California Fine Wire Co.

• Annealing ProcessBright Annealing Strand
• Atmospheric GasHydrogen Argon Oxygen
• Annealing TemperatureUp to 2000° F
• Wire ShapeRound Stranded
• MaterialsAluminum Copper Nickel Nickel Alloys Resistance Wire Alloys Thermocouple Alloys Gold

At California Fine Wire Co. we provide multiple annealing options that allow us to custom tailor the metallurgy of the wire to a given application. The wire drawing process creates stresses in the wire which lead to a higher strength which may not be desirable for certain applications. During the annealing process, the wire is heated to a temperature that releases the stresses caused during cold working, making the wire more ductile. In addition to releasing stresses, annealing makes the metal very homogenous in structure. We offer reel-to-reel or strand annealing, in which the wire is heat treated as it is fed through the furnace and wound onto another reel, and batch annealing, which is performed on small volumes in a designated furnace. We are able to perform atmosphere annealing with H, N, Ar, and sometimes He. To prevent any reactions between the surrounding atmosphere and the heated wire, annealing is performed in a pure hydrogen, oxygen, or argon atmosphere, depending on the wire material and the type of annealing being performed. For wire that is especially susceptible to reactions with atmospheric gases during annealing, vacuum annealing can be performed upon request. We can process any volume of wire from small research quantities to bulk production, and package wire onto spools or into cut length as needed, depending on customer preference. For additional information about our custom wire annealing capabilities, see the table below or contact us directly.

• Wire ShapeRound Stranded Duplex
• ColorsClear (Standard) Green Blue Black White
• Operating Temperature240°C (464°F)
• Wire Diameter0.001" to 0.020" 25 microns to 0.5 mm Other Sizes on Reque
• Wire LengthCut Lengths: 0.125" to 72" Up to 1,000 ft (300 m) per Spool

California Fine Wire Co. offers a high quality PTFE fluoropolymer insulation that is suitable for medical applications as well as many others. PTFE is often a desirable choice when low friction, non sticking qualities are needed. PTFE is chemically inert in most environments. We apply the PTFE coating to our wire in a thin layer. This allows us to control our tolerances tightly and keep our wire sizes small, even with insulation. Our PTFE coating does not require any primer to adhere to our wire, so the end result is a single coating, high purity PTFE insulation. We are able to apply this coating to any alloy that we carry, and since we produce primarily in custom runs, we can build to a wide range of insulation thicknesses.