Our Products #5140909

Fairchild model 2400 Motorized Pressure Regulator
4-20mA, 0.5-30 psig, Extended Temperature Range
Part Number
24XFS10940003

Penberthy Model TMW Liquid Level Gage; Flat Glass; Transparent, Slot on Both Sides; Weld Pad Series, C.S. Cover; C.S. or 316L S.S. Chamber, Flat Pad

A large inventory of cable types, controllers and accessories makes it easy to quickly
construct a system that is just right for your application. From a single loop installation to
those with 24 loops or more, Chromalox supplies everything needed to design, build and
operate efficient heat trace systems.

Chromalox has a broad line of heat trace cable to support your application needs. You can rely
on the industrys most comprehensive inventory and FASTShip same day shipping. Moreover,
our cable performance tops anything else on the market. Chromalox cables have the most
stable resistance and insulation integrity you can find, thereby assuring more accurate
temperatures and safer operation.

Chromalox self-regulating heat trace cables have an FEP insulating jacket for increased safety as the cable ages. Compared to ETFE jackets used by some manufacturers, FEP minimizes shrinkage at elevated temperatures. The adjacent photograph illustrates the ETFE jacket shrinkage after high temperature aging. Initial dimensions of both cables were virtually identical. FEP shrinkage was negligible. This is important to prevent shorts to the ground braid in the connections, which would cause tripped breakers and increased maintenance.

WIKA Instrument Type E-10 Explosion Proof Industrial Pressure Transmitter; 1-5VDC 3-wire; +-0.25%; 12"NPT Male; 6 ft. Flying Leads

Snap Acting: At set pressure the valve snaps to full lift. The system pressure will relieve until the pre-set blowdown is achieved. Blowdown is the difference between set pressure and reseat pressure. Nominal blowdown is 7 to 8% so the valve will reseat 7 to 8% below set pressure.
Modulating: At set pressure the valve gradually begins to open as needed in response to the system overpressure. When the system pressure has been relieved the modulating valve will reseat very close to set pressure. This is very different from the snap action valve which abruptly "snaps" open, then closed. Modulating valves produce far less shock on the system and there is consideratbly less wear and tear on the main valve components. Another key reason for using a modulating valve is the economic savings due to minimized product loss because the valve reseats near set pressure, rather than 7 to 8% below set pressure.

PRODUCT FEATURES:

Drop in replacement for Barton and Prime
Over-Range Protection, High over Low and Low over High
Micro adjust pointer
DP Ranges from 0-50" H2O to 0-600" H2O
Tamper Proof, All adjustments require removal of bezel for access.
Snap acting micro switch for alarm (optional)
In house Oxygen Cleaning (optional)
Private labeling (optional)
Black ink on white dial or White ink on back dial
BENEFITS:
Engineered Plastic gauge front and optional stainless steel body bolts provide superior corrosion resistance in over-the-road trailers, outdoor or salt air environments
Dry gauge design with no internal liquid fill
Eliminates costly clean up from liquid fill leaking and fouling the tank and system
No gauge damageaccuracy loss caused by liquid fill expansioncontraction when exposed to temperature shocks in cryogenic applications
Up to a 30 lb. (14 kg) weight savings on liquid Helium and Hydrogen
Allows more products to be transported in mobile trailers
Easier and less labor to panel mount
Adaptable to a wide variety of mounting configurations
Ability to create custom dials for horizontal and vertical tanks
SPECIFICATIONS:

Accuracy: 1% of Full Scale
DP Range: 0-50" H2O to 0-600" H2O
Safe Working Pressure: 500 PSIG (Standard) 1000 PSIG (optional)
Body Material: Brass
Internals: 316 S.S. Convoluted Bellows
Port: Dual Top and Bottom, 14" FNPT connections with optional snubbers
Vilton Standard, other elastomers available
6" Black Dial with White Lettering OR White Dial with Black Lettering
Switch Options
1 Switch
SPDT Outputs
4 Amp @ 30 VDC
3 Amp @ 240 VAC
5 Amp @ 120 VAC
Adjustable from 3% to 100% F.S.
Operating Temperature -20F to +185F
Electrical Enclosures: Weather-proof NEMA 4

Proof Pressure: Two times working pressure at ambient temperature
Static Pressure: 500 PSIG and 1000 PSIG Static Pressure
Temperature Limits: -40F (-40C) to 200F (93C)
Standards: Model 116 Series Gauges either conform to andor are designed to the requirements of the following standards;
ASME B1.20.1
ASME B40.100
NEMA Std. No. 250
UL Std. No. 50
CSA-C22.2 No. 14
SAE J514

Chromalox electric comfort heaters provide efficient, economical heat for commercial and industrial applications. Convection, forced air, and radiant heaters provide safe, clean, fast heat. Their heavy-duty construction affords long, dependable service.

The Trident X2 can now
go anywhere as the
ProtEX-MAX! The same huge,
bright display and features of
the Trident X2 are provided in an
approved ProtEX-MAX explosion
proof enclosure. In addition,
RS-485 serial communications for
Modbus or MeterView software is
standard. All ProtEX-MAX products
also come with SafeTouch
through glass buttons, for easy
programming and operation in
your hazardous area.The Trident is housed in a shallow-depth case that is designed
for easy installation and servicing. The extra large front bezel is
rated Type 4X, IP65. The mounting brackets are locked in place
to make it easy to mount the meter in the panel. Removable
screw terminal connectors make for easy and convenient wiring

Fairchild model T7800 Transducer, NEMA 4X on "TA" and "TD" models, Field Reversible for Direct or Reverse Acting, Internal Electronic Feedback for Precise Control