Our Products #4951195

Sidewinder 8" dusting brush with 100% natural fill and 1.5" neck. This tool is used with a wand and is a great combination with backpack vacuums for office buildings, institutions, hospitals, etc. By using this product cleaning efficiency is increased exponentially as well as making it less physically taxing. The tools unique design uses a side to side sweeping motion instead of hunched over pushing and pulling a heavy commercial vacuum causing a lot of strain on their back. It is used with a straight wand rather than the traditional "S" or "J" wand system used with traditional tools. These tools have found great favor with contract cleaners for their ability to increase productivity and detail tight places. The Sidewinder tool is wide one way to cover more surface area when cleaning open areas and narrow the other direction to make it possible to clean those tight spaces without having to pull out a hose and attachment and bending over with your traditional vacuum, which makes it possible to easily navigating around and under furniture. The flexible neck permits the tool to flex 90 to the wand. This permits the tool to vacuum across the tool width, vacuum end on, or to vacuum vertical surfaces with equal effectiveness. The Sidewinder tools are perfect low cost solution for your commercial cleaning needs.

Reach System industrial wet-dry vacuums are available in two and three motor configurations. The motors can be activated individually as application requires helping to preserve motor life and providing maximum user flexibility. The heavy duty polypropylene molded head can handle significant impact without damage, protecting the motor, switches and other key components. The heavy duty polypropylene latches are virtually unbreakable providing years of use in demanding factory and field applications.

Unlike many other commercial vacuums, Reach vacuums are mounted on heavy duty metal frames that allow their use in applications where the vacuum will be on and off trucks or in and out of vans at the job site. The heavy metal frame makes them ideal for moving over uneven ground or in true industrial plant applications. Reach vacuums ride on heavy duty caster wheels designed to take impact and move over uneven surfaces without the risk of failure. The heavy duty frame is equipped with a tilt feature making emptying the bin easy without the risk of plugged drain hoses or risk of injury. A drop chain grounds the metal frame reducing the risk of nuisance shocks to the user when working on high overhead with the reach pole and cleaning tool range.

The bin of the Reach series is a heavy gauge stainless in line with the industrial nature of its intended design. Reach vacuums are available with either HEPA or standard cartridge filters depending on the needs of the application. The filters are designed for easy installation using a positive hand threaded locking bolt insuring a tight seal to the vacuum head. The cast metal inlet port is offset to permit dirt and debris to enter under a heavy steel cone creating a true cyclonic separation of dirt and debris. This cyclonic action helps preserve the HEPA filter as heavy debris falls efficiently to the bottom of the can away from the surface of the filter. By separating bulk debris you maintain vacuum suction even as the bin fills. The cast metal inlet port and hose end provide for long life in demanding applications.

Reach vacuums are equipped with a one meter heavy duty grounded service cord to reduce down time and service costs. A full 50 foot three wire extension is provided standard with all Reach vacuums. By using an extension cord the risk of having to replace the vacuum cord itself is greatly reduced.

Extension hose with cuffs that fit any tool and any vacuum including upright vacuums, backpack vacuums, canister vacuums, and central vacuums. The hose is a safety orange color.

With the "All Things Crevice" detailing package you can clean all of those hard to reach nooks and crannies. With the flexible crevice tools you can reach around furniture instead of having to move it. The plastic nozzles allow you to clean in tiny crevices where normal tools are too large to fit.

High ceilings and hard to reach ledges in homes and buildings can be difficult to clean and even dangerous. With a Reach system it is possible to clean those areas far more quickly and with less effort than before. Capable of reach up to 21 feet the Reach system can get to all of those places you used to have to climb a ladder to get to. The wands are made out of aluminum making them light weight, giving you full control, which makes it easy to move from one area of cleaning to the next. There are three wand ends for different applications that all have an ABS locking system to ensure your tools don't fall off while cleaning. The straight wand is used to clean areas that are easily visible like ceilings and walls.

This Reach kit features:

Three Telescopic Black Aluminum Extension Wands
Locking 18" Straight Extension Wand
Locking 18" 45 Degree Curved Extension Wand
Locking 24" 130 Degree Curved Extension Wand
8" Sidewinder Brush with Chrome Steel Collar
18" Sidewinder Brush with Chrome Steel Collar
1.375" x 30' Crushproof Hose
1.25" Black Bullet Cuff
Electric Banded Cuff
1.5" x 5" Aluminum Connector

Consumers are showing a strong preference for the new high density soft carpets which pose a unique problem for many high performance vacuums and power nozzles. Not only have the high density soft carpets been difficult to clean, the consumer has often found they cant push the vacuum across the surface. Cen-Tec Systems is pleased to introduce the new Response II CT23 power nozzle, which combines features typical of premium power nozzles with a unique self regulating air by pass system which automatically adjusts air flow to floor conditions permitting a true deep clean in a system designed to move freely over even the highest density soft carpets.

Power nozzles on traditional carpets permit the air to flow under the agitator, traveling up and back carrying the dirt into the air stream. The new high density soft carpets prevent the air to enter through this traditional means. The challenge was to develop a solution which adjusts to meet carpet conditions while still keeping the air stream entering under the agitator for an effective clean. Other systems vent, but much of the air is wasted traveling over the agitator not under where it is most effective in carrying away dirt.

Should the nozzle begin to seal to the carpet, the Response II CT23 allows a self adjusting air relief entering through vents in the hood of the nozzle. This channels air uniformly down and across the front face of the nozzle and delivers the air under the agitator as with traditional power nozzles. The result is no wasted air flow, effective cleaning, and a self regulating system that works as well on traditional carpets as it does on the new high density ultra soft carpets. The Response II is an innovative solution to a challenging problem.

The Response II CT23 delivers the premium features demanded by discriminating consumers. It includes:

Quiet Drive poly V belt for long life, which is positioned away from the end of the agitator, providing true edge cleaning to both sides of the nozzle.
Trouble free tilt and roll over molded wheels positioned inside the agitator for excellent surface grooming.
A four position height adjustment is ideal for use on both traditional or high density soft carpets.
Control of the wand release and height adjustment is located to eliminate the need to raise ones foot from the floor to control the feature.
A double swivel neck for improved maneuverability.
A soft wrap around bumper protects furnishings and base boards from unwanted marks.
Headlight, quick wand release, a low profile, and high styling speak to the quality of the Response II CT23.

The 39310 hanger bracket is designed for mounting either the 92146 or the 92135 on masonry or wood frame walls. Made of powder coated steel, it is truly a commercial bracket that will provide access where you need it delivering life time use and support for your commercial reel system. Mounting hardware is included. The 39310 features a tracking mechanism that aligns the reel to the user as they pull the hose from the reel, reducing effort and permitting the user to work in a wider arc without stressing the hose.

Wet-dry and dry commercial vacuums are commonly used by building contractors, contract cleaners, auto detailers, auto body shops, factories, and consumers across America. The 92146 reel system permits the vacuum to remain stationary by providing a 50 foot hose that takes the working end of the vacuum hose to the work rather than pulling the vacuum along. The heavy duty commercial reel makes it easy to access only the hose needed for a particular job and nicely collects the hose when not in use. Works equally well wet or dry. The 92146 includes a heavy duty steel construction commercial hose reel, equipped with a full 1.5 X 50 foot crush proof commercial hose in safety orange for high visibility, and a six foot 1.50 hose for connecting the system to common size wet-dry vacuums. Made in the USA

The 50679 wiring harness is designed for use with the Cen-Tec low voltage hoses. This is a two-wire two position switch.

Consumers are showing a strong preference for the new high density soft carpets which pose a unique problem for many high performance vacuums and power nozzles. Not only have the high density soft carpets been difficult to clean, the consumer has often found they cant push the vacuum across the surface. Cen-Tec Systems is pleased to introduce the new Response II CT23 power nozzle, which combines features typical of premium power nozzles with a unique self regulating air by pass system which automatically adjusts air flow to floor conditions permitting a true deep clean in a system designed to move freely over even the highest density soft carpets.

Power nozzles on traditional carpets permit the air to flow under the agitator, traveling up and back carrying the dirt into the air stream. The new high density soft carpets prevent the air to enter through this traditional means. The challenge was to develop a solution which adjusts to meet carpet conditions while still keeping the air stream entering under the agitator for an effective clean. Other systems vent, but much of the air is wasted traveling over the agitator not under where it is most effective in carrying away dirt.

Should the nozzle begin to seal to the carpet, the Response II CT23 allows a self adjusting air relief entering through vents in the hood of the nozzle. This channels air uniformly down and across the front face of the nozzle and delivers the air under the agitator as with traditional power nozzles. The result is no wasted air flow, effective cleaning, and a self regulating system that works as well on traditional carpets as it does on the new high density ultra soft carpets. The Response II is an innovative solution to a challenging problem.

The Response II CT23 delivers the premium features demanded by discriminating consumers.

This kit includes:

Response II CT23
35 Foot Universal (Pig Tail) Hose
Graphite Plastic Hose Hanger
12" Hard Floor Brush with Natural Fill
Dirt Sensor ButtonDown Chrome Integrated Wand
ButtonDown Black Painted Aluminum Friction Telescopic Wand
Premium Dust Brush
Premium Upholstery Tool
Premium Crevice Tool
Wand Clip-on Tool Caddy

Response II CT23 features:

QuietDrive poly V belt for long life, which is positioned away from the end of the agitator, providing true edge cleaning to both sides of the nozzle.
Trouble free tilt and roll over molded wheels positioned inside the agitator for excellent surface grooming.
A four position height adjustment is ideal for use on both traditional or high density soft carpets.
Control of the wand release and height adjustment is located to eliminate the need to raise ones foot from the floor to control the feature.
A double swivel neck for improved maneuverability.
A soft wrap around bumper protects furnishings and base boards from unwanted marks.
Headlight, quick wand release, a low profile, and high styling speak to the quality of the Response II CT23.