Texas, United States
We are leaders in the market for providing best range of Molded Lightweight Armor, Mobile Ballistic Shield, Body Armor Plates, Lightweight Ballistic Helmet and Run Flat Tires System
Custom molded shapes to complicated shapes Ultra-high molecule unidirectional (UHMPE) Easy and simple installation Lightweight ballistic PanelsUnigard™ Lightweight Ballistic Interior is made of ultra-high molecular unidirectional polyethylene (UHMPE) fiber. High-pressure pressing and unidirectional fabrication results in a lightweight and easy to install panels. Panels are especially useful for the doors, roof, and floor of armored vehicles. Unigard™ Lightweight Ballistic Panels can be molded under high temperature and high pressure, to precisely take the complicated shapes of engine compartments and other parts
Bogard™ Ballistic Shield addresses the need for a robust, stable, deploy-able, and highly maneuverable shield platform. Bogard™ Ballistic Shield is a Level III, Level III+, Level III++, and Level IV armored mobile barrier with trolley is a new development from Armor USA which addresses the need for a robust, stable, and highly maneuverable shield platform while enabling rapid shield dismounting from the platform for handheld operations. The two rear wheels have brakes and all four solid rubber wheels have independent steering. The shield is securely mounted onto the Quad Trolley by means of parallel vertical slotted bars and can be mounted and dismounted within seconds without the need for any tools. Bogard™ Mobile Ballistic Shield is constructed from either 100% UHMW PE or ceramic tiles and is rated to NIJ Level III+ and Level IV. This unofficial level covers the traditional NIJ Level III performance for 6 strikes of 7.62 x 51mm NATO Ball (US designation M80 Ball) and also the widely recognized threat from AK47 MSC 7.62 x 39 mm round, and 7.62 mm AP.
Ceragard™ ceramic plates – Great ballistic protection at an affordable price. We offer a variety of thicknesses and compositions. Unigard™ lightweight polyethylene (HPPE) plates. – Low profile and ultra lightweight protection. Ceragard™ ceramic body armor plates are an integration of hard ceramic hexagons, AL2O3 or SIC, with ultra-high molecular weight polyethylene (HPPE) or aramid backing, with optimized composite construction to produce rugged multi-hit armor, reaching protection levels NIJ Level III plus and Level IV at the lowest cost. Unigard™ lightweight polyethylene (HPPE) body armor plates are the ultimate solution to provide protection level NIJ Level III at an ultra lightweight. The panels are waterproof and are tested to work properly between ±40°C.Standard Armor Plate size is 250 x 300mm, in E-type or T-type shape.
The Heagard™ Ballistic Helmet is designed from high-tenacity ballistic aramid fiber to protect against fragments and ballistic threats. The Heagard™ Ballistic Helmet is designed to protect against fragments and ballistic threats. Manufactured from high-tenacity aramid fiber, and is designed to protect against fragments and ballistic threats at the lightest weight and ultimate comfort and includes our ergonomically designed harness. The Heagard™ range comprises of three styles PASGT, ACH (MICH) and Special Forces. All have ballistic performance to NIJ Level IIIA. Fragmentation ranges from V50 of 500-700 ms, with a low blunt trauma effect.
Features: â�¢ Entire facial ballistic protection from helmet rim to below chin â�¢ Face shield with three positions: 0, 45, and 90Ë� â�¢ Multiple hit resistant â�¢ Fragmentation protection â�¢ Soften blunt force impacts â�¢ Laminated with PMMA, polycarbonate, and TPU â�¢ High light transmission â�¢ Minimal distortion â�¢ Easily removable â�¢ Retrofits onto PASGT or COMBAT (ACH) style helmets Additional options: Subzero operation temperature. For detailed specifications, see below. Vigardâ�¢ Visors are supplied to major ballistic helmet manufacturers worldwide for military, para-military, law enforcement, disposal, and EOD applications. Vigardâ�¢ visors are designed to offer entire facial protection from the rim of the helmet to below the chin against multiple hits of ballistic threats, as well as fragmentation and blunt impact. Our ballistic face shields can be retrofitted onto PASGT or COMBAT (ACH) style helmets with our unique Visor Fastening System (VFS). It can be securely attached or detached to most ballistic helmets with an adjustable rear lock. The visor can be locked into 3 positions including fully elevated, 45-degrees, and deployed. The face shield is laminated with PMMA (methyl methacrylate) and polycarbonate with a proprietary TPU (thermoplastic polyurethane) inter-layer. Vigardâ�¢ visors have high light transmission and minimal distortion with lower width and thickness compared to similar ballistic face shields. Our latest addition to the Vigardâ�¢ series is the Vigardâ�¢-Arctic, tested to NIJ Level IIA at -54Â°C.
Protective Tire Assembly (PTA) is an integration of the following parts: Runflat Insert system (RIS) – lightweight polymer inserts allow tires to function after being deflated. Tire Wall Shielding (TWS) – composite of rubber and honeycomb shields that protect tire wall. Central Tire Inflation System (CTIS) – Allows crew to control tire air pressure on demand.Rungard™ Runflat System allows any vehicle to continue to travel even after its tires have been compromised. The system consists of the following: Rungard ™ Runflat Insert System (RIS) is made with lightweight polymer materials and engineered with a unique performance to prevent breakage or shattering under ballistic attack or road hazards. It is strong enough to support the full load of fully armored military combat vehicles. It can run flat tires at 50 kmhr. for a range of 100 km on road, or 50 km off-road. Rungard ™ – Tire Wall Shielding (TWS) system is a composite of engineered rubber and lightweight honeycomb. TWS is developed to protect tire wall, the most vulnerable part of the tire. It is also flame-resistant and can conceal infrared caused by braking heat. Unshielded infrared can be easily visible to night vision system. Rungard ™ – Central Tire Inflation System (CTIS ) is a system which allow the crew to control the pressure in the tire on demand. This allows the tires to fit the different conditions with different pressure, and keep the tire under pressured when tire is damaged.
Standalone bracket with visor arms. This replacement bracket snugly latches on any helmet and allows to mounting a visor. Made with lightweight high-strength nylon. Vigard™ replacement bracket snugly latches on military helmets. This standalone bracket is the same mount used in our Vigard ballistic face shield system. It’s made with lightweight high strength nylon. The bracket has a total of three positions 0°, 45°, and 90°, which easily adjusts to fit a wide variety of helmets. This also provides the option to add custom “Glass” to any helmet.
Railband™ is a patent pending retrofit bracket designed for mounting helmet accessories. Features: → Railband ™ has the following unique functions; → Bolt-free: Innovative design completely removes the necessity to bolt the rail and shroud onto helmet. This way there is NO protection weak point caused by bolt holes. → Retrofit: It can be attached and detached from helmet instantly, allowing the equipment to be pre-mounted on the bracket. → One-fit-all: Sturdy adjustable strap. Railband™ can be mounted to any size of helmet, from S to XXL. → Durable: It is made of high strength engineered nylon, which is extremely strong and durable. → Helmet Rails: Same Functions as normal Helmet Rails. *Black in stock for individual sales. Other options available in large quantities. Please inquire below.Railband™ Railband™ is a patent pending retrofit bracket (helmet rails) designed for mounting helmet accessories. The system consists of a set of left, right, and a shroud embedded into the bracket band. The rails include mounting hardware and adapters to quickly attach or detach a variety of accessories, such as flashlights, cameras, visors, communication headsets, strobes, mandibles, battery packs, etc. The shroud is designed for easy mounting of night vision equipment. *Black in stock for individual sales.
Riogard™ tactical riot armor is the ultimate high-threat level riot control suit. It provides protection for the whole body against mechanical attack such as batons, stones, and sharp weapons. All this without sacrificing fit or comfort. Riogard™ tactical riot armor is the ultimate high-threat level riot control suit. It provides protection for the whole body against mechanical attack such as batons, stones, and sharp weapons. All this without sacrificing fit or comfort.