance instrument easily configured for a variety of applications
Automated pipetting into all wells of a 96-well plate with the 96 core, into all wells of a 384-well plate with the 384 core
12x faster than an 8-channel handheld pipettor pipette into all 96 wells without having to replace tips 12 times
Pipette 24, 96 and 384 full plate
Serial dilution by column: 8, 16
Automated split level plate elevators for plate sampling automatically raise or lower platereservoir to programmable height
Apricot EZ-Load tip technology to load disposable tips quickly and easily, without tools!
Control via easy to use interface Microsoft SurfaceTM Tablet (WiFi-enabled)
2-, 3-, or 4-position shuttle with programmable serial dilution indexing
Small footprint maximizes bench space and fits suitable hoods
Specifications
Dispensing Precision (96-1000)

S-Pipette is an innovative new multi-channel liquid handling system that brings automated liquid handling
within reach of any lab that routinely performs pipetting operations onto microplates.
Multi-channel liquid handling system. Interchangeable pipetting core.
Providing you with the flexibility to determine the configuration that best matches your application!

Accessing the core
1 Remove lock screws on each side of the hood
2 Raise the hood carefully
3 Still holding the hood, pull out the hood support rod and rest hood on support

Core exchange
1 Release core fasteners
2 Lift out the core in direction illustrated
3 Replace with 96 or 384 channel core

Control interfaces
No external computer needed.
Control your pipettor with intuitive touch screen, quick keys or mobile APP.

Repeatable Results
The S-Pipette + pipetting head + tips (in a variety of volumes)
= The workflow to help you get repeatable results.
EZ-Load = EZ-Change
The pipette head is separate from the
pipetting mechanism, allowing easy and
economical reconfiguration in the lab.
Changing heads only takes a few seconds
easily reconfigure as needed!
For best pipetting results consider pipette
tip selection along with the pipette head
that will be used. Features and Benefits
Multi-channel liquid handling system with an interchangeable pipetting core.
Pipette into all wells of 96-well plate with S-Pipette 96 core, or 384-well plate with S-Pipette 384 core.
More than 12x faster than an 8-channel handheld pipettor.
Pipette into all 96 wells without having to replace tips 12 times!
Adjustable split level plate elevators for individual sampling using multiple plates and a variety of SBS standard labware.
EZ-Load tip technology to load disposable tips quickly and easily, without tools!
Clamp pipetting head with simple levers.
Control via easy to use interfaces: touch screen, quick access keys, Apple iPod or iPhone.
Small footprint maximizes bench space and fits suitable hoods.

EVEN96 - SPESLE Positive Pressure Processor
Consistent Sample Preparation

The most innovative programmable positive
pressure processor available in a stand-alone unit.

Delivering precise, uniform flow control across
multiple ports for processing 96-well extraction
plates or individual columns.
Features and Benefits

Flexible Processing of Plates Columns. One platform to process 96-well SPESLE plates columns -
Readily process 96-well format SPE!SLE plates as well as individual SPESLE columns on the same platform.

Intuitive and Accurate Control Interfaces -
Control at your fingertips via Microsoft Surface Control Tablet. No external computer needed!

Precise Height Control and Superior Sealing -
Engineered for incremental control and accurate positioning.

Software Controlled, Automated Flow Rates -
Ensure reproducible SPE extractions among multiple users, of varying skill levels

Precise Flow Control -
Optimized programmable flow controller. Provides a flow range from microliters per minute (Lmin) for flow-sensitive methods to liters per minute (Lmin) for sorbent drying. Precision pressureflow control for SPE processing from very low flow rates to high flows for sorbent bed drying.

Unlimited Method Storage -
Multi-step, application-specific protocols can be created, stored, and retrieved

High Performance Internal Heater -
Internal heater for fast sorbent drying in complex extraction protocols.

Advanced Safety Features -
Manifold pinch sensor for enhanced operator safety. Pressure manifold automatically adjusts to height of SPE consumables in use to ensure maximum safety and minimum processing time

Fits within suitably sized laboratory hoods for solvent vapor control.

Compatible with most standard commercial SLE p latescolumns
Specifications
Dimensions 12.2W x 15.6D x 20.9H (310mm W x 396mm D x 531mm H
Weight Approx. 60lbs (27.2kg)
Power 100 to 240 VAC, 5060Hz
Operating Temperature 10C-37.8C 50F-100F
Heating Gas Output 50C-60C 122F-140F
Supply Pressure Range 80-150 PSI
Manifold Pressure Range 0-40 PSI

High Volume Tips for Apricot Designs Pipettors "AL" Packaging (Auto Load). The High Volume tips are compatible with the following heads for the TPS-96 or TPS-384 pipettor.

096-A-01
550-A-01N
125-A-05-55-41DN

ESP Tips for Apricot Designs TPS Series Pipettors. The TPS pipettor will automatically load and unload the correct number of tips required for the programmed operation. These tips are compatible with the following head series for TPS pipettors:

TPS24-A-01-ESP for TPS-24. Used for 24-channel single-row pipetting or 16-channel single-column pipetting for 384 well plates.
TPS24-A-01-ESP-12 Offset head for TPS-24. Used for 12-channel single-row pipetting or 8-channel single-column pipetting for 96 well plates.
TPS384-A-01-ESP for TPS-384. Used for 384-channel pipetting to 384 well plates.
TPS384-A-01-ESP-SC for TPS-384. Used for 16-channel single column serial dilution pipetting to 384 well plates.
TPS384-A-01-ESP-SR for TPS-384. Used for 24-channel single row serial dilution pipetting to 384 well plates.
TPS384-A-01-096ESP Offset Head for TPS-384. Used for 96-channel pipetting to 96 well plates.
TPS384-A-01-096ESP-SC Offset Head for TPS-384. Used for 8-channel single column serial dilution pipetting to 96 well plates.
TPS384-A-01-096ESP-SR Offset Head for TPS-384. Used for 12-channel single row serial dilution pipetting to 96 well plates.

High Volume "Strip Tips" for Serial Dilution for Apricot Designs PP Series and i-Pipette Series Pipettors. These Strip Tips are easily loaded into the following EZ-Load heads without the need for any tip-loading mechanism. These tips are compatible with the following head series for PP pipettors:

096-A-01-EZL-550-SC for COLUMN serial dilutions with i-Pipette or PP. Use with 250 or 550 ul 8-strip tips for 96 channel pipettors for 96 well plates.
096-A-01-EZL-550-SR for ROW serial dilutions for PP only. Use with 250 or 550 L 12-strip tips for 96 channel pipettors for 96 well plates.
096-A-01-EZL-1000-SC for COLUMN serial dilutions with i-Pipette or PP. Use with 1000 L 8-strip tips for 96 channel pipettors for 96 well plates.
096-A-01-EZL-1000-SR for ROW serial dilutions for PP only. Use with 1000 L 12-strip tips for 96 channel pipettors for 96 well plates.

EZ-Load Tips for Apricot Designs PP Series and i-Pipette Series Pipettors, HIGH VOLUME versions. Use these tips for pipettors with 500. 550 or 1000 ul maximum volume. The EZ-Load tips are easily loaded into the following EZ-Load heads without the need for any tip-loading mechanism. These tips are compatible with the following heads:

096-A-01-EZL-SL-550 EZ-LOAD Swinglock, use with 250 or 550 L tips.
096-A-01-EZL-SL-1000 EZ-LOAD Swinglock, use with 1000 L tips.
096-A-01-EZL-550-024-RF 24 position EZ-LOAD Swinglock for use with the Corning HTS Transwell 24 well system. Use 550 tips loaded manually to the provided Tip Collar.
096-A-01 Tip loader mechanism is required for older-style non-EZ-Load heads.
550-A-01N Tip loader mechanism is required for older-style non-EZ-Load heads.
125-A-05-55-41DN Tip loader mechanism is required for older-style non-EZ-Load heads.

EZ-Load Tips for Apricot Designs PP Series and i-Pipette Series Pipettors, HIGH VOLUME versions. Use these tips for pipettors with 500. 550 or 1000 ul maximum volume. The EZ-Load tips are easily loaded into the following EZ-Load heads without the need for any tip-loading mechanism. These tips are compatible with the following heads:

096-A-01-EZL-SL-550 EZ-LOAD Swinglock, use with 250 or 550 L tips.
096-A-01-EZL-SL-1000 EZ-LOAD Swinglock, use with 1000 L tips.
096-A-01-EZL-550-024-RF 24 position EZ-LOAD Swinglock for use with the Corning HTS Transwell 24 well system. Use 550 tips loaded manually to the provided Tip Collar.
096-A-01 Tip loader mechanism is required for older-style non-EZ-Load heads.
550-A-01N Tip loader mechanism is required for older-style non-EZ-Load heads.
125-A-05-55-41DN Tip loader mechanism is required for older-style non-EZ-Load heads.

PP-Pin Tool 4S Series Personal Pipettor

The PP-Pin Tool 4S is a specially-modified platform based on the proven Personal Pipettor series. It offers the ability to perform automated pin tool dispensing at a reasonable price. The internal pipetting mechanism has been removed since it is unnecessary for pin tool operations, and the software GUI has custom windows for controlling the pin tool. The 4 positions can be used for the sample source, destination, and a wash and blot station. Pin Tools are available from V&P Scientific for the PP-Pin Tool 4S.

The V&P pin tools are also compatible with any Apricot pipettor which means that if you want to have maximum flexibility you can use an Apricot pipettor for the 1-550 ul range and then change it quickly to a pin tool robot for nanoliter work by simply swapping the head.

Disposable Microtubes

We have a complete custom design process and also a full class 100, 000 clean room ISO 900113485 and CE certified injection molding facility. We can produce custom labware including tips, reservoirs, racks and virtually anything else you might need for your automation needs. Please contact us if you need to create something unique for your process.

To place an order: ORDERING POLICIES

If you would like to request a sample to try out please contact us by the web form, phone, or email: CONTACT US

High quality disposable microcentrifuge tubes and microtubes from Apricot Designs feature:

Made with 100% premium Virgin Polypropylene - ideal for solvent resistance, minimal fluid retention and binding, and for long term -80C storage
Snug fit snap cap provides a positive seal and can be easiliy closed with one hand
Certified RNase, DNase, protease and endotoxin free
Autoclavable at 121C, 20 minutes, 20psi
Optional extended hinge cap for DNARNA purification column encapsulation within tube
Contamination-free and leak-proof
Rated up to 15, 000xg
Flat lid surface area for easy labeling

Reusable Labware

We have a complete custom design process and also a full class 100, 000 clean room ISO 900113485 and CE certified injection molding facility. We can produce custom labware including tips, reservoirs, racks and virtually anything else you might need for your automation needs. Please contact us if you need to create something unique for your process.

To place an order: ORDERING POLICIES

Reusable reagent reservoirs from Apricot Designs feature:

300 ml capacity
Anti-splash design
Microplates fit on top of reservoir
Stackable for robotic workstation
Polyproplyene material suitable up to 121C
Dimensions 132.6mm(5.22") width x 90.4mm(3.56") depth x 39.6mm(1.56") height
Order Number: 300-3DBR (available in quantities of 10 or cases of 50)

Built for Discovery ADDA High-Speed Dual Arm Autosampling System

The ADDA system is a dual-arm, high-speed autosampler that provides ADME discovery scientists with the fastest high-quality sample delivery platform available for LCMS. At 8 seconds per sample in trapelute mode, and with 8 unique injection ports, the ADDA system is a comprehensive system designed for the Discovery lab. With the ADDA system, permeability, transport, metabolic stability and drug-drug interaction screening assays can be rapidly turned around with a single mass spectrometer system, saving critical time in the drug discovery process.

Special Features of the system Multiple autosamplers in one

The system achieves its speed and flexibility with 2 high-speed, high-accuracy robotic arms, each equipped with a syringe and four injection ports. Batches can be submitted to use either one arm or both arms simultaneously. The plumbing can be set up on a per-injection-port basis, allowing up to 8 different gradients and columns to be left on the system. Four onboard valves simplify the plumbing for the system. Testing with multiple chromatographic setups, direct infusion and high-speed trap and elute experiments can be performed in a completely automated fashion. Alternatively, if two different scientists are using the system, they can run independent experiments easily by each using a different arm.

No Reformatting

With a capacity for up to 12 plates on a single deck (96-well or 384-well, deep or shallow are supported), the ADDA system has instant access to every sample, meaning that sampling across plates from a time course study is rapid and efficient no reformatting step necessary.

All-in-One Software, Multiplexing, and Multi-Batch Automation

The ADDA software was developed by Sound Analytics LLC, makers of the industry-standard DiscoveryQuant software for AB SCIEX instruments. It offers excellent instrument control along with the ability to access MSMS conditions from a central database, and interleave various LC modes on the fly. Intuitive visual interfaces simplify sample setup and batch building. Full multiplexing support is available to multiplex gradient runs. The software effortlessly switches batches to different arms and different injection ports, allowing for automated overnight runs of many different batches of different chemistries without pause. The runs can then be analyzed using the DiscoveryQuant Analyze software, making it easy to integrate all peaks and export them to Excel or another software system.

Disposable Deepwell Plates, Racks and Reservoirs

We have a complete custom design process and also a full class 100, 000 clean room ISO 900113485 and CE certified injection molding facility. We can produce custom labware including tips, reservoirs, racks and virtually anything else you might need for your automation needs. Please contact us if you need to create something unique for your process.

To place an order: ORDERING POLICIES

If you would like to request a sample to try out please contact us by the web form, phone, or email: CONTACT US

High quality disposable square well and round well deepwell plates and disposable reservoirs from Apricot Designs feature:

Made with 100% premium Virgin Polypropylene - ideal for solvent resistance, minimal fluid retention and binding, and for long term -80C storage
Certified RNase, DNase, protease and endotoxin free
Autoclavable at 121C, 20 minutes, 20psi
Optional U-bottom well design version suitable for mixing, bacterial culture, and collection of samples
Optional V-bottom well design version to decrease dead volume
Alphabetical labeling and cut angle mark for convenient tracking of samples; labels are molded underneath to make marking easier
Manufactured to ANSISBS specifications for microplate footprint applicable to multi-channel pipettors and automated liquid handlers
Withstand up to 4000xg
Manufactured with new quality molds and QC-tested for flatness, providing a better surface for sealing; heat seals can be applied up to 10 times

Reusable microcentrifuge tube racks from Apricot Designs feature:

Holds 24 x 1.5 microcentrifuge tubes
Microplate footprint rack
Slots to hold caps in open position
Allows tube-to-plate pipetting for multichannel pipettors with 24 channel head
Delrin material
127.76mm(5.030") width x 85.47mm(3.365") depth x 25.40(1.00") height
Order Number: 096-A-28 (quantity 1)