Post Buy Requirement
BC
United States
Add Review

Our Products

Fin

  • Power 16W LED down
  • Weight 6 Kg/13.2lb
FIN
Housing: Die-cast and extruded aluminium.
External Screws: Stainless steel.
Lens: Etched glass.
Gaskets: One piece silicone.
Finish: Silver powder coated RAL9006 or black powder coated.
Drivers: HPF, electronic for 120-277V.
Cable entry: M20 cable gland.
Mounting: Anchorage rods required for concrete.
Approvals: ETLUS, ETLC. Wet location IP65.
View Complete Details

Stainless Steel Cable

  • Diameter (A) 610mm/24

RING STATIC COLOR DIRECT & WHITE LED INDIRECT ILLUMINATION Body and trim: Steel and aluminum. Finish: Powder coated. Suspension: Stainless steel cables. Power cable: Silver braided. Diffusers: Opal polycarbonate, supplied in sections. Drivers: Integral, HPF electronic drivers for 120-277V, 0-10V, 1% dimming standard. Mechanical: Luminaires mount directly over J box (by others).

View Complete Details

Geo

  • Power 1W LED
  • Max Surface Temp 17°C/63°F
GEO
Body and trim: Low copper, die-cast aluminum highly resistant to oxidation.
Diffuser: 10mm0.36" tempered glass. IK 10 Mechanical resistant 20 Joule.
Gasket: Silicone.
Finish: Powder coated.
External screws: A4 stainless steel treated with highly antioxidant water-repellent lubricating solution to ensure easy opening.
Cable entry: PG13.5 gland for DIA 6-12mm0.24-0.47" cables.
Drivers: HPF, electronic.
Walk over: Static pressure load 6000Kg13000lbs.
Rough-in housing: Thermoplastic.
Mechanical: For in-ground or wall installation in poured concrete.
View Complete Details

Windsor

  • Power 128W LED
  • Diameter 610mm/24"
  • Height 508mm/20"
Body and trim: Steel and brass.
Suspension: Single tube combined with three diagonal decorative tubes for stabilization.
Finish: Gear tray, powder coated gloss white. Trim, powder coated or plated as listed.
Diffusers: Acrylic.
Dust covers: Clear polycarbonate.
Drivers: HPF, electronic, 0-10V, 10% dimming standard.
Mechanical: Luminaires mount directly over a junction box (not supplied).
Remote emergency system: Emergency option provides a 1.5 hour emergency lighting facility.
The remote system includes the inverter module, NiCad batteries and a remote wallceiling LED
charge indicator and test switch (maximum distance between wallceiling plate and luminaire is
4.5m15). Test switch fits a single gang box (not supplied).
View Complete Details

BELARO REFLECTOR

  • Power 30W LED
  • Weight 9Kg/20lb
  • Diameter (D) 318mm/12.5"
BELARO REFLECTOR
Body and trim: Steel and aluminum.
Finish: Powder coated metallic silver.
Suspension: Twin aircraft cables (optional tubes for CFL).
Power cable: Silver braided.
Reflector: High purity aluminum, specular finish with vertical facets.
Upper diffuser: UV stabilized acrylic.
Decorative disc: 6mm1 4" glass with a polished edge and a sandblasted finish.
Decorative ring: 6mm1 4" green tint, acrylic (faux glass) with a polished edge and a sandblasted finish.
Drivers: Luminaires supplied with HPF electronic drivers, 120277V. 0-10V dimming standard (10%).
Remote emergency: Emergency option provides a 1.5 hour emergency lighting facility. The remote system includes
the inverter module, NiCad batteries and a remote wallceiling LED charge indicator and test switch (maximum
distance between wallceiling plate and luminaire is 4.5m15). Test switch fits a single gang box (not supplied).
Mechanical: Luminaires mount to a junction box (by others).
View Complete Details

Peyote

  • Power 14W LED
PEYOTE
Housing: Die-cast and extruded aluminum.
External Screws: Stainless steel.
Lens: Clear polycarbonate.
Gaskets: One piece silicone.
Finish: Silver powder coated RAL9006 or black powder coated.
Drivers: HPF electronic, 120277V. 0-10V dimming.
Cable entry: M20 cable gland.
Mounting: Anchorage rods required for concrete.
Approval: ETL for wet locations, IP65.
View Complete Details

SENTIS EQ Housing

  • Power 14W LED
  • Type (A) 457mm/18"
SENTIS EQ
Housing: Die-formed steel.
Horizontal bars: Die-cast zinc.
Finish: Powder coated paint or plated.
Reflector: Aluminum, white powder coated.
Front diffuser: UV stabilized polycarbonate with vertical ribs.
Rear side (halo) diffuser: Extruded opal acrylic.
Upper and lower dust covers: Opal polycarbonate.
Drivers: HPF, electronic for 120-277V. LED 0-10V dimming (10%) standard.
Mechanical: Mounts directly to a standard electrical junction box (by others).
Additional mounting points provided. Mounting hardware (by others).
Approvals: ETL.
View Complete Details

CRISTAL SML Housing

  • Power 7W LED
CRISTAL SML
Housing: Die-cast aluminum. Walk over 1000Kg2200lbs.
Bezel: Stainless steel (optional).
External Screws: Stainless steel.
Lens: 6mm14" sandblasted glass with clear windows for LEDs.
Gaskets: One piece silicone.
Drivers: HPF, electronic for 120-277V. Trailing edge dimming 120V LED only.
Minimum Starting Temperature: -30C.
Conduit entry: PG11 gland for 11mm 5 8" DIA cable.
Recessed housing: Molded polypropylene, gray, with stainless mounting trim. Specify as a separate line item.
Approval: Wet location, IP67.
View Complete Details

Puzzle

  • Suspension Stainless steel cables.
Body and trim: Aluminum.
Finish: Powder coated.
Suspension: Stainless steel cables.
Power cable: Silver braided.
Drivers: Remote, HPF electronic drivers for 120-277V (EU-240V),
0-10V, 5% dimming.
Mechanical: Luminaires mount directly over J box (by others).
View Complete Details

Timpani

  • Diameter 610mm/24"
  • Power 78W LED
Body and trim: Steel and aluminum.
Finish: Powder coated.
Suspension: Stainless steel cables.
Power cable: Silver braided.
Diffusers: Opal polycarbonate.
Drivers: Integral, HPF electronic drivers for 120-277V, 0-10V, 10% dimming standard.
Mechanical: Luminaires mount directly over J box (by others).
View Complete Details

Tatto

  • Power 22W LED
TATTO
Housing: Low copper, die-cast aluminum highly resistant to oxidation.
Diffuser: 10mm0.39" tempered glass (12mm0.47" stainless steel version), Type B 15mm0.59". IK 07 Mechanical resistant 2 Joule.
Bezel: Stainless steel or trimless glass.
Gasket: Silicone.
Finish: Double powder coating polyester high resistant to UV and oxidation.
Reflectors: High purity aluminum.
External screws: A4 stainless steel treated with highly antioxidant water-repellent lubricating solution to ensure easy opening.
Cable entry: M20 cable gland for DIA 6-12mm0.24-0.47" cables.
Drivers: HPF, electronic for 120-277V. Dimming 0-10V.
Walk over: Static pressure load 500Kg1100lbs.
Rough-in housing: Thermoplastic.
Mechanical: For in-ground installation in poured concrete.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Beta Calco)
  • North York, ON M3J3E5 map, United States
  • Share us via