Post Your Requirement Menu

Welcome User

Other Products / Services

Our offered Product range includes Suction Strainer, ASI Submersible Pump Protector, Large Monitoring Well Manhole, All Purpose Round Manhole 100C8X75 and Locking Plug.

Suction Strainer

  • Flow Rate 40 gpm
  • Size 2 x 6
  • Length 18 in
  • Material PVC
  • Female Connect (NPT) 2 in

Plastic Suction Strainers are designed to be used on the suction side of non-submersible pumps. These units are used to remove or retrieve water from lakes, streams, ponds, bays, tanks, manholes, sumps, tunnels, mines, construction excavations, etc. The large, double- wall intake area offers 3 advantages: high flow rates; reduced entrance velocity; and less frequent need for service. For additional volume or reduced entrance velocity, 2 or more 40G's can be coupled together with a 2" pipe thread nipple. Also, filling the area between the two screens with pea gravel or other suitable filler material keeps debris and marine life out of the pumping system. Constructed of heavy-duty PVC, plastic, and stainless steel for years of trouble-free service.

View Complete Details

ASI Submersible Pump Protector

  • Material PVC
  • Length 5 ft
  • Schedule SCH 40
  • Slot 010
  • Diameter 4 in

These units are used to protect submersible pumps in wells, lakes, ponds, tanks, excavations and other locations where sand and other foreign matter may clog pump impellers. Each unit consists of a 4" Sch. 40 slotted PVC well screen with a slip plug glued in one end and a high impact ABS well seal in the opposite end. The standard well seal is a PS4X1SS with stainless steel nuts, bolts and washers. This unit accommodates a 1" drop pipe and has a 12" vent tapping and a 34" cable hole. Other well seals available

View Complete Details

Large Monitoring Well Manhole

  • Series 106MW
  • Size 18 x 12 in
  • Width 19 1/8 in
  • Height 12 3/4 in
  • Weight 48.0 lbs

The Large Monitoring Well Manhole allows access to monitoringobservation wells. The manhole is large enough to accommodate most electronic probes, conduit and junction boxes. The manhole features a steel ring, diamond plate steel cover with a monitoring well triangle designation in the center, galvanized steel skirt, 38" flush mount stainless steel bolts for limited access and carries the H-20 load rating. The Model 106MW is a limited access monitoring well manhole and the Model 107MW is a rain tight limited access monitoring well manhole which includes a Buna-N gasket.

View Complete Details

All Purpose Round Manhole 100C8X75

  • Series 100C
  • Size 8 x 7 1/2 in
  • Height 6 3/4 in
  • Width 9 1/4 in
  • Weight 11.0 lbs

The All Purpose Round Manhole features a cast iron ring, cast iron cover with finger grip holes steel skirt and carries the H-20 load rating.

View Complete Details

Locking Plug

  • Series 678XA
  • Size 2 in
  • Bailer Ring No
  • Weight 0.50 lbs

The 678XA has a bright orange plastic housing, brass wing-bolt, buna-N rim disc and stainless steel lock lever. This one-piece unit is made to plug, seal and lock-in place on a 2", 4" or 6" PVC (Sch 40) or Stainless Steel (Sch 5) pipe without adaptor or special preparation to the pipe. "TEST WELL" warning is molded to the cap. (Note: 4" plug requires extra gasket to fit Sch 5 SS pipe)

View Complete Details

356TW Monitoring Well Cap

  • Material Brass
  • Series 356TW
  • Diameter 2 in
  • Weight 3.75 lbs

The 356TW consists of iron body and gasketed brass plug. The plug screws into the body and tightens down flush to the rim and driveway surface. 2" NPT thread for connection to well. "TEST WELL-NO FILL" warning is cast onto plug. Wrench is available (but not required).

View Complete Details

1711, Disposable Groundwater Filter

  • Size 1 micron

The SingleSample® Groundwater Filter Cartridge features a stepped hose adapter on the inlet side for in line filtering of pumped samples

View Complete Details

knitted filter fabric

  • Roll Length 100 ft
  • Break Down to Diameter 1 in
  • Fabric Type Fabric Type

Seamless, knitted filter fabric. Filtration opening size for plush fabric is 250 microns. Filtration opening size for regular knit fabric is 600 microns. Developed specifically for groundwater monitoring and remediation. Vertical and horizontal applications. Open pit and tank installations. Helps prevent well failures. Highly resistant to most chemicals including strong and weak acids and alkalines, organic chemicals, and salt solutions. Widely recommended by environmental professionals. Unequaled durability when compared to non-woven materials. Allows high rate of water or chemical flow while filtering out fine particles.

View Complete Details

Wash Down Valves PVC

  • Material PVC
  • Nominal Pipe Size 3/4 in

PVC wash-down valves are designed to position well screens in sandy soils and to thin drilling fluids. A ball valve opens under pressure from a water stream and rises into a closed position when the water is turned off. The internal female pipe thread allows the water pipe to bypass the screen for jetting. The outer diameter may be flush thread or slip. Outside diameters are the same as the equivalent nominal pipe size.

View Complete Details

Detergents

  • Packaging 4 lb. Box
  • Size 100.0 lbs 300 lbs

Dependable cleaning power for lab, medical and industrial use. Specifications: Alconox® detergent in ultrasonic washers. Mild Liquinox® detergent is phosphate-free. Alcojet® powdered machine detergent is for all washing machines and mechanical washers. Citranox® liquid detergent is formulated to clean plastic and glass labware. Compliance: Alconox, Liqui-Nox, Alcojet and Citranox are USDA authorized for federally inspected meatpoultry plants.

View Complete Details

356TW Monitoring Well Adapter

The 356TW consists of iron body and gasketed brass plug. The plug screws into the body and tightens down flush to the rim and driveway surface. 2" NPT thread for connection to well. "TEST WELL-NO FILL" warning is cast onto plug. Wrench is available (but not required).

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Milton, DE 19968 map, United States