Our Products #4931414

Electrical Insulating Rubber Gloves are available in red, black, yellow and contrasting blackyellow colors in Type I Natural Rubber. The contrast between the outer yellow color against the inner black color makes inspecting for cuts and tears easier when the glove is inflated or stretched. These gloves are also available in blue or contrasting blueorange colors Type II SALCOR rubber.

Salisbury linemens gloves are available in a full range of sizes, from 7 through 12, including half sizes on 8, 9, and 10. Proper fit is important. To determine glove size, measure the circumference around the palm. Allow for additional room if fabric glove liners are to be worn, especially with thermal liners. Type I and Type II gloves are extremely flexible to make working with small parts easy. The gloves meet or exceed ASTM D120 and IEC EN60903 Standards.

Proper storage extends the service life of linemens sleeves. Folds and creases strain rubber and cause it to crack from ozone prematurely. By storing rubber sleeves in the right size bag, and never forcing more than one pair into each bag, equipment will lie flat and extend the life of the product.
Salisbury bags are constructed of heavy duty canvas duck and are double stitched and riveted at stress points for extra durability. Canvas bags feature a D ring for hanging in trucks or on work belts. Bags feature tapered gussets with wide opening tops for easy insertion.

Sleeve buttons, straps, and harnesses are required to wear rubber insulating sleeves properly. Four buttons are required per pair of sleeves. Two straps are required per pair of sleeves. One harness is required per pair of sleeves.

Electrical Insulating Rubber Gloves are available in red, black, yellow and contrasting blackyellow colors in Type I Natural Rubber. The contrast between the outer yellow color against the inner black color makes inspecting for cuts and tears easier when the glove is inflated or stretched. These gloves are also available in blue or contrasting blueorange colors Type II SALCOR rubber.

Salisbury linemens gloves are available in a full range of sizes, from 7 through 12, including half sizes on 8, 9, and 10. Proper fit is important. To determine glove size, measure the circumference around the palm. Allow for additional room if fabric glove liners are to be worn, especially with thermal liners. Type I and Type II gloves are extremely flexible to make working with small parts easy. The gloves meet or exceed ASTM D120 and IEC EN60903 Standards.

Gloves (class 1-3) available in sizes 8, 8-12, 9, 9-12, 10, 10-12, 11, 11-12, and 12.
Rubber Insulating Mittens available in sizes 9, 10 & 11 only.
Gloves Class 0 & 00 available in sizes 7, 8, 8-12, 9, 9-12, 10, 10-12, 11, 11-12, and 12.
Class 4 gloves available in sizes 9, 9-12, 10, 10-12, 11, 11-12, and 12.

8 calcm2 to 100 calcm2 ATPV ratings
8 calcm2 to 75 calcm2 coats are made from arc flash resistant material
100 calcm2 coat is made from TuffWeld and Q9 material layers
Sewn with Nomex thread
32" long
Nomex wristlets.
Expansion back for added comfort
Dual stage front closure with high temperature plastic zipper on the 31 - 100 calcm2 coats
FR hook & pile storm flap
Coats are intended to be used with PRO-HOODS
Meets current ASTM F1506 and NFPA 70E standards.
All are CE 0120 certified.
Sizes S, M, L, XL, 2XL, and 3XL available from stock
Other sizes and orange color available by special order

GREAT WHITE DyneemaNylonSpandex white seamless shell, 13 gauge, gray polyurethane coated palm and fingers.
Washable, resistant to chemicals, water and ultraviolet light.
Seamless construction.
Gray polyurethane coated grip for superior puncture and abrasion resistance.
Color coded hems for easy size identification.
Dyneema is a brand of polyethylene fibers that are 10 to 15 times stronger than steel, more durable than polyester and a strength that is 40 % greater than aramid fiber.

Maximum Safety Journeyman KV professional workman's glove, brown goatskin leather reinforced palm and back, hi-vis yellow knuckle protectors, Kevlar lined, airprene wrist.
Full Kevlar lining.
Genuine goatskin leather.
Split goatskin leather reinforced fingertips.
Internal foam padded palm.
TPR (Thermo Plastic Rubber) Molded knuckle guards.
Nylon Spandex fabric.
Reflective knuckle tape.
Sandy PVC thumb crotch & thumb reinforcement.
Micro cotton thumb.
Easy-on, Easy-off design.
Hook & loop closure patch.

Salisbury's dielectric boots are waterproof and made from premium grade ozone resistant rubber. The flexible hand-layered construction includes a durable nylon lining for easy onoff. The sole has a durable construction with a nonskid bar tread outsole. The attached buckle and hardware is nonmetallic. Available in 21405 17" overboot, 21406 14" overboot, 51508 non-buckle overshoe, and 51509 2-buckle overshoe.

Kits include Voltage Rated Gloves, Leather Glove Protectors and Canvas Glove Bag. Available in sizes 8, 9, 10, 11 and 12.

Class 00 and 0 gloves are available in 11 and 14 inch lengths. Electrical Insulating Rubber Gloves are made from blue Type II SALCOR, or in contrasting blueorange Type II SALCOR. The contrast between the outer orange color against the inner blue color make inspecting for cuts and tears easier when the glove is inflated or stretched.

ASTM Dielectric Footwear provides extra safety when climbing ladders and poles where the deepheel cavity can lock onto the rungs. These bootsand overshoes are 100% waterproof and made from premium grade ozone resistant rubber. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole has a durable construction with a non-skid bar tread outsole. All of Salisburys ASTM Dielectric Footwearconforms with ASTM F1117 and all are 100%tested to the electrical hazard requirements of ASTM F1116 at 20, 000 volts.

ASTM Dielectric Footwear comes in four styles all with pole-climbing reinforcement patch. The Overshoe is available without buckles or with two buckles. The Overboot with adjustable side strap features a 14 height or a 17 height. The attached buckle and hardware is nonmetallic. NEW Improved Overshoes-Salisbury now offers improved 51511 non-buckle overshoe and 51512 2-buckle overshoe. The improved overshoes include a bob sole with aggressive tread for better traction. The deep heel and improved arch are specially designed for climbing ladders comfortably. The wider opening allows for easier onoff.