Post Buy Requirement
CA
United States
Add Review

Other Products / Services

Steady-On Beacons

For safety lighting, continuous communication sources, obstacle warnings, exit or entrance lights, and for identifying the location of safety equipment such as showers or emergency telephones. Suitable for use in hazardous areas.
View Complete Details

Rotary Handle Circuit Breaker Mechanisms

  • Type L UL 489
Type L UL 489 Rotary Handle Circuit Breaker Mechanisms
Door-mounted, variable-depth operating mechanisms feature heavy duty, all metal construction with trip indication.
View Complete Details

IRTEL Inset Runway Threshold

  • Volt 48 W, 105 watt
The IRTEL is a medium intensity bidirectional light (using one 48 W lamp for the green side and one 105 watt lamp for the red side). This fixture is used on runways where the threshold and end lighting are co-located and where it is impractical to use an elevated light.
View Complete Details

Status Lights

Status Lights
For process status, messaging, and alert or emergency condition indication. Suitable for use in hazardous areas.
View Complete Details

Solar Aviation Light

  • Series AV425/AV425-RF
AV425AV425-RF Solar Aviation Light
Applications:
Solar Runway Edge Light
Solar Threshold Light
Approach (Strobe & Fixed)
Solar Obstruction Light
Helipad
Tactical
View Complete Details

Weather Resistant

Tamper & Weather Resistant
Ensure safety and weather resistance in wet and damp outdoor locations with the ultimate in safety outlet protection.
View Complete Details

AGS-LED Airside Guidance Sign

  • Model AGS-LED
Airside signs Model AGS-LED are designed for use on airport taxiways to mark taxi routes and intersections. Colors may be black on yellow, yellow on black, or white on red depending on the application as defined by the governing standard FAA AC 1505345-44 and Engineering Brief 67. Black signs with white numerals are used to indicate distance remaining in thousands of feet of runway.
View Complete Details

RGL4 Runway Guard LED Light

  • Series RGL4
The RGL4 (Runway Guard Light) is used to enhance the visibility of taxiway holding positions, preventing runway incursions and warning pilots they are approaching an active runway. Two RGL4 fixtures are installed one at each end of the holding position line. Each fixture alternately flashes its two signal heads.
View Complete Details

Safety Switches

Eaton's Safety Switches are applied as service entrance and branch circuit protection as well as motor disconnects for safe switching and lock-out, tag-out (LOTO) applications.
View Complete Details

Solar Disconnects

Eaton offers a line of solar disconnects that provide the best solution for switching DC solar photovoltaic circuits. It is the first UL 98 listed switch labeled as "suitable for NEC Article 690 photovoltaic applications per UL 1741 requirements."
View Complete Details

Steel Square Outlet Boxes

  • Size 4 Inch
Steel Square Outlet Boxes:

Are for use with conduit

Can be ceiling mounted to be used as a junction box or to mount lighting fixtures

Are available in red for fire alarm applications
View Complete Details

Elevator Control

The Eaton Elevator Control Switch is an all-in-one device that allows customers to meet all applicable codes related to elevator shut down.
View Complete Details

Weather Resistant

Weather Resistant Receptacles offer protection from rain, snow, ice, moisture, and humidity when properly installed in an approved weather protective or while-in-use cover.
View Complete Details

Tamper Resistant

Tamper Resistant Receptacles feature integral protection, far superior to traditional receptacles with removable plastic safety caps.
View Complete Details

ZIP Intermediate Class Polymer Arresters

  • Type ZIP
  • voltages 161kV
The type "ZIP" intermediate class arresters offer the benefits of polymer housings for system voltages up to 161kV.

The arresters are approxiately 15 the weight of the porcelain equivalent.

Handling and installation become much easier tasks. Also, the risk of damage to the housing is reduced compared to porcelain.
View Complete Details

TEL Taxiway Edge Light - LED

  • Model 5
TEL Taxiway Edge Light - LED
The TEL Model 5 is used as a medium intensity, taxiway edge light, for constant current circuits
View Complete Details

Electronic Pcb

  • Size 5x15mm, 5x20mm
-14" to 1" Ferrule and Axial Leaded Glass Tube Fuses

-14" x 1-14" Ferrule and Axial Leaded Glass and Ceramic Tube Fuses

-5x15mm Ferrule and Axial Leaded Glass Tube Fuses

-5x20mm Ferrule and Axial Leaded IEC and UL Glass and Ceramic Tube Fuses

-Fuse Holders for Printed Circuit Boards

-Fuseclips for Printed Circuit Boards
View Complete Details

Fuses - Medium Voltage

-BBU Boric Acid Fuses
-British Standard IEC Fuses for Use in Oil Filled Distribution Switchgear : OEFMA
-DIN Dimensioned IEC Fuses for Transformer Protection
-Fast-acting Fuses : HVA, HVB, HVJ, HVL, HVR, HVT, HVU, HVW & HVX
-R-rated Fuses for Motor Circuit Protection
-Potential Transformer Fuses: AB, AM & CAV
-E-Rated
-Fuseclips for Medium & High Voltage Fuses
Fuseclips for M
View Complete Details

Rymco Electrical Metallic Tubing

  • Size 1/2”
12 through 4
High-Grade mild Strip steel
Mexicos only U. L. 797 producer
( for the past 15 years )
Inline Galvanized
Coated Interior Wall
ANSI C80.3
View Complete Details

Street Light Applications

  • diameters 6”, 8”, 10”
  • Lengths 5 - 10 ft
High strength pipe

Rugged helix for diffi cult soils
Lead point stinger to facilitate initial penetration and setting the plumb Structural steel top base plate with slots for variable bolt hole circles to meet
pole base dimensions
Supplied with high strength bolts to secure pole
Available in 6, 8, 10 diameters
Lengths from 5 - 10 ft
Two - sided entrance wiring slots
Torque ratings up to 20, 000 ft-lbs
Hot dip galvanized for corrosion protection
Installs in minutes
Reduced total installation costs
Poles can be installed immediately
No building forms, setting rebar and anchor bolts
Installation in all weather conditions
Minimal site cleanup of disturbed soil
View Complete Details

Electronic Fluorescent

Keystones extensive portfolio of electronic ballasts covers all fluorescent lighting applications, including commercial, industrial, and residential type lighting fixtures. Known for their dependability and energy efficiency, every Keystone electronic ballast is burnt in at the factory to ensure exceptional performance and superior reliability.
View Complete Details

Expanding (Bust) Anchor

Expanding (bust) anchors are made for installation in holes augered by power drillers.

One piece formed anchor with wings and a base.

A retainer on the bottom holds the nut from the forged eye rod (sold separately)
View Complete Details

Condulet Stainless Steel Conduit Bodies

ttings deliver power where you need it, saving you time and money throughout the life of your facility.
Superior resistance to corrosion and heat, combined with unmatched strength, make stainless steel Condulet bodies and boxes a long term solution for even the most extreme environments.
Five times the strength and three times the lifespan of a typical cast aluminum tting.

Cooper Crouse-Hinds Stainless Steel ttings are manufactured using high grade 316 stainless steel. Even in the most caustic environments, they are virtually immune to rust, corrosion, and discoloration, greatly lowering cost of ownership through maintenance reduction.

The ttings are even self-healing. If scratched, the chromium in the stainless steel will combine with oxygen to reseal its protective layer and maintain its corrosion protection properties.

This long-life, low-maintenance solution is ideal for:
Food and beverage manufacturing
Pharmaceutical manufacturing
Healthcare facilities
Wastewater treatment plants
Marine applications
Mining applications
View Complete Details

Single-Phase Pad-Mounted Transformers

Single-phase pad-mounted distribution transformers provide superior value and reliability, with a variety of options to increase system protection and environmental responsibility.
View Complete Details

MSB Bracketed Boxes

For the fastest, most secure installation of outlet boxes on steel studs

PowerGrip MSB metal stud bracketed boxes are designed from special spring steel to allow for quick and easy tool-free installation in new work, steel stud applications
View Complete Details

Audible Signaling Devices

Combination Visual & Audible Signaling Devices
Strobe light and audible tone generator in one package. Suitable for use in hazardous areas.
View Complete Details

Photocontrols

  • Series 5000M
Pair Tork 5000M Series photocontrols with NSi Lighting's dusk-to-dawn offering as a perfect solution to highway and street lighting. Tork's turn-locks and Photo Timers are built with high impact UV stabilized enclosures, and provide dependable ambient light readings - available with built-in delayed or instant response.
View Complete Details

Digital Time Switches

24 Hour, 7 Day, 365 Day, astronomic and cycle timers for precision control of large and small scale lighting, pump, fan, farming applications and more.
View Complete Details

Occupancy Sensors

Ceiling & wall mount occupancy sensors using ultrasonic andor PIR technologies for superior minor motion detection and long-range detection applications.
View Complete Details

Heat Detectors

Call points are used for fire alarm activation, evacuation, and process shut-down. Heat detectors are used in turbinegenerator skids, switchgear or motor control status rooms, and process tank areas or transmission lines.
View Complete Details

Galvanized Rigid Conduit

  • Size 1/2” , 6”
12 through 6
Damage-resistant while flexible
Hot-dipped galvanized
Smooth Intext surfaces
Chromate coating protection
Threads galvanized after cutting
UL 6 approved
Produced to ANSI C80.1 specs
150-9001 Edition 2000 compliant
View Complete Details

Cross Plate Anchor

Cross plate anchors are made for installation in holes augered by power drillers.

One piece plate anchor formed of two structureal members that are ribbed for reinforcement.

A retainer on the bottom holds the nut from the forged eye rod (sold separately)
View Complete Details

HID High Intensity Discharge

Known for dependability and superior efficiency, Keystones high intensity discharge (HID) ballasts are perfectly suited for even the most demanding HID lighting applications. Keystone utilizes sophisticated manufacturing and quality control processes to guarantee outstanding performance in the field.
View Complete Details

BG Fuse Blocks

  • Voltage 600V (0-20A); 480V (25-60A)
Class G, BG & G Series Fuse Blocks
Voltage Rating600V (0-20A); 480V (25-60A)
Amp Ratings1-60 Amps; UL Listed, Guide IZLT, File E14853
Construction(0-30) Thermoplastic; (35-60) Phenolic
Agency ApprovalsCSA, Class 6225-01, File 47235
View Complete Details

Pre-fabricated HomeRunner Junction Box

Can be used to terminate multiple wiring methods including AC, MC, MCA-I, NM or EMT
Designed for use in commercial construction projects, it is ideal for hotels, motels, condos, assisted living centers, etc.
View Complete Details

Channel Cable Tray - Metallic

Cooper B-Line Metallic Channel Cable Tray is available in ventilated and non-ventilated options. Ideal for light-weight indoor applications, they are often used to separate and support smaller cable runs from larger cable runs.
Features of the system include:

Sides and bottoms open for loading and inspection of the cables
Light-weight, corrosion-resistant aluminum construction
Cable fill area free of sharp edges and connection hardware
Accessory options for complete installations without traditional cable tray fittings
View Complete Details

Lumark Large Floodligh

  • Volt 150W - 400W
Compact, affordable solution for general floodlighting applications

Durable dark bronze polyester powder coat die-cast aluminum housing

Heavy duty slipfitter or trunnion models optimize mounting

Formed aluminum reflector optimizes wide beam efficiency and control

Tempered glass is heat and impact resistant

Stainless steel screws secure the integral hinged door

Offered in 150W - 400W metal halide and high pressure sodium

Available with optional NEMA twistlock or button photocontrol
View Complete Details

Strobe Lights

For condition signaling, security alerts, equipment obstruction warnings, and emergency evacuation signaling. Suitable for use in both hazardous and non-hazardous areas.
View Complete Details

Flextray Cable Tray

Flextray is a flexible, field-adaptable way to manage cables throughout your project. The tray itself can be cut
and bent to the needs of the installer on the jobsite, allowing cable runs to be adjusted as needed.

The wide range of sizes offered by Cooper B-Line makes Flextray a great choice for everything from a small cable drop
to a large trunk of cables. Our tray has the market-preferred "T" weld safety edge, protecting both the cable
and the installer during cable installation. Flextray is also UL Classified as an equipment grounding conductor.

The F.A.S.T. System is Foldable, Adjustable, Stackable, and Tool-less, providing many options to manage
cables inside your raised floor space. With only a few parts, you can create everything from a basic single
layer installation to a cantilevered, multiple-tier cable run. Make the most of your raised floor space and your
time with the F.A.S.T. System!
View Complete Details

Audible Signaling Devices

Audible Signaling Devices
For plant-wide alarm notifications and audible process alarms. Suitable for use in hazardous areas
View Complete Details

ABE Vertimark II Lumark Aluminum Low-Bay Luminaire

  • Size 3/4"
Standard quick mounting plate for 34" IPS conduit

Die-cast aluminum housing with durable white polyester powder coat

Hinged refractor permits re-lamping without removal of refractor

Acrylic prismatic refractor for optimal optical control

Removable ballast compartment cover provides easy internal access

Optional mounting bracket fits a standard 4" J-Box or outlet box
View Complete Details

Rigid Pvc Pipe

  • size 4"x4"x2" to 12"x12"x8"
Professional electricians ask for Scepter conduit by name for the quality and superior performance that ensures a long trouble free life.

Scepter conduit is light weight and offers excellent chemical resistance, high tensile and impact strength, and the FT-4 rating permits use in noncombustible construction.

Suitable for exposed, concrete encased and direct burial applications, Scepter conduit requires no extra protection and is third party certified by CSA, NSF and NRTL.

Expansion Fittings - A leading pioneer in PVC piping for electrical applications, at IPEX we understand conduit expansion and contraction. We offer an extensive range of expansion fittings in all sizes, for use with Scepter rigid PVC conduit.

Junction Boxes - NEMA rated 1, 2, 3, 4, 4X, 6P, 12, 13 and UL approved for use in wet locations, Scepter PVC molded square junction boxes are available in size from 4"x4"x2" to 12"x12"x8" and supplied with threaded brass screws and inserts, flexible PVC gaskets and external mounting feet. Nylon or stainless steel screws, as well as larger sizes are available on request.

Access Fittings - CSA certified and UL listed, Scepter access fittings come fully factory assembled in an extensive range of access fitting sizes (" to 4") or hub configurations (LB, T, LL, LR, TB, C, E). Manufactured with threaded brass screws and inserts, and flexible PVC gaskets, Scepter access covers can be removed as often as needed without wear or cracking. Stainless steel screws are available on request.

Boxes & Covers - Scepter F-Series 3-in-1 PVC surface-mount outlet boxes are available in single (deep), double and triple-gang configurations, with ", " and 1" inch entry hubs all in one box. Manufactured with stainless steel return-springsclips and packaged with brass screws, Scepter weatherproof covers provide a positive seal, even in cold temperatures.

Service Entrance Fittings - Scepter rigid PVC conduit is suitable for use in both overhead and underground service laterals. A complete range of non-corroding PVC service entrance fittings is available, including meter hubs, weather heads and meter offsets.
View Complete Details

HID Electronic Ballast

  • Volt 20 Watts to 150 Watts.
Designed to provide optimal lamp performance and maximum energy savings. With enhanced capabilities to downsize the luminaire housings and reduce wiring costs, VS electronic HID ballasts lead the way to electronic solutions for HID lighting. Microprocessor controlled intelligence offers superior lamp performance and the flexibility for proprietary value-added functions. VS electronic HID ballasts cover your HID needs with products for Metal Halide Lamps ranging from 20 Watts to 150 Watts.
View Complete Details

Zforce ZNP Arresters

  • Voltage 1, 000 amps
Zforce Arresters have mold-on polymer housing for the ultimate seal against moisture ingress

High strength Fiberglass for high fault-withstand design

Integrated Ground Lead Disconnet for fast, reliable operation. Operates in less than 2 seconds at 1 amp and less than 2 cycles at 1, 000 amps
View Complete Details

Sign Ballasts

Keystones line of sign ballasts makes commercial sign maintenance simple. With only six ballasts that cover virtually all common plastic sign configurations, youre sure to have the right ballast for the job.
View Complete Details

Steel Square Extension Rings

  • Size 4 Inch
Steel Square Outlet Extension Rings:

Are for use with 4" square boxes

Extension rings are used when extra cubic inch capacity is needed for additional wiring

Are available in red for fire alarm applications
View Complete Details

Single-Phase Overhead

Single-phase overhead distribution transformers provide superior value and reliability, with a variety of options to increase system protection and environmental responsibility.
View Complete Details

Solar Pass Through Boxes

  • Series CPBF
CPBF Series Solar Pass Through Boxes are used in residential applications to provide a low profile, cost-effective way to group input wirescircuits from several arrays andor solar panels and transition from solar (PV) cable to regular building wire. The Pass Through Box was designed for PV applications where overcurrent protection is not necessary due to the low power rating of the PV string.
View Complete Details

Fuses - High Speed

Drive Fuse High Speed Fuses
High speed, current-limiting fuse. The Cooper Bussmann Drive Fuse will provide maximum protection for AC and DC drives and controllers and meet NEC branch circuit protection requirements. The Drive Fuse has the lowest I2t of any branch circuit fuse to protect power semiconductor devices that utilize diodes, GTOs, SCRs and SSRs
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Richard Adanusa (Camiex)
  • 12003 Windy Rock Way, United States
  • Share us via