Post Buy Requirement
B1
United States
Add Review

Other Products / Services

Akiles Roll-Coil Plastic Spiral Binding Coil Inserter

  • Capacity Binding: 230 Sheets
  • Shipping Weight (lbs) 16
  • Binding Operation Electric
Binding101 is proud to offer the Akiles Roll-@-Coil Spiral Binding Coil Inserter that saves time and money. It inserts coil fast and efficiently and is ideal for print-on-demand businesses looking for a low cost coil binding solution. The Akiles Roll-@-Coil can insert spiral coil elements from 6mm to 30mm easily and larger sizes with some practice.

The Akiles Roll-@-Coil has a Diameter Selector that helps you determine what size of spiral coil needed for each specific job. Combine this unit with the Akiles Rubicoil Spiral Binding Punch for a complete low cost Document Binding Solution.

* Approximation based on standard 20 lb. bond copy paper. May vary depending on paper stock.
View Complete Details

James Burn Koilmatic Automatic Table Top Coil Inserter

  • Manufacturer James Burn International
  • Manufacturer Part Number KOILMATIC
  • Shipping Weight (lbs) 221
  • Suggested User Industrial
Introducing the Koilmatic Table-Top Electric Automatic Coil Inserter and Crimper by James Burn. This fully electric table-top automatic coil inserting machine and crimping machine that was designed with the digital print market in mind. The Koilmatic is easy to set up and requires no tools or shop air to be powered. It offers consistent simultaneous crimping on both coil ends for speed and efficiency.

The vertical book placement of the James Burn Koilmatic uses gravity to its full advantage. Tabs and wide covers are no problem for the Koilmatic, and pre-set "cut & bend" mounted blocks are in place for immediate adjustment between the common 8.5" or 11" binding edges. The operator simply slides the cutbend heads into position and tightens the locking arm.

The Koilmatic Inserting and Crimping Machine does not require tools for basic setup and changeover. The machines innovative coil diameter adjustment provides easy and accurate carriage positioning. It has a built-in coil sizing gauge to help the operator confirm the diameter of coil required in relation to the books thickness. The pre-punched book is placed in the machine on spine formers. These spine formers create a curve to the binding edge to allow for easier coil insertion. The spine formers are conveniently stored inside the front panel.

The James Burn Koilmatic has a liquid crystal display screen that guides the operator through the machines setup and operation. The LCD Screen communicates machine status at all times, making it extremely user friendly. It also comes standard with photo instruction manual and a training DVD.
View Complete Details

James Burn DocuPunch MK2

  • Shipping Weight (lbs) 704
  • Suggested User Industrial
  • Punching Operation Electric
  • Power Voltage 110v single phase 60 Hz
The James Burn DocuPunch MK2 is the latest generation automatic punch from the James Burn line. As easy to use as an office photocopier, this versatile, ergonomically designed time-saver offers hands-free punching of pre-collated books, presentations, reports and even tabbed sheets in a free-standing unit that makes quick, light work of your diverse punching needs.

Designed with the Print On-Demand market in mind, setup is simple and is done in less than a minute and die changes only take seconds! Just load the paper, push the start button and walk away. The hands free operation allows your operator to perform other tasks while the punch does the work.

The DocuPunch has been designed for accurate mid-volume automatic punching on demand, punching preprinted collated documents directly from your copier or printer including mixed stocks from 16 lb. bond to 110 lb. index. It features a top of pile, positive sheet pickup and 3-sided jogging into the die for accurate punching registration and perfect holes every time. The punched sheets are kept in perfect pre-collated order and it will also punch index tabs that have a inset on the ends and are pre-collated into the finished sets.

The latest innovation to the DocuPunch MK2 is the addition of a digital touch pad control that is icon based for simple operation. The DocuPunch has 3 cycle speeds of 50, 60 or 70 cycles per minute and also an adjustable pick thickness from 0.4 to 0.7 mm. These allow the machine to maximize production and offer trouble free operation on a wide range of paper stocks and can be adjusted while the machine is in operation from the touch screen. The LCD controls will also alert the operator when the die needs to be lubricated or sharpened and when the chip bin is full.

You can expect to see production rates up to 25, 000 - 35, 000 sheets per hour. These are real world numbers not figures derived by using machine cycle speeds. These are production figures that our customers see using their Docupunch in a working environment, allowing time for operators to load and unload stacks of paper.

There is a wide assortment of die patterns available and the DocuPunch MK2 offers super-fast changeover times. Dies include: Plastic Comb, Wire-O wire, Three Hole, Spiral Plastic Coil and more! Custom dies are also available.

With an incredibly small footprint and heavy-duty casters, the DocuPunch is assured to fit even in the tightest of space requirements and can be moved around the shop to be located where it is needed. It is a document finishing solution that is perfect for central reproduction departments and digital on-demand printers where efficiency and productivity are a must.
View Complete Details

PC246 Plus Plastic Coil Punch Machine

  • Product Weight (lbs) 10.3000
  • Shipping Weight (lbs) 12
  • Punching Operation Manual
  • Punching Capacity 10 Sheets
The PC246 Plus plastic coil binding machine is a low-volume coil binding punch that will work well for your home or small office with minimal binding requirements.The 4:1 pitch for spiral binding plastic coils with 0.250 spacing for four perfectly spaced holes per inch along the binding side. It also features 46 disengageable pins, so you can deactivate up to 46 of the punching holes, making it ideal for anyone looking to punch a variety of paper sizes and still be able to align the holes cleanly. This machine is a punch only, so coils need to be manually inserted into the book by simply spinning them through the holes. In addition, the PC246 plus coil binding machine comes free with coil crimpers that allow you to cut the excess of the coils off and tuck the ends into the coil, finishing your book.

* Approximation based on standard 20 lb. bond copy paper. May vary depending on paper stock.
View Complete Details

Akiles FlexiPunch-M Interchangeable Manual Binding Punch

  • Manufacturer Part Number AFP-M
  • Product Weight (lbs) 42
  • Shipping Weight (lbs) 46
  • Punching Capacity 25 Sheets
If you are looking for an all-in-one modular punch at an affordable price, the Akiles FlexiPunch-M Interchangeable Manual Binding Punch is the machine for you! Akiles has designed this manual punch to use interchangeable dies allowing punching for multiple styles of binding methods including plastic comb binding, spiral coil binding and wire binding. Switching between dies is simple and requires no tools allowing you to change from one punch pattern to another within seconds. Fully disengageable pins on every die allow punching of both standard and unusual sheet sizes without having to worry about partially punched holes on either end.

The FlexiPunch-M can punch up to 25 sheets of 20lb. paper at once. Four different margin depth options allow you to select the optimal depth for the thickness of book to be bound. The machine is made of all metal construction for durability including heavy cast side plates and non-skid feet.

The Akiles FlexiPunch-M is perfect for small printers or copy shops who would like to be able to offer a variety of binding methods to customers for a minimal investment. An electric version of this punch, the FlexiPunch-E is also available.

* Approximation based on standard 20 lb. bond copy paper. May vary depending on paper stock.
View Complete Details

Spiral Binding Coil Cutting Pliers

  • Shipping Weight (lbs) 2
  • Suggested User Personal, Small Office
  • Binding Operation Manual
Cutting and crimping pliers are used to finish your spiral binding plastic coils. They perform two actions with just one motion: they cut the excess plastic spiral coil off, and they crimp in the edge to prevent the coil spines from simply spinning out of your book. Compatible with spiral coils of all sizes, this manual coil finisher tool quickly and easily finishes your spiral bound books for a clean and professional finish. They are a necessity for anyone who makes spiral bound books, and are used in just a few simple steps:



Make sure the red dot side of the pliers is facing up.
Position the pliers tip into the right hand side of the coil. Make sure the crimper is placed in the center of a curved coil.
Squeeze the handles.
Flip your book over and repeat the above steps on the other side.


That's it! In those four simple steps you can finish your spiral coils and have a professionally finished spiral bound book.

Some things to keep in mind: For step 2, keep in mind that the positioning of the crimper head on the coil is important to ensure a completed crimp. Make sure it is centered on the curve of a spiral for the best results. Also, for step 4, you must actually flip your book over to do the over side; simply moving the pliers to the over side without flipping the book will not work because the pliers only crimp in one direction.
View Complete Details

James Burn Koilmatic Automatic Table Top Coil Crimper

Introducing the Koilmatic Table-Top Electric Automatic Coil Inserter and Crimper by James Burn. This fully electric table-top automatic coil inserting machine and crimping machine that was designed with the digital print market in mind. The Koilmatic is easy to set up and requires no tools or shop air to be powered. It offers consistent simultaneous crimping on both coil ends for speed and efficiency.

The vertical book placement of the James Burn Koilmatic uses gravity to its full advantage. Tabs and wide covers are no problem for the Koilmatic, and pre-set "cut & bend" mounted blocks are in place for immediate adjustment between the common 8.5" or 11" binding edges. The operator simply slides the cutbend heads into position and tightens the locking arm.

The Koilmatic Inserting and Crimping Machine does not require tools for basic setup and changeover. The machines innovative coil diameter adjustment provides easy and accurate carriage positioning. It has a built-in coil sizing gauge to help the operator confirm the diameter of coil required in relation to the books thickness. The pre-punched book is placed in the machine on spine formers. These spine formers create a curve to the binding edge to allow for easier coil insertion. The spine formers are conveniently stored inside the front panel.

The James Burn Koilmatic has a liquid crystal display screen that guides the operator through the machines setup and operation. The LCD Screen communicates machine status at all times, making it extremely user friendly. It also comes standard with photo instruction manual and a training DVD.
View Complete Details

Spiral Binding Coil Crimping Pliers

Cutting and crimping pliers are used to finish your spiral binding plastic coils. They perform two actions with just one motion: they cut the excess plastic spiral coil off, and they crimp in the edge to prevent the coil spines from simply spinning out of your book. Compatible with spiral coils of all sizes, this manual coil finisher tool quickly and easily finishes your spiral bound books for a clean and professional finish. They are a necessity for anyone who makes spiral bound books, and are used in just a few simple steps:



Make sure the red dot side of the pliers is facing up.
Position the pliers tip into the right hand side of the coil. Make sure the crimper is placed in the center of a curved coil.
Squeeze the handles.
Flip your book over and repeat the above steps on the other side.


That's it! In those four simple steps you can finish your spiral coils and have a professionally finished spiral bound book.

Some things to keep in mind: For step 2, keep in mind that the positioning of the crimper head on the coil is important to ensure a completed crimp. Make sure it is centered on the curve of a spiral for the best results. Also, for step 4, you must actually flip your book over to do the over side; simply moving the pliers to the over side without flipping the book will not work because the pliers only crimp in one direction.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Binding 101)
  • Little Falls, NJ 07424 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/binding-101/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457856{main}( ).../index.php:0
20.01722028184include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.03292750824include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.04163686512header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice