Post Your Requirement Menu

Welcome User

Other Products / Services

Our product range comtains a wide range of fin, Ring, geo, windsor and BELARO REFLECTOR

fin

  • Power 16W LED down
  • Weight 6 Kg/13.2lb

FIN Housing: Die-cast and extruded aluminium. External Screws: Stainless steel. Lens: Etched glass. Gaskets: One piece silicone. Finish: Silver powder coated RAL9006 or black powder coated. Drivers: HPF, electronic for 120-277V. Cable entry: M20 cable gland. Mounting: Anchorage rods required for concrete. Approvals: ETLUS, ETLC. Wet location IP65.

View Complete Details

Ring

  • Diameter (A) 610mm/24"

RING STATIC COLOR DIRECT & WHITE LED INDIRECT ILLUMINATION Body and trim: Steel and aluminum. Finish: Powder coated. Suspension: Stainless steel cables. Power cable: Silver braided. Diffusers: Opal polycarbonate, supplied in sections. Drivers: Integral, HPF electronic drivers for 120-277V, 0-10V, 1% dimming standard. Mechanical: Luminaires mount directly over J box (by others).

View Complete Details

geo

  • Power 1W LED
  • Max Surface Temp 17°C/63°F

GEO Body and trim: Low copper, die-cast aluminum highly resistant to oxidation. Diffuser: 10mm0.36" tempered glass. IK 10 Mechanical resistant 20 Joule. Gasket: Silicone. Finish: Powder coated. External screws: A4 stainless steel treated with highly antioxidant water-repellent lubricating solution to ensure easy opening. Cable entry: PG13.5 gland for DIA 6-12mm0.24-0.47" cables. Drivers: HPF, electronic. Walk over: Static pressure load 6000Kg13000lbs. Rough-in housing: Thermoplastic. Mechanical: For in-ground or wall installation in poured concrete.

View Complete Details

windsor

  • Power 128W LED
  • Diameter 610mm/24"
  • Height 508mm/20"

Body and trim: Steel and brass. Suspension: Single tube combined with three diagonal decorative tubes for stabilization. Finish: Gear tray, powder coated gloss white. Trim, powder coated or plated as listed. Diffusers: Acrylic. Dust covers: Clear polycarbonate. Drivers: HPF, electronic, 0-10V, 10% dimming standard. Mechanical: Luminaires mount directly over a junction box (not supplied). Remote emergency system: Emergency option provides a 1.5 hour emergency lighting facility. The remote system includes the inverter module, NiCad batteries and a remote wallceiling LED charge indicator and test switch (maximum distance between wallceiling plate and luminaire is 4.5m15’). Test switch fits a single gang box (not supplied).

View Complete Details

BELARO REFLECTOR

  • Power 30W LED
  • Weight 9Kg/20lb
  • Diameter (D) 318mm/12.5"

BELARO REFLECTOR Body and trim: Steel and aluminum. Finish: Powder coated metallic silver. Suspension: Twin aircraft cables (optional tubes for CFL). Power cable: Silver braided. Reflector: High purity aluminum, specular finish with vertical facets. Upper diffuser: UV stabilized acrylic. Decorative disc: 6mm1 4" glass with a polished edge and a sandblasted finish. Decorative ring: 6mm1 4" green tint, acrylic (faux glass) with a polished edge and a sandblasted finish. Drivers: Luminaires supplied with HPF electronic drivers, 120277V. 0-10V dimming standard (10%). Remote emergency: Emergency option provides a 1.5 hour emergency lighting facility. The remote system includes the inverter module, NiCad batteries and a remote wallceiling LED charge indicator and test switch (maximum distance between wallceiling plate and luminaire is 4.5m15’). Test switch fits a single gang box (not supplied). Mechanical: Luminaires mount to a junction box (by others).

View Complete Details

Peyote

  • Power 14W LED

PEYOTE Housing: Die-cast and extruded aluminum. External Screws: Stainless steel. Lens: Clear polycarbonate. Gaskets: One piece silicone. Finish: Silver powder coated RAL9006 or black powder coated. Drivers: HPF electronic, 120277V. 0-10V dimming. Cable entry: M20 cable gland. Mounting: Anchorage rods required for concrete. Approval: ETL for wet locations, IP65.

View Complete Details

SENTIS EQ Housing

  • Power 14W LED
  • Type (A) 457mm/18"

SENTIS EQ Housing: Die-formed steel. Horizontal bars: Die-cast zinc. Finish: Powder coated paint or plated. Reflector: Aluminum, white powder coated. Front diffuser: UV stabilized polycarbonate with vertical ribs. Rear side (halo) diffuser: Extruded opal acrylic. Upper and lower dust covers: Opal polycarbonate. Drivers: HPF, electronic for 120-277V. LED 0-10V dimming (10%) standard. Mechanical: Mounts directly to a standard electrical junction box (by others). Additional mounting points provided. Mounting hardware (by others). Approvals: ETL.

View Complete Details

CRISTAL SML Housing

  • Power 7W LED

CRISTAL SML Housing: Die-cast aluminum. Walk over 1000Kg2200lbs. Bezel: Stainless steel (optional). External Screws: Stainless steel. Lens: 6mm14" sandblasted glass with clear windows for LEDs. Gaskets: One piece silicone. Drivers: HPF, electronic for 120-277V. Trailing edge dimming 120V LED only. Minimum Starting Temperature: -30°C. Conduit entry: PG11 gland for 11mm 5 8" DIA cable. Recessed housing: Molded polypropylene, gray, with stainless mounting trim. Specify as a separate line item. Approval: Wet location, IP67.

View Complete Details

Timpani

  • Diameter 610mm/24"
  • Power 78W LED

Body and trim: Steel and aluminum. Finish: Powder coated. Suspension: Stainless steel cables. Power cable: Silver braided. Diffusers: Opal polycarbonate. Drivers: Integral, HPF electronic drivers for 120-277V, 0-10V, 10% dimming standard. Mechanical: Luminaires mount directly over J box (by others).

View Complete Details

tatto

  • Power 22W LED

TATTO Housing: Low copper, die-cast aluminum highly resistant to oxidation. Diffuser: 10mm0.39" tempered glass (12mm0.47" stainless steel version), Type B 15mm0.59". IK 07 Mechanical resistant 2 Joule. Bezel: Stainless steel or trimless glass. Gasket: Silicone. Finish: Double powder coating polyester high resistant to UV and oxidation. Reflectors: High purity aluminum. External screws: A4 stainless steel treated with highly antioxidant water-repellent lubricating solution to ensure easy opening. Cable entry: M20 cable gland for DIA 6-12mm0.24-0.47" cables. Drivers: HPF, electronic for 120-277V. Dimming 0-10V. Walk over: Static pressure load 500Kg1100lbs. Rough-in housing: Thermoplastic. Mechanical: For in-ground installation in poured concrete.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • North York, ON M3J3E5 map, United States