ATO Inc Chicago

• MOQ 1 Piece(s)
• Capacity10 hp

Ato 10 hp vfd converts power to a usable form. In the case of an induction motor, the electrical power supplied to it is converted to mechanical power through the rotation of the motor's rotor and the torque that it produces through motor slip. On the other hand, 10 hp vfd will convert its incoming power, a fixed voltage and frequency, to a variable voltage and frequency. This same concept is also the basis to vary the speed of the motor without the need of adjustable pulleys or gearing changes. The most significant benefit to using an 10hp vfd is energy saving. By matching system capacity to the actual load throughout the entire year, major savings in system motor energy use are achieved. In comparison to a mains-powered motor with direct starting, ato vfds can reduce the starting current by up to 80% without affecting the starting torque. By enabling lower starting currents, the energy grid is placed under less stress when motors are powered up, reducing the impact on other local grid energy consumers. The resulting lower energy frequency fluctuations also mean that failures of electrical equipment can be reduced.

• MOQ 1 Piece(s)
• Brand NameATO
• UsageLoad Distribution And Remote Control, Telemetry And Patrol Of Power Network
• TheoryHall Effect
• ColorBlue
• output4-20mA, 0-20mA, 1-5V, 0-5V (customizable)

hall effect current sensor adopts linear photoelectric isolation or modulation and demodulation principle, best cost performance, fast response, high accuracy, good stability, small size, light weight, input current terminal connection, din rail installation, widely used for ac current measurement of various occasions.     follow our facebook twitter feed for more information.

• MOQ 1 Bushel(s)
• TypeMulti Gas Detector
• CertificationCE Certified, ISI Certified
• ConditionNew
• ApplicationGas Detecting
• Display TypeDigital
• Power SourceBattery
• Warranty3Year
• Gas TypeNatural Gas
• Brand NameATO.com

multi gas detectors and monitors are used for the detection of flammable gases, oxygen depletion and an extensive range of toxic gases meeting the safety monitoring requirements of a broad range of different industries. Designed for situations where a variety of gases need monitoring at the same time the detectors are avaiable preset to meet your individual requirements. Available as either fixed or fully portable gas detectors they are commonly used for the following gases, hydrogen sulphide, carbon monoxide, oxygen and combustibles. All gas detectors require regular callibration to ensure accuracy of the gas readings. ato gas detector is a device which detects the presence of various gases within an area, usually as part of a safety system. This type of equipment is used to detect a gas leak and interface with a control system so a process can be automatically shut down. A gas detector can also sound an alarm to operators in the area where the leak is occurring, giving them the opportunity to leave the area. This type of device is important because there are many gases that can be harmful to organic life, such as humans or animals. gas detectors can be used to detect combustible, flammable and toxic gases, and oxygen depletion. Gas detectors are usually battery operated. They transmit warnings via a series of audible and visible signals such as alarms and flashing lights, when dangerous levels of gas vapors are detected, but there are also new systems for remote monitoring. As detectors measure a gas concentration, the sensor responds to a calibration gas, which serves as the reference point or scale. As a sensor’s detection exceeds a preset alarm level, the alarm or signal will be activated. As units, gas detectors are produced as portable or stationary devices.