Post Buy Requirement
BI
United States
Add Review

Our Products

  1. Packaging Services 4 Products available
  2. Printer Consumables 3 Products available
  3. Labels 5 Products available
  4. Trucks 3 Products available
  5. Drums 19 Products available
  6. Pet Bottles 4 Products available
  7. Brass Water Taps 3 Products available
  8. Plastic Bottles & Containers 6 Products available
  9. Pumps, Pumping Machines & Parts 3 Products available
  10. Others 164 Products available

Other Products / Services

Gallon Stackable IBC Tote

  • Series 70 Gallon Stackable IBC Tote
This 70 gallon IBC tote is for indoor and outdoor use, stationary or transportable applications, for non-hazardous materials with a specific gravity of 1.5 or less. With translucent sidewalls and gallon calibration gauging contents is so easy!
The intermediate bulk container has a 7 inch diameter vented top fill opening and is supplied with three 2 inch threaded fittings located on the top side, side bottom and top corner allowing you to fill and dispense conveniently and easy.
Four lift ears are provided for lifting, or use the optional 4 way forklift (SKU ST70120-SK) accessible skid for handling. Optional leg kits (SKU ST70120-LG) and drip pans (SKU ST70120-DT) are also available.
UV-stabilized HDPE
For non-hazardous products
Tote stacks 3 high
FDA Compliant
Pallet not included
NOT DOT Approved. Call your BASCO Customer Service Expert at 800-776-3786 for expert help in selecting the correct unit and accessories for your application.
Special fittings available for additional cost. Skid sold separately.
View Complete Details

Stackable IBC Totes Steel Skid

Get this steel skid that is used specifically with the 70 and 120 gallon stackable IBC totes that allows for stacking, storing and making tanks moveable with a fork or pallet trucks. This skid is constructed of 10 gauge steel with a black powder coat finish.
Add the optional skid leg kits to elevate the skid off the floor 24 inches (SKU ST70120-LG) for dispensing when using the plumbing kit.
The 70 and 120 gallon storage tanks are sold separately
View Complete Details

Stackable IBC Tote Leg Kit

This leg kit is used to elevate stackable storage tanks 24 inches off the floor to make dispensing easy. This steel 24 inch leg kit fastens to the corner of the steel skid (SKU ST70120-SK), with four 38 inch stainless steel bolts. Installed with X bracing, provided on all sides for tote stability, holds up to 900 lb.
Components are black powder coated mild steel, all hardware is stainless steel.
Leg kit installation requires a level surface for stability, a hole is provided in the bottom of each leg to allow the stand to be anchored to a suitable hard surface.
Tote and skid sold separately.
View Complete Details

Drip Tray Kit Stackable Totes

The polyethylene drip tray is used to catch drips or small spills when dispensing. This adjustable tray attaches to the leg kit (SKU ST70120-LG) on 70 or 120 gallon stackable totes.
The top of the tray has a flat screen that allows drips or spills into the drip tray.
View Complete Details

Two Stackable Totes Plumbing Kit

The plumbing kit is used with two, 70 gallon or 120 gallon stackable totes to dispense product from totes to smaller containers. Always check compatibility when using hoses or faucets.
The plumbing kit includes chemical PVC tubing, nipples, clamps, hose barb, couplers and ball valves.
View Complete Details

Three Stackable Totes Plumbing Kit

The plumbing kit is used to attach to three, 70 gallon or 120 gallon stackable totes. Use to dispense products from tank to smaller container. Always check compatibility when using hoses or faucets.
The plumbing kit includes chemical PVC tubing, nipples, clamps, hose barb, couplers and ball valves.
View Complete Details

Gallon Tamper Evident BSP Fill Liner

  • Series 275 Gallon Tamper Evident BSP Fill Liner For IBC Packaging System
Use this 275 gallon tamper evident BSP fill liner for your IBCs and Totes. This liner has a 2 buttress dispense with membrane and cutter that is perfect for dispensing liquids. This liner is manufactured to form fit to the internal shape of your tote. Perforated flaps are located on the top of the liner and contain holes specifically designed to hold the liner in place during filling. Once the liner has been filled, the flaps can be detached.
Material: LDPE
Max. Fill Temperature: 190F
FDA Compliant material
Ideal for tote returnable type containers and one-way disposable corrugated containers
View Complete Details

Containment Pan

  • Series Containment Pan For IFH Oil Storage and Dispensing System, 4 Wide Outboard Model
Containment pans help you comply with EPA regulation 40 CFR 264.175 when using with the four container wide IFH Oil Storage and Dispensing systems with outboard console (SKU COS1502).
View Complete Details

Shipper Carton

Shipper Carton for One - 1 Gallon F-Style Plastic Bottle
This corrugated Kraft shipper carton has a 200#ECT-32 (Edge Crush Test) rating. The shipper carton is designed for shipping non-hazardous liquids in a one gallon F-style plastic bottle. Black Up Arrows are printed on two sides. Maximum weight capacity is 65 lbs.
Bottle (SKU HF128N-38) sold separately.
200# ECT-32 corrugated
Holds 1 - 1 gallon F-Style plastic bottle
Maximum weight capacity: 65 lb
View Complete Details

Shipper Carton Holds

Shipper Carton Holds 1 - 6 gallon pail
These cartons are manufactured to have a higher gross weight limit than standard double wall cartons with a maximum capacity of 100 lb. Use this shipping carton to keep 6 gallon plastic pails sturdy when shipping - additional support during transit is helped by using two triangular inserts (SKU UPS121214-TI).
Save additional handling charges from UPS or FedEx when shipping 6 gallon steel or plastic pails when you don't use a carton
Dimensions: 13 inches x 13 inches x 19 inches
Note: This carton is certified to have an Edge Crush Test (ECT) rating of 48 pounds per inch and a gross weight limit of 100 lb (shippers will not accept packages that exceed the weight limits stamped on the box). As with any carton, it will not enhance or improve the integrity or performance of the pail being shipped within the carton. Pails sold separately. Custom printing is available.
View Complete Details

Thermal Wrap Insulation With Shipping Box

  • series Thermal Wrap Insulation with Shipping Box – For 3.5 – 5 Gallon Pails
Use this shipping box with thermal wrap insulation to keep the contents of your steel or plastic pail insulated and avoid product from freezing or melting. This shipping combination is uniquely designed with the thermal wrap placed in the bottom of the shipping carton and wrapping up the four sides of the carton to keep your product secure and extending the coldwarm shipping time. The thermal wrap insulation is composed of loft filler material and poly-lined composite. This shipping combination creates a passive temperature protection that you need for your product and it is a cost effective and reliable solution compared to the time spent waiting for your product to thaw or bring back to the right temperature.
Shipping Contents Include:
Carton 14 x 14 x 18 with two labels; One label on one side of the carton consists of This Side Up arrow and the other label on another side of the carton consists of Freeze Protection
Thermal Wrap Insulation
The heating and cooling temperatures depend on the specific product temperatures and environmental conditions.
View Complete Details

Non-Hazardous Shipper Carton

Non-Hazardous Shipper Carton - Ships Two - 1 Gallon F-Style Metal Cans
Designed for shipping non-hazardous liquids these single-wall corrugated cartons are specially designed to pack two, 1 gallon f-style metal cans. Up arrows are printed on two sides.
Extra strong 275# burst strength
44 ECT (Edge Crush Test)
View Complete Details

Hedpak 5 Gallon Container

The 5 gallon bottle is a semi-rigid, high density polyethylene, with molded top handle and bottom finger grips for easy lifting and pouring. The Hedpack is designed to fit inside a heavy duty 350 lb double wall corrugated outer shipping carton, SKU 045-4251, sold separately. Intended for non-hazardous products the Hedpak is not UN-Rated.
The large 70 mm screw cap accommodates fast filling and draining. An in-line spout allows complete draining with a 34 inch faucet, SKUs 401C, 435, 420, sold separately. A special venting cap in the handle allows smooth product flow while dispensing and prevents "chugging".
Meets FDA Requirements for water storage.
View Complete Details

Gallon Hedpak Carton

This 5 gallon Hedpak carton is a specially designed outer shipping carton for the 5 gallon Hedpak bottles (SKUs 049-4358 or 049-4309). The carton is 350 lb DW Kraft corrugated, not UN-Rated.
View Complete Details

BASCO Ergo-Pak

The Ergo Pak Overpack is for shipping UN regulated materials. The cartons are manufactured to have a higher gross weight limit than standard double wall cartons.
The box is specially designed for 5 gallon steel or plastic pails (sold separately). and uses 2 corrugated inserts (SKU UPS121214-TI) to hold the pail tightly in place. Ergonomically positioned hand holes are located on the sides for easy lifting and handling.
Custom printing is available.
Eliminate UPS and fedEx "Additional Handling Charges"
Ergonomically positioned hand holes for easy lifting
Ship UN-Rated material in UN Rated Containers
Note: This carton is certified to have an Edge Crush Test (ECT) rating of 48 pounds per inch and a gross weight limit of 100 lb (shippers will not accept packages that exceed the weight limits stamped on the box). As with any carton, it will not enhance or improve the integrity or performance of the pail being shipped within the carton.
View Complete Details

Triangular Insert

These triangular inserts are used to hold a pail tightly in place within a pail shipping carton during transit. This insert is specially designed for BASCO's Ergo-Pak shipping boxes (SKU UPS5GBX and HMTUPS5), these triangular inserts can also be used with the 6 gallon shipping carton (SKU UPS131319).
Triangular Insert for shipper box
Use to secure a pail during transit
View Complete Details

Quart Cubitainer Carton

The 1 quart Cubitainer carton is an outer carton for the 1 quart Cubitainer bottle (SKU 089-0745-C). This cubitainer carton is 200 lb single wall white corrugated.
View Complete Details

Gallon Cubitainer Carton

The 1 Gallon Cubitainer Carton is an outer carton for the 1 gallon Cubitainer bottle (SKU 089-0722-C). This cubitainer carton is 200 lb single wall white corrugated.
This carton has a circular pre-cut opening to access the Cubitainer bottles opening for dispensing and filling. On one side is a pre-cut handle opening for easy lifting or carrying.
View Complete Details

Polypropylene Handle For Cubitainer Carton

Use this polypropylene handle on Cubitainer cartons for easy carrying and convenience when moving cubitainer cartons. This handle quickly installs to any size cubitainer and improves the handling process.
View Complete Details

Gallon Cubitainer Combination Packaging

Assembled Cubitainer is factory assembled and ready for filling. It includes the 1 gallon Cubitainer bottle with 38 mm white polypropylene cap and polypropylene foam liner in the 200 lb Single Wall Cubitainer Carton with carton dust cap.
Cubitainer Combination Packaging meets UN specifications.
Meets FDA Requirements
Low density molded polyethylene
Assembled 1 gallon bottle and 200 lb single wall carton
6 78" L x 6 78" W x 6 78" H
UN Rating: 4GY6S
View Complete Details

HAZMAT Packaging

This 4G packaging kit is designed specifically for the transportation of hazardous materials. Kit contains one carton and foam which can be used to ship one, 1 gallon round plastic bottle (sold separately, order SKU: HR128N-38). The 4G carton with foam is UN Certified packaging 4GY19.8S and meets UPS requirements for ground shipments.
To ship by air you MUST use poly bag and absorbents, contact a BASCO Customer Service Expert at 800.776.3786 for details.
Note: Though some 4G packaging includes an inner container, such as a plastic bottle, this kit does not include the bottle. However, bottles are sold separately.
What is 4G Packaging? The HAZMAT 4G designation is a dangerous goods packaging code used to alert shipping personnel that placed inside the outer cardboard container there is inner packaging which contains dangerous goods. The outer packaging eases the handling of smaller containers placed inside the outer carton. Therefore, a cardboard carton with a UN 4G designation is not just a box, it is a package of which the outer carton is just one component the 4G packaging is a combination consisting of both the outer packaging and inner packaging, including proper inserts, as required.
View Complete Details

HAZMAT Packaging Holds

This 4G Hazmat packaging system incudes a carton and foam used to ship four, 1 gallon round plastic bottles (SKU HR128N-38), for transportation of hazardous materials. The 4G carton with foam is UN Certified packaging 4GY19.8S and meets UPS requirements for ground shipments.
Includes Hazmat carton and foam
UN Rating: 4GY19.8S
1 gallon plastic bottles sold separately
To ship air you MUST use poly bag and absorbents, contact a BASCO Customer Service Expert at 800.776.3786 for details.
Bottles sold separately. Contact your BASCO Customer Service expert with questions or to order.
View Complete Details

HAZMAT UN 4G Packaging

Pre-assembled, UN HAZMAT 4G Packaging for shipping hazardous materials includes:
One HAZMAT UN rated 4G shipping carton
One 1 gallon paint can with lid and locking ring, and foam insert
HAZMAT Packaging is certified to meet UN 4GX32.6S
Meets UPS requirements for sea and ground shipment
To ship by air you MUST use poly bag and absorbents
Contact a BASCO Customer Service Expert for details 800.776.3786
Note: Hazmat packaging is often sold without the can, locking ring, and foam insert. This selection includes the can, the locking ring and foam insert. If you are comparing prices on this item, be sure you are comparing products with the same features and components.
View Complete Details

HAZMAT UN Packaging

HAZMAT 4G packaging:
One UN rated Hazmat 4G shipping carton
Foam insert and locking ring to securely ship a one gallon paint can (can sold separately)
UN Certified Packaging meets UN 4GX32.5S rating
Meets UPS requirements for sea and ground shipments
To ship by air you must use poly bag and absorbents, sold separately.
Questions? Get it right the first time - contact a BASCO Customer Service Expert at 800.776.3786 for details.
Paint can not included, but sold separately.
Note: The HAZMAT 4G designation is a dangerous goods packaging code used to alert shipping personnel that placed inside the outer cardboard container there is inner packaging which contains dangerous goods. The outer packaging eases the handling of smaller containers placed inside the outer carton. Therefore, a cardboard carton with a UN 4G designation is not just a box, it is a package of which the outer carton is just one component the 4G packaging is a combination consisting of both the outer packaging and inner packaging, including proper inserts, as required.
View Complete Details

Hazmat Shipping Box Holds

This simple to use box design eliminates the need for top and bottom pads. There's no parts to lose, stores flat and assembles in seconds.
Contains carton with attached dividers
Creates top and bottom pads when assembled
Certified to meet UNDOT and UPS requirements
For ground shipments only
Paint cans and rings sold separately
View Complete Details

Hazmat

  • Width 8 1/2"
  • Height 9 5/16"
  • series HAZMAT 4G Pkg With Two - 1 Gallon Cans
HAZMAT 4G packaging with two 1 Gallon Paint Cans is designed, tested and certified to transport hazardous materials via sea and ground transportation. All components of the combination package must be used in order to comply with UN 4GY28.5S rating and UPS requirements.
Pre-assembled HAZMAT carton includes 2 x 1-Gallon plastic paint cans with lids and Normlock locking rings, and foam insert
For sea and ground shipments only
UN Rating: 4GY28.5S
View Complete Details

HAZMAT Shipper Box Holds

  • Width 6 7/8"
  • Height 7 5/8"
This HAZMAT 4G carton comes with Armlock locking rings for two, 1 gallon paint cans. Certified to meet UN 4GY27.9S rating, and UPS requirements for ground shipments only.
Paint cans are not included but are sold separately.
View Complete Details

HAZMAT UN Packaging

  • Length 17"
  • Width 17"
  • Height 9 5/16"
Pre-assembled, HAZMAT UN rated 4G packaging includes:
One Hazmat 4G carton for shipping
Four - 1 gallon paint cans, lids, locking rings and foam insert
This HAZMAT packaging is UN rated 4GX32.6S
Certified to meet UN and UPS requirements for sea and ground shipments
To ship air you MUST use poly bag and absorbents, sold separately.
Need help? Contact our Customer Service Experts at 800.776.3786.
The HAZMAT 4G designation is a dangerous goods packaging code used to alert shipping personnel that placed inside the outer cardboard container there is inner packaging which contains dangerous goods.
View Complete Details

HAZMAT Shipper Box

Pre-assembled, HAZMAT shipper includes one carton which holds four, 1 gallon paint cans, lids and locking rings, UN Rated 4GY27.9S. Certified to meet UN and UPS requirements, for ground shipments only.
Note: HAZMAT packaging is often sold without the cans, lids and locking rings. For your convenience, this selection includes the cans, lids and locking rings. If you are comparing prices on this item, be sure you are comparing products with the same UN rating, features, and components.
What is HAZMAT Packaging? The HAZMAT 4G designation is a dangerous goods packaging code used to alert shipping personnel that placed inside the outer cardboard container there is inner packaging which contains dangerous goods. The outer packaging eases the handling of smaller containers placed inside the outer carton such as bottles, cans, or tins. Therefore, a cardboard carton with a UN 4G designation is not just a box, it is a package of which the outer carton is just one component, the 4G packaging is a combination consisting of both the outer packaging and inner packaging, including proper inserts, as required.
View Complete Details

Air Shipper Hazardous Packaging Kit

  • Width 17"
  • Height 10"
Air shipper HAZMAT 4G packaging kit with four 1 gallon paint cans is certified for all modes of transportation for hazardous material in groups II or III. The air shipper packaging is rated 4GY28.7S.
Each unit includes one carton as well as four, 1 gallon metal paint cans with lids, Armlock retaining rings*, poly bag and bag tie, box closure tape, and packing instructions. Vermiculite (SKU VS-400) is sold separately.
Certified to meet UN, Air and UPS requirements
* Armlock rings must be used to meet certification requirements.
Note: Specific gravity not to exceed 1.4 tested to 100 kpa
Need help choosing the right kit? Contact our Customer Service Experts at 800.776.3786.
What is 4G Packaging? The HAZMAT 4G designation is a dangerous goods packaging code used to alert shipping personnel that placed inside the outer cardboard container there is inner packaging which contains dangerous goods. The outer packaging eases the handling of smaller containers placed inside the outer carton. Therefore, a cardboard carton with a UN 4G designation is not just a box, it is a package of which the outer carton is just one component the 4G packaging is a combination consisting of both the outer packaging and inner packaging, including proper inserts, as required.
View Complete Details

Air Shipper HAZMAT Pack

  • Height 10 1/2"
  • series Air Shipper HAZMAT Pack With Twelve - 1 Quart Cans
  • Width: 11 3/8"
Air Shipper HAZMAT Pack includes:
One HAZMAT 4G rated carton
Twelve, 1 quart paint cans with lids, Armlock lid retaining rings*
Poly bag and bag tie, 2 absorbent pads, box closure tape and packing instructions.
Air shipping system is certified for all modes of transportation for hazardous material in groups II or III
UN Rating: 4GY23.4S
Certified to meet UN, Air and UPS requirements
*Armlock rings must be used to meet certification requirements.
Note: Specific gravity not to exceed 1.8 tested to 1000 kpa
Need help choosing the right shipper? Contact our Customer Service Experts by live chat at 800.776.3786.
What does HAZMAT 4G mean? The HAZMAT 4G designation is a dangerous goods packaging code used to alert shipping personnel that placed inside the outer cardboard container there is inner packaging which contains dangerous goods.
View Complete Details

HAZMAT Packaging Holds Six

  • Length 14 3/8"
  • Width 9 7/8"
  • series HAZMAT Packaging Holds Six - 1 Pint Cans
Simple to use HAZMAT shipping carton (cans and rings sold separately):
Holds six, 1 pint paint cans (not included)
Eliminates the need for top and bottom pads with its unique fold up design.
HAZMAT packaging contains one carton with attached dividers and sealing tape for closing the carton.
Certified to meet UNDOT and UPS requirements
UN Rated 4GX10.9S.
Creates top and bottom pads when assembled
For ground shipments only
Paint cans and rings are not included, but are sold separately.
HAZMAT 4G designation is a dangerous goods packaging code. It alerts shipping personnel that placed inside the outer cardboard container there is inner packaging which contains dangerous goods.
View Complete Details

HAZMAT Packaging

  • Width 8 3/16"
  • Height 12 3/8"
  • series HAZMAT 4G Packaging Holds Two - 1 Gallon F-Style Cans
This HAZMAT hazardous goods 4G packaging contains one carton and foam for shipping two, 1 gallon metal F-Style cans (not included) containing hazardous materials. Certified to meet UN 4GY51.2S rating and UPS requirements for sea and ground shipments.
To ship by air you MUST use poly bag and absorbents, sold separately. Need help? Get it right the first time - contact our Experienced Customer Service Experts at 800.776.3786.
Cans not included, but are sold separately.
The HAZMAT 4G designation is a dangerous goods packaging code used to alert shipping personnel that placed inside the outer cardboard container there is inner packaging which contains dangerous goods. The outer packaging eases the handling of smaller containers placed inside the outer carton such as cans, tins, or bottles. Therefore, a cardboard carton with a UN 4G designation is not just a box, it is a package of which the outer carton is just one component the 4G packaging is a combination consisting of both the outer packaging and inner packaging, including proper inserts, as required.
View Complete Details

HAZMAT Shipping

  • Length 7 7/16"
  • Width 4 15/16"
  • series HAZMAT Shipping System For One - 1 Gallon Metal F-Style Can
This HAZMAT shipping system includes one 4G carton, box and cap closure tape, corrugated divider, and bag with bag tie. This system is used for shipping one, 1 gallon metal F-Style can (can not included). Certified to meet UNDOT 4GY27.7S rating and UPS requirements, The Hazmat 4G packaging system is used for ground shipments only.
Note: F-Style Can not included but are sold separately.
The HAZMAT 4G designation is a dangerous good packaging code used to alert shipping personnel that placed inside the outer cardboard container there is inner packaging which contains dangerous goods. The outer packaging eases the handling of smaller containers placed inside the outer carton such as a can. Therefore, a cardboard carton with a UN 4G designation is not just a box, it is a package of which the outer carton is just one component the 4G packaging is a combination consisting of both the outer packaging and inner packaging, including proper inserts, as required.
View Complete Details

Air Packaging

  • Width 9 1/4"
  • series Air Packaging for Hazardous Materials With One - 1 Gallon F-Style Can
  • Height 12 3/8"
This air packaging contains a Hazmat carton, 1 gallon F-style metal can with cap, closure protective fiber tube, tape to secure jug closure, absorbentcushioning material, polyethylene bag and bag tie, box closure tape and packing instructions.
Certified to meet UN 4GY7.9S rating for hazardous materials
Shipping system is certified for all modes of transportation for hazardous material in packaging groups II or III
View Complete Details

Hazmat Poison Pax

The Poison Pax for liquid holds a maximum capacity of 32 ounces (1 Liter). Your inner container of glass, plastic or metal (sold separately) must be a maximum of 6 inches high.
Wrap your 32 ounce container in the absorbentcushioning material and place in a poly bag and tie. The poly bag and contents are then placed into a metal can 6 58 inch x 10 34 inch. The metal can is inserted into another poly bag with tie and placed in the inner carton and sealed with tape. The inner carton and contents are put in the outer carton with plastic pressure sensitive box sealing tape.
Holds maximum inner container size: 6 inch high
Metal Can Dim.: 6 58 inch x 10 34 inch
UN rated 4GVX2.9S
Complete pre-assembled certified packs consist of:
Inner and outer corrugated boxes
Metal can, cover and Armlok cover retaining ring (can passes 95kPa test)
Polyethylene bags and bag ties
Absorbent material
Closure retaining tape and plastic pressure sensitive box sealing tape
Note: Your inner container and closure containing contents can be glass, plastic or metal (not included).
View Complete Details

UN Approved HAZMAT Variation Packaging

This UN Approved Hazmat Variation Packaging includes box 9 12 inch X 9 12 inch X 9 inch, poly bag, bag tie and tape. This packaging system was created for the ultimate in flexibility.
You can ship various Group I, II or III hazardous materials by air*, land or sea
Use to ship metal, glass or plastic container
These UN certified 4GV variation 2 super packs are UN rated 4GVX50.7S and meet all requirements for DOT CFR 178.601 and IATA Section 6.3.1.7.
Shipper must use Vermiculite packing material (sold separately) in specified amounts for each stock number. Call our Customer Service Experts at 1.800.776.3786 for details.
Vermiculite cushion and absorbent material is used for shipping many hazardous liquids. Grade number 3 Vermiculite is light weight and absorbs approximately 1 gallon of water ** per cubic foot of material.
**Absorption volume may vary for different liquids
*AIR SHIPMENTS OF LIQUIDS MUST HAVE APPLICABLE HYDROSTATIC PRESSURE REQUIREMENTS CERTIFICATION FOR INNER PACKAGING
ISTA CERTIFIED FOR PROCEDURE 1A
View Complete Details

Grade 3 Vermiculite Absorbent Material

Vermiculite cushion and absorbent material is used for shipping many hazardous liquids. Grade number 3 Vermiculite is light weight and absorbs approximately 1 gallon of water ** per cubic foot of material.
**Absorption volume may vary for different liquids
*AIR SHIPMENTS OF LIQUIDS MUST HAVE APPLICABLE HYDROSTATIC PRESSURE REQUIREMENTS CERTIFICATION FOR INNER PACKAGING
ISTA CERTIFIED FOR PROCEDURE 1A
View Complete Details

Labpacker 55 Gallon Hazardous Waste Disposal Box

  • Length 21 1/4"
  • Width 21 1/4"
Labpackers are easy to assemble and easy to store wherever they're needed with minimum space requirements. The strong double wall fiberboard lab pack container is easy to use and includes an open top, heavy duty gusseted poly liner and a twist tie for sealing.
Use 3 inch filament tape to close labpackers.
They are easily stackable for shipping and no pallets are required. U.S. DOT exemption #14817 permits these containers to be used for lab packing.
Lower your waste disposal costs by 50% or more!
Lighter weight and less expensive than drums or pails
Saves space when storing in labs or warehouse
Eliminates UPS and FEDEX extra handling charges on drums and pails
Other sizes available, call BASCO Customer Service at 1.800.776.3786 for details.
View Complete Details

Hazardous Waste Super Pack

  • Width 36"
  • Length 36"
Hazardous Waste Super Pack is a corrugated waste container, the answer to the complex problems of solid hazardous waste disposal. Hazardous Waste Super Pack cuts handling time, reduces inventory, slashes disposal costs and time, and completely eliminates the need to recondition drums.
Hazardous Waste Super Pack's efficient one-cubic yard capacity is equal to four 55 gallon drums. So you buy 75% fewer containers, store 75% fewer containers, handle 75% fewer containers and still manage the same amount of solid waste. Hazardous Waste Super Pack stores flat, and sets up in minutes making them the most user friendly hazmat packaging materials. Because it burns completely or can be landfilled, theres no contaminated drum to deal with. In fact, Hazardous Waste Super Pack has set the standard for corrugated hazardous waste containers. These hazmat boxes stack two high when full.
Each packaging kit includes:
4G box
6 mil polyethylene linerwire tie
Nails to secure box to pallet (pallet not Included)
Tare Wt. 32.88 KG
View Complete Details

Poly Mailers

  • Dimensions Poly Mailers - 12 Inch x 15 1/2 Inch
Moisture, puncture and tamper resistant. 12" W x 15 12" L poly bag has white outer surface and silver lining provide excellent opacity. Features self-seal lip. High strength seams keep contents secured even when overstuffed.
View Complete Details

Self-Seal White Flat Mailers

  • series Self-Seal White Flat Mailers - 9 Inch x 11 1/2 Inch
Strong 9" x 11 12" chipboard mailers protect photos and documents during shipping. Manufactured from white chipboard, no additional stiffeners needed. Self seal mailer has a peel and seal strip for closing and a pull tear tab for easy opening.
Resists bending or crushing
Lightweight to save on postage
White mailers are .028 chipboard
View Complete Details

Self Seal White Flat Mailers

  • series Self Seal White Flat Mailers - 9 Inch x 11 1/2 Inch - 25 Pack
Strong 9 inch x 11 12 inch chipboard mailer protects photos and documents during shipping. Manufactured from white chipboard, no additional stiffeners are needed. Self seal mailer has a peel and seal strip for closing, and a pull tear tab for easy opening.
Resists bending or crushing
Lightweight to save on postage
White mailers are .028 chipboard
View Complete Details

Plug-N-Lok Security Plug

  • Wt. .50 lb
Make drum security simple and cost effective by using the Plug-N-Lok Security Plug. This security plug will protect expensive drum contents by simply removing the 2 inch and 34 inch plugs and installing Plug-N-Lok plugs. An expandable heavy-duty Geolast gasket expands as the high torque Zytel wing nut is turned clockwise to form a liquid and airtight seal. Once the plug is securely tightened, a padlock must be installed to lock the wing nut in place.
View Complete Details

NPT Inlet GHT Male Outlet

  • NPT Inlet Size 3/4 inch
  • Outlet: 3/4" GHT
  • Wt.: 1 lb
This 34 inch brass faucet's operating handle lifts and turns to precisely control the flow. Intended for gravity flow petroleum products. The large hasp accommodates a large padlock for extra security. It has a 34 inch NPT inlet and 34 inch GHT Outlet (Garden Hose Thread) male thread. Rated to 25 psi.
Non-Potable use only.
Simple 14 turn opens or closes
Easy operating steel handle is padlockable
Fits 34 inch bung opening
ML1 - optional padlock provides optimum security.
SEL8-PTRD - optional 8 inch pull tight seal provides tamper evident security. Seal needs to be cut to be removed.
View Complete Details

Self Closing Standard Handle

  • NPT Inlet Size: 3/4 inch
  • Wt.: 2 lb
Self closing standard gate valve has short formed steel handle and 34 inch NPT Inlet. Excellent for dispensing non-flammable viscous liquids. Super rugged cast iron gate valves have a large, nearly straight bore with an oval discharge opening angled at 45- 60 for fast flow of thick liquids without splashing. The machined and lapped brass faceplate provides smooth operation and a perfect seal. The cast iron valve faucet is an industry favorite for thick liquids
Padlockable handle
Glossy black lacquer finish.
View Complete Details

Drum Leak Tester Air Operated

  • Wt.: 18 lb
Here's an inexpensive way to do your own testing of drums before re-use. This Air-operated Drum Leak Tester is easy to install and use. Simply insert the test plug into any 2 inch NPS drum bung and turn on the air supply.
A pilot light comes on when drum pressure reaches set point. If leakage is detected, pilot light will turn off.
Components include:
Air control panel
NEMA 79 120 volt pilot light
NEMA 1 pressure switch
Test plug assembly with two 10 feet hose assemblies
25 feet of air tubing with fittings for connecting pressure switch to control panel
Air requirement: 5 scfm @ 80 psi.
Power supply: 120 volt AC60 Hz.
Units are factory preset according to your requirements and are non-adjustable. Please specify pressure set point 2 7 psi when ordering.
An explosion proof version is available, contact a Customer Service Expert at 800.776.3786 for details. A seal pressure test plug (SKU 2083) is available for 2 inch NPS plugs.
View Complete Details

B Paintstik Solid Paint Marke

  • Wt.: 0.25
Real lead-free yellow paint in stick form, combines long-lasting durability of paint with ease-of-use of a crayon. Marks on smooth, rough, rusty or dirty surfaces and also marks through oil and water. The temperature marking range of -50 to 150F.
Use this no-mess stick when your mark has to last
All-Purpose solid paint marker
Marks on any surface or material
Weather-resistant, fade-resistant
Standard 1116 inch diameter x 4 34 inch long
Available in 38 inch and 1 inch diameters and in a variety of colors through special order. Call our Customer Service Experts at 1.800.776.3786 for details.
View Complete Details

LED Snake Light

  • Wt.: 1.7 oz.
This LED Snake Light is explosion proof and waterproof. With a diameter of 38 inch its ideal for those small access holes. It is powered by (3) AAAA alkaline batteries (included) and runs up to 60 continuous hours. The aluminum black case has PVC end caps, a non-slip grip, a pocket clip and ONOFF blink switch. The 7 inch aluminum extension cable (insulated with PVC) allows for 14 inch of total reach.
Brings light to those hard to reach places
High-intensity 24 Lumen LED lasts 100, 000 hours
14 inch total reach, folds to only 6.75 inch
UL Classified for Class I, Division 1 in the USA and Canada. Also meets applicable European Community Directives - ATEX Zone 0.
View Complete Details

Chime De-Kinker Straightens Damaged Drum Rims

  • Wt.: 15 lb
Damaged or dented chimes can stop a drum deheader dead in its tracks. Just place the De-Kinker on the damaged chime of a tight head steel drum and pull the handles together to straighten.
The 20 inch long handles offer tremendous mechanical leverage to restore chime curvature and tightness. Use on 30 and 55 gallon drums, either standing up or on their side. Super-durable cast iron construction.
For 30 and 55 Gallon Drums
30 inch long handle
Super Tough Cast Iron
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (BASCO, Inc.)
  • University Park, IL 60484 map, United States
  • Share us via