Post Buy Requirement
AI
United States
Add Review

Other Products / Services

AH-64 CATWALK DOOR RESTRAINT

  • Material Stainless steel and polypropylene
  • ROPE TYPE UV resistant bungee cord
  • BUNGEE LENGTH 96'', +/- 2''
Constructed with stainless steel and polypropylene, these durable restraints will ensure your catwalk doors remain securely open. Even in windy conditions, the AH64-CDR will help prevent premature closure of the catwalk doors and injury of maintenance personnel or damage to equipment.

Stainless steel and polypropylene construction
Rust and UV resistant for years of service in the field
View Complete Details

RADIAL AXIAL BEARING INSPECTION TOOL

  • EQUIPMENT REQUIREMENTS Specifically designed to measure a spherical bearing in a helicopter pitch change link
  • AIRFRAME REQUIREMENT Use with CH-47, UH-60, or AH-64D/E
  • GAUGES Axial and radial
  • ACCURACY 1/1000''
The RABIT is a patented inspection tool that measures spherical bearing wear during quality inspections and overhauls.

On-wing inspection
Save costly flight test time
Accurate (+-.001) inch
Cost effective
Lightweight and nimble
Fits in the hand of the inspector
Measures both axial and radial play
Deployed on-wing or the bench
View Complete Details

DIESEL POWERED FOAMER

  • Fuel Type Diesel
  • Capacity 100 gallons (47.3 liters)
  • POWER TYPE Compressed air
  • CHEMICAL PICK-UP TYPE One product
The M1D-TP Foamer builds on the success of the M1D by increasing the tank size to 100 gallons of pre-mixed solution allowing for double the foam time in between fill ups. The 7HP diesel air sled powers the foam unit and allows the operator to quickly foam down any size aircraft. This unit is ideally suited for deployments where compressed air is not available. The new frame and steering system allow for easy towing.

100 gallon tank for extended foaming
7HP diesel engine with electric start package
4 wheel steering with tow bar
15 inch foam filled tires
Secondary air connection to power air tools
View Complete Details

GALLON FOAM UNIT

  • Capacity 12.5 gallons (47.3 liters)
  • COMPRESSED AIR 40-80 psi (3-5 bar) with 3.5-8 cfm (99.1-227 l/min)
  • LIQUID TEMPERATURE RANGE 40-100ËšF (4.4-37ËšC)
  • CHEMICAL PICKUP TYPE Draws from pre-mixed solution
The 10 gallon soap foamer operates on compressed air and requires only ready-to-use solution to create thick, long-lasting foam.

Foam eliminates the need for high pressure cleaning
Foam reduces the amount of labor needed to clean the aircraft
Foam provides maximum contact time for chemical effectiveness
Foam offers savings in chemical and water usage
View Complete Details

GALLON SOAP FOAMER

  • COMPRESSED AIR 40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
  • LIQUID TEMPERATURE RANGE 40-100ËšF (4.4-37ËšC)
  • OUTPUT VOLUME Up to 75 gallons (283.91 liters) of foam per minute
  • WHEEL TYPE Two turf tread wheels, two 3 inch casters with lock
The 25 gallon soap foamer operates on compressed air and requires only ready-to-use solution to create thick, long-lasting foam.

Foam eliminates the need for high pressure cleaning
Foam reduces the amount of labor needed to clean the aircraft
Foam provides maximum contact time for chemical effectiveness
Foam offers savings in chemical and water usage
Turf tread wheels for increased durability
View Complete Details

ORANGE BLADE TIE DOWN SYSTEM

  • TIE DOWN Low-density polyethylene
  • WEBBING Nylon
  • HARDWARE Aluminum
  • ROPE LENGTH 26 ft. (8 m)
Constructed with high visibility, UV resistant polyethylene (LLDPE), these tie downs can withstand the world's harshest environments without scratching the main rotor blade of your AH-64D Apache. Nothing will secure your main rotor blades better, or is tougher in the field.

Designed for the AH-64D airframe
Highly visible
Durable polyethylene construction
UV resistant for years of service in the field
Secured webbing for fast and firm deployment
Smooth edges for scratch free use
Easily fits into storage compartments
OBTD1 Includes:
1 Orange Blade Tie Down (BTD)
1 Red 26 ft. (8 m) Reflective Rope
OBTD4 Includes:
4 Orange Blade Tie Downs (BTD)
5 Red 26 ft. (8 m) Reflective Rope
View Complete Details

AH-64E MAIN ROTOR BLADE TIE DOWN

  • TIE DOWN Reinforced nylon
  • WEBBING Stainless steel and aluminum
  • ROPE TYPE Nylon
  • ROPE LENGTH 26 ft (8 m)
  • SAFE WORKING LOAD (SWL) 114 lbs
Built with heavy-duty, UV resistant reinforced nylon, these tie downs can withstand the worlds harshest environments without scratching the composite main rotor blade. Utilizing a fast-slip prusik hitch and integrated rope channels, you can now deploy and stow your tie downs in less time than ever before. Nothing will secure your main rotor blades better, or is tougher in the field.

Designed for the AH-64E airframe
Reinforced nylon construction
UV resistant for years of service in the field
Fast-slip prusik hitch and carabiner
Secured webbing for fast and firm deployment
Remove Before Flight ribbon
AH64-CMRBTD Includes:
1 Blade Tie Down (BTD)
1 Black 26 ft (8 m) rope
AH64-CMRBTD2 Includes:
1 Blade Tie Dow (BTD)
2 Black 26 ft (8 m) ropes
View Complete Details

PITCH LINK BEARING CUTTERS

  • Material M42 steel
  • PLBC-KIT-AH64 Pitch Link Bearing Cutters
The Pitch Link Bearing Cutters allow you to cut the Main Rotor PC link bearing and the Tail Rotor PC link bearing on an AH-64 helicopter. The kitincludes a back-up cutter to enable continued function in the field even when you send your cutter back for free sharpening that is include din your purchase. The cutters are M42 steel to further enhance the service life of this kit.

Includes
One 1.562'' Cutter.750'' PinDrill Holder
One 1.562'' Cutter.500'' PinDrill holder
One 1.562'' Cutter Replacement
Small Pelican Case with instructions
View Complete Details

UH-60 BLADE TIE DOWN ROPE

  • Material Nylon
  • ROPE TYPE Reflective rope
  • ROPE LENGTH 26 ft. (8 m)
Made from UV resistant nylon, these tie down ropes can withstand the world's harshest environments while firmly securing the Main Roter Blades of your UH-60 Blackhawk. Utilizing a fast-slip prusik hitch and carabiner, you can now deploy and stoe your tie downs in less time than before. Nothing will secure your main rotor blades better, or is tougher in the field.

Durable nylon construction
UV resistant for years of service in the field
Fast-slip prusik hitch and carabiner
View Complete Details

BATTERY POWERED MOBILE LIGHT

  • ELECTRICAL REQUIREMENTS 120 VAC at 60 Hz, 2 amps (GFCI protected outlet) for battery charger only
  • OPERATING VOLTAGE 12 VDCa fda
  • BATTERY CHARGE TIME (FROM FULL DEPLETION) 12 hours
  • LIGHT MAST HEIGHT RANGE 5-15.5 ft. (1.5-4.7 m)
The Armick 90W Battery Powered Mobile Light Station provides a quiet, convenient, and ecologically responsible alternative to diesel fueled generator light sets. Built with versatility in mind, the light station features a telescoping mast and a 360 articulating light array. The system's next-generation LEDs emit up to 9, 9000 lumens. Powered by a rechargeable battery, the system offers hours of run time. In a self-contained case with the mast mounted on the exterior, the unit is easily trasportable while deployed.

Ideal for emergency warehouse lighting, temporary indooroutdoor task lighting, nighttime event lighting, or etc.
Battery operated with 12 volts, 110-amp hour AGM battery
Battery charge indicator and protection circuit
Single person setupbreakdown time of 2.5 minutes
Red perimeter lights and white accessory lights for safety and easy of setup
Up to 10 hours of run time
9, 900 lumes of light
60 light pattern
Deisnged for use on the flight line
Light mast height ranges from 5-15.5 ft. (1.5-4.7 m)
Six LED light heads can be independently rotated
360 articulating light array
All components attach to wheeled battery box for easy, 1-person transport
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Armick, Inc.)
  • Grand Rapids, MI 49503 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/armick-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0008457624{main}( ).../index.php:0
20.02922027920include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.04122750400include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.05113686088header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice