Post Buy Requirement
BS
United States
Add Review

Other Products / Services

Glycodur F Sliding Bearings

  • Brand Name Product Category
  • Glycodur® Self-Lubricating Bearings
Glycodur F sliding bearings have a steel base, to which a 0.2 to 0.4 mm porous tin bronze layer is sintered. The pores of this layer are filled during a rolling process with polytetrafluoroethylene (PTFE) and other friction reducing additives. A 5 to 30 m top layer made of the same material forms the running-in layer.

Glycodur F sliding bearings optimally combine the mechanical properties of sintered bronze with the sliding and lubrication properties of a PTFE mixture. The structure of this composite material results in good dimensional stability and good thermal conductivity.
View Complete Details

Spiny Liners

  • Product Category Markets
  • Liners Light Vehicle
Spiny liners have strong mechanical adhesion and reduced as-cast liner wall thickness for reduced distortions and improved heat transfer.
Features and benefits include:
High-pressure, die-cast aluminum blocks
Strong mechanical adhesion, and reduced as-cast liner wall thickness for reduced distortions and improved heat transfer
View Complete Details

Hybrid Liners

  • Product Category Markets
  • Liners Light Vehicle Heavy-Duty
n innovative liner design for improved engine performance and reduced emissions.
Features and benefits include:
Outside spray-coated cast iron liner
Optimum bonding in aluminum engine blocks
Delivers lowest distortions and best heat transfer based on the tribological, well-known liner material gray cast iron
View Complete Details

Sprayfit Liner

  • Product Category Markets
  • Liners Light Vehicle
Ultrathin sleeve made of sprayed composite material inserted using a proven press fitting process
Tribologically compatible with all well-known piston ring materials
Sprayfit achieves better heat transfer rates running up to 30 C cooler than conventional cast iron liners for lower fuel consumption
Patented technology
View Complete Details

Self-lubricating Composite Sliding Material

  • allows maintanance-free operation posses high static ( 40, 600 psi) and dynamic (21, 700 psi) load capacity
  • is stick-slip-free with low coefficient of frictio offers a high margin of safety against mating material damage
deva.bm is a thin-walled, self-lubricating composite sliding material. It consists of a backing made of standard steel, stainless steel or bronze with a deva.metal layer applied in a combined rollingsintering process.

deva.bm offers basically the same bearing characteristics as deva.metal but is capable of handling even higher loads and offers an economic solution to many bearing problems.
Reference applications
Water turbines, Injection molding machinery, food & beverage, tire molds, rotor lock in wind turbines, marine & offshore, heavy duty, mining, iron & steel works, steam turbines, gas turbines, compressors
View Complete Details

Self-lubricating Bearing Materials

  • to produce self-lubricating bearings with guaranteed long-term reliability deva.metal® materials are suitable for applications with high static and dynamic loads
  • due to the micro distribution of the lubricant, all deva.metal® materials are also equally suitable t the same time the form of movement, whether translational, rotational or a combination of both, is insignificant
deva.metal is a family of high performance, self-lubricating bearing materials. The deva.metal system is based on four main groups bronze, iron, nickel and stainless steel each containing dry solid lubricant, most commonly graphite, uniformly dispersed within the metal matrix. Important selection criteria are the sliding speed, specific load, temperature and other application specific influences.
Modern designs place huge demands on todays bearing materials, requiring zero maintenance even under severe to extreme operating conditions and maximum loads. Moreover, the permanent cost pressure calls for increasing uptime availability of machines and plants and uncompromising standards of operational reliability.
View Complete Details

Slip-Fit Liners

  • Product Category Markets
  • Liners Light Vehicle
Slip-fit liners are available in finished and semi-finished designs, to create a precise, high-pressure, low-weight solution.
Features and benefits include:
Precise, dry, thin-walled liner solution
Engine block casting technology independent
Finished or semi-finished designs
View Complete Details

Grooved Liners

  • Product Category Markets
  • Liners Light Vehicle
Utilizing grooves enhances grinding efficiency while reducing direct metal abrasion upon the liner.
Features and benefits include:
Wide variety of groove designs and patterns
Applicable to all aluminum casting processes
Basic, economic solution for automotive applications
View Complete Details

Wet Liners

  • Product Category Markets
  • Liners Heavy-Duty
Tailor design optimized bore surface reduces oil consumption and performs under higher peek pressures.
Features and benefits include:
Solutions designed according to block and sealing requirements
Optimized bore surface topography by dedicated honing processes for improved ringliner tribology and low oil consumption
High-strength materials for reduced wall thickness, high peak pressure and cavation prevention
Induction hardening and rolling for locally improved material properties
Finished or semi-finished designs
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Bentley-Harris/Federal-Mogul SP)
  • Exton, PA 19341 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/bentley-harris-federal-mogul-sp/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457720{main}( ).../index.php:0
20.01652020288include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.29112742368include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.29683678072header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice