Our Products #4949194

These models are ideal for protecting office equipment and home electronics from harmful surges and spikes. These models feature state of the art technology; multi-stage, hybrid circuit, LED diagnostics, and power line noise filtration

Our 19-inch 1U Rackmount units are perfect for rack and cabinet applications. These units are 19 inches in length and are constructed of heavy-duty steel. Units are available with outlets on the front or rear and all models have "ears" for ease of mounting. Custom 15" & 23" Rackmounts available.

BPS - M Series is a high performance surge protector designed for critical panel locations. The SPD incorporates high-energy MOVs with EMIRFI noise filtering to provide protection against transients originating from induced lightning strikes and utility switching.

Real-time diagnostics include LED fault indicators for each phase as well as the presence of abnormal voltages between the neutral to ground mode, where applicable. Form C dry contacts for remote indication and an audible alarm ensure the BPS - M Series is always at full capacity.

Housed in a rugged NEMA 412 enclosure these devices are suitable for harsh indoor or outdoor applications. The BPS - M Series is available for all voltages and configurations up to 480Vac.

Brooks Power Systems offers customized pre-wiring for its full line of Extruded Aluminum Raceway Systems to exactly match the specifications of your building or wiring installation plans.

We can work directly from your implementation documentation, or in collaboration with your project management team, to deliver exactly the materials you need to complete the job.



Pre-wiring is available for both our 3800 Series and the 4800 Series Raceway Systems, or a mix of both to precisely address your wiring application.

The Brooks Power BPS 3800 Aluminum Raceway System meets the demands of commercial spaces, providing a handsome and effective method of directing power or communications services where required. The low-profile Surface Mounted Raceway installs easily.

Brooks Power System's Power Distribution Units provide robust and reliable power to electronic racks and cabinet applications. These units are available in a variety of vertical and horizontal configurations. Some of the features and specifications are:

Input Flexibility

120V, 120208V, 120208V WYE 3 Phase, 208V, 208V Delta 3 Phase, 230V, 230400V WYE, 230400V WYE 3 Phase
Current Ratings of 15, 16, 20, 30 and 32 Amp Configurations
Cord Lengths of 1.5 to 15 Feet; Longer Lengths Available Upon Request
Plugs with Locking or Straight Blades Available for all Voltages
IEC Male Inlets are also Available

Output Flexibility

120V, 120208V, 120208V WYE 3 Phase, 208V, 208V Delta 3 Phase, 230V, 230400V WYE, 230400V WYE 3 Phase
NEMA Straight Blade, NEMA Locking Blade and IEC Outlets Available

Mounting Flexibility

Standard Mounting Clip Systems are Available
Custom Mounting Systems are also an option

Surge Protection (Optional)

Only Available on 120 Volt Systems rated 15 or 20 Amps

Additional Features (Optional)

Current and Power Meters allows for current monitoring or monitoring of power, including Voltage, Current, Watts, VA and Power Factor

The BPS-P8AX series coaxial surge protectors have been designed to protect antennas, microwaves, broadband applications, two-way radios, cellular, GPS and CATV equipment against lightning surges and electrical transients. They are a first line of defense for your sensitive equipment.

The BPS-P8AX series employs a patented replaceable gas tube, are waterproof (IP65) and available with three grounding options: M6 ground screw, bulkhead or optional mounting bracket.

These units are designed to protect sensitive communication terminals (telephone sets, fax, modem, ADSL terminals.) connected to analog or digital telephone lines (PSTN or ADSL) from lightning surges and electrical transients. They are compatible with standard telephone connections (6-point RJ11 connector).

They are equipped with a gas tube and clamping diode network in order to provide a powerful and fast surge protection, as well very insertion losses.



The BPS-MJ6-1T are installed instantaneously between the existing jacks of the installation, with no special requirements other than the metal bracket to be connected to the installation's ground network

Brooks Power Systems Multiple Outlet Strips are built with rugged construction in Aluminum, Plastic or Steel

Available in Lengths up to 77 inches, with up to 24 outlets for vertical units. Rack mounted units for 19 inch racks are available in 1U or 2U size. Standard Cord Lengths are either 6 foot or 15 foot.

These unit are available with a rating of either 15 or 20 Amps. They are offered with a circuit breaker, andor optional switchpilot light.

The vertical units are available in Slim Line SL Series, Low-Profile BL Series or Industrial Line BPS Series.

All units come complete with a mounting kit which could be Snap OnSlide Off Clips for the BL and BPS Series, Spring Clip mounting for the SL Series, Rack Mounting for 19 Inch Rack Units and Keyhole mounting for Steel or Plastic Units.

Units are certified by ETL or UL to UL 1363.

Most Aluminum units are made in the USA with US material and labor.

Orders can be custom built to your specifications.