Our Products #4961534

CENTERLINE BETWEEN WHEELS 134"LENGTH 14.8 FT.WT. 151 LBS.BREAKDOWN LENGTH 80"LOAD RATING 75, 000 LBS. MAXFINISH: POWDER COAT YELLOWTowbar attaches to right rear wheel with convenient to use spring loaded slide pin and auxiliary tow head attaches to left rear wheel and a tie rod is pinned between the two tow heads this allows both tow heads to turn equally in the same direction at the same time. No more manual turning of the left wheel is required. Unit stows easily for transporting to and from the helicopter. The HT-47S breaks down into easy to handle parts to carry aboard helicopter or vehicle.

This tow bar model HRT-100 was designed as a special tow bar for towing the AS-350 helicopter from the rear. There are some helicopters with so much gear attached to the nose it is very difficult to pull them from the front without damage. This tow bar attaches to our Brackett ground handling wheels PN BDW-AT.

The HT-500 is direct replacement for our HM-4M tow bar used on helicopters up 3200 lbs. The HT-500P is the same tow bar with the addition of pressure pads and weight mainly for use on the tail heavy helicopters like the MD500. This eliminates the need for personnel standing on the skids to keep the nose down.

Designed for emergency floats pan or 6 pacFits most any skid tubesRubber protected, adj. spreadVelcro straps for securingSkid Sizes: 2" - 4 12"Length: 130"Skid Spread: 25" - 96"Ship Weight: 145 lbs. (9 cu. ft.)Wheel Caster & LockingTires: Pneu. 2.50-4 50 psiHitch: Ring (R) or Ball (B)Optional Weight Rack (5 lbs. ea.)Color orange powder coatingShipping Information:1 Box: 71" X 9" X 9" - 85 lbs. (5 cu. ft.)1 Box: 34" X 18" X 11" - 60 lbs. (4 cu. ft.)Total weight 145 lbs.

The Model HT-60A is a light weight aluminum tow bar designed for everyday ramp use and can be quickly broken down into two pieces for easy transporting. Pneumatic wheels take the hassle out of moving to and from the aircraft. This tow bar can be used for towing both the UH-60 and the AH-64 by locking the movable pin in the proper position. The assembled overall length is approximately 13 ft. This allows turning clearance for the horizontal stabilizer when using a Hummer as a tow vehicle.

The Model HT-647A tow bar is designed for everyday ramp use and can be quickly broken down into three pieces for easy transporting. Pneumatic wheels take the hassle out of moving to and from the aircraft. This tow bar can be converted to an HT-47S with the installation of the HT-47 kit. The assembled overall length is approximately 13 12 ft. This allows turning clearance for the horizontal stabilizer when using a Hummer as a tow vehicle.

This tow bar is designed for the Bell Helicopters with the 4" skid tubes and 2" tow rings. The special feature is safety as this bar eliminates the need for a man on the stinger. This tow bar has the required clearances when the skids are equipped with snow shoes.The HT-88 is easy to install and can be disassembled into 6 ft. sections for easy transporting. The tow bar comes with a one year warranty.