Post Buy Requirement

Other Products / Services

Shackles

  • Categories Featured, Rigging Hardware
Capacities 13 thru 55 metric tons o Forged Quenched and Tempered, with alloy pins.
Working Load Limit permanently shown on every shackle
Hot Dip galvanized or Self Colored.
Fatigue rated.
Shackles 25t and larger are RFID EQUIPPED.
Shackles can be furnished proof tested.
With certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Charges for proof testing and certification available when requested at the time of order.
Shackles are QuenchedTempered and can meet DNV impact requirements of 42 joules at -20 C.
Crosby products meet or exceed all requirements of ASME B30.26
including identification, ductility, design factor, proof load and temperature requirements.
Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME 830.26.
Look for the Red Pin the mark of genuine Crosby quality.
View Complete Details

Nylon Web Sling

  • Category Slings
Nylon web slings are made for daily use under good to moderate lifting conditions. Nylon stretches more to help avoid shock loading.

Our synthetic web products measure up.
Our synthetic web products dont merely meet our own strict standards for workmanship and performance. They also meet or exceed these military and federal specifications:
ANSI Standard Z1.8 specifications of general requirements for a quality program.
MIL-Standard-105 sampling procedures and tables for inspection by attributes.
MIL-W-4088F military specification for textile webbing woven nylon.
MIL-W-23223A military specification for slotted nylon webbing.
Fed. Spec. VT-285-E federal specification for polyester thread.
Fed. Spec. VT-295-E federal specification for nylon thread.
View Complete Details

Absorbent Booms

Oil-Dri Premium absorbent clay granules are used to absorb most types of oils, mixtures of soluble oils, acids, paints, inks, water and other liquid spills. Proper use of this product can reduce slipping accidents, prevent flash oil fires and keep floors clean and dry.

Specifications
Material: Polypropylene
Length sizes: 10 and 18
Diameter sizes: 5 and 8
Fluids Absorbed : Oil Only Petroleum
View Complete Details

Air Tugger Rentals

We are adding new equipment for rental on an on-going basis, so if you dont see exactly what youre looking for, call us to discuss your particular needs.

Air Tuggers up to 10, 000 lbs.
View Complete Details

Block Rentals

Blocks available:

90 tons
50 ton
40 ton
20 ton
We are adding new equipment for rental on an on-going basis, so if you dont see exactly what youre looking for, call us to discuss your particular needs.
View Complete Details

Clips

Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it.

Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 18 78 sizes, and 90% for sizes 1 through 3-12.
Entire Clip is Galvanized to resist corrosive and rusting action.
Sizes 18 through 2-12 and 3 have forged bases.
All Clips are individually bagged or tagged with proper application instructions and warning information.
Clip sizes up through 1-12 have rolled threads.
Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Look for the Red-U-Bolt, your assurance of Genuine Crosby Clips.
View Complete Details

High Performance Marine Cordage

  • Category Cordage / Rope
We offer Samson, a product that delivers unsurpassed quality in high-performance cordage for diverse applications. Lightweight, low stretch, and made to last.
View Complete Details

Dock Hardware

  • Category Galvanized Marine Hardware
Dock hardware from Virginia Fasteners.

T plates
Angle washer plates
Outsideinside corner plates
Pile guides
Pile rollers
Cleats
View Complete Details

Sheaves

  • Category Rigging Hardware
We offer a finely designed range of McKissick Sheaves, which are known for their uniformity. These sheaves are designed to increase life of wire ropes, with which they are used in the industries. Best quality raw material is used to create McKissick Sheave range that performs excellently under the heavy duty industrial applications. Customized range of industrial elements is designed to meet requirements from multiple industries.
View Complete Details

Absorbent Pads

Oil-Dri Premium absorbent clay granules are used to absorb most types of oils, mixtures of soluble oils, acids, paints, inks, water and other liquid spills. Proper use of this product can reduce slipping accidents, prevent flash oil fires and keep floors clean and dry.

Specifications
15 x 19 Inch heavy weight hydrophobic pads repel water while absorbing petroleum based fluids. Double sided coverstock offers extra durability, and bonding allows fluid to spread through the material quicker for the best absorption rate. Ideal for automotive, industrial, and marine applications. 100box absorbs up to 26 gallons.

Number Of Pads: 100
Pad Dimensions (In.): 15 X 19 Inch
View Complete Details

Air Hoists

We offer Harrington Hoists, a leading supplier of electric chain and wire rope hoists, air powered hoists, lever hoists, manual hand chain hoists, trolleys, cranes and crane components.

Air Chain HoistsTrolleys
TCR Large Capacity Air Chain Hoists
TCS Air Powered Hoists
AH Air Chain Hoists
TCR Air Chain Hoists
AL Lube FreeSpark Resistant Air Chain Hoists
AW Wash DownSpark Resistant Air Chain Hoists
AS Spark Resistant Air Chain Hoists
View Complete Details

Crosby Blocks

The Crosby Group has been manufacturing products such as hooks, swivels, shackles and blocks since 1956, setting the industry standard for quality. Click the images below to see the full list of Crosby Blocks, as well as their sizes and specifications.

View Complete Details

Lanyards

  • Category Fall Protection
Fall Safe lanyards are available in a variety of materials from kernmantel rope, webbing to elasticated webbing. They come with or without an energy absorber and the connectors configuration can be adjusted by the user for best performance.
View Complete Details

Electric Hoists

  • Categories Featured, Hoists
Harringtons (N)ER enhanced features three phase electric chain hoists are equipped with the latest technology in the market today. All models include a low headroom, lightweight body with a fan-cooled motor, standard thermal motor protection and a count hour meter for preventive maintenance. A secondary mechanical load brake is an additional features on ER models only. Simply the best hoists on the market!

(N)ER capacities 18 Ton through 5 Ton
(N)ER capacities 8 Ton through 20 Ton see (N)ER large capacity section for details
Smart Limit option is available on NER capacities 18 through 5 Ton
60 minute, H4 rated motor for the most demanding applications
The Guardian Smart Brake Technology revolutionary DC current motor brake with electrical failsafe design and 10 year warranty
Adjustable dual speed via under-the-cover variable frequency drive
All standard models are UL listed to UL 1340 Standard for Hoists
Completely sealed body suitable for harsh indoor or outdoor environments- IP55 rated
Plug in pendant and power supply cords save time on set up and maintenance
Super strength, nickel-plated load chain is corrosion and wear resistant
5 or 6 pocket load sheave improves chain life and promotes smooth lifting
View Complete Details

Hoist Hooks

  • Category Rigging Hardware

The Crosby Group has been manufacturing products such as hooks, swivels, shackles and blocks since 1956, setting the industry standard for quality.

View Complete Details

Plate Clamps

  • Categories Featured, Rigging Hardware
For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loading
Welded alloy steel body for strength
Forged alloy components where it matters most
Individually proof-tested at 2 times the Working Load Limit with certificationserial number and test date stamped into body
Full 180 turning range for material transfer, turning or moving
Latch locks clamp either open or closed
Repair kits available
RFID equipped for complete, modern traceability
View Complete Details

Turnbuckles

  • Category Rigging Hardware
  • SERIES HG-223 Hook & Hook Turnbuckles
We carry Crosbys full product listing of assemblies and components of turnbuckles and similar products.

Turnbuckle assembly combinations include:

HG-223 Hook & Hook Turnbuckles
HG-225 Hook & Eye Turnbuckles
HG-226 Eye & Eye Turnbuckles
HG-227 Jaw & Eye Turnbuckles
HG-228 Jaw & Jaw Turnbuckles
View Complete Details

Wire Rope Sling

  • Category Slings
  • temperatures 200° F
Conditions such as the following should be sufficient reason for consideration of sling replacement:

For strand laid and single part slings, ten (10) randomly distributed broken wires in one rope lay, or five (5) broken wires in one strand in one rope lay.
For cable laid and braided slings of less than 8 parts, twenty (20) randomly distributed broken wires in one lay or braid, or on (1) broken strand per sling.
For braided slings of 8 parts or more, forty (40) randomly distributed broken wires in one braid, or two (2) broken strands per sling.
Severe localized abrasion or scraping.
Kinking, crushing, birdcaging or any other damage resulting in distortion of the wire rope structure.
Evidence of heat damage or if a wire rope sling having a fiber core is exposed to temperatures in excess of 200 F. or if a wire rope sling having a steel core is used at temperatures above 400 F or below minus 60 F.
End attachments that are cracked, deformed, or worn.
Deformationany visibly apparent bend or twist from the plane of the unbent hook. Throat openingany distortion causing an increase in throat opening of 5% not to exceed imin. (6mm) (or as recommended by the manufacturer)
Corrosion of the rope or end attachments.
Unlaying or opening up of a tucked splice.
View Complete Details

Wire Rope Cutter

  • Length 18” (457 mm)
  • Maximum Cable Cutting Capacity: 9/32” (7 mm) wire rope and cables
Klein Tools Wire Rope Cutter features shear type blades for square, clean cuts. Forged from USA steel. Non-slip vinyl grips provide a secure hold when the tool is in use. Hinge bolt with pin-set nut provides proper blade tension. Tool cuts wires up to 932 (7mm)) and Stoffel container seals.

Shear type blades for square, clean cuts.
All forged construction; USA Steel.
Non-slip vinyl grips.
Hinge bolt with pin-set nut for proper blade tension.
Cuts wire up to 932 (7 mm) and Stoffel container seals.
View Complete Details

General Purpose Wire Rope

  • Category Wire Rope
High Quality six strand rope
High Strength confirmed by Bridons Powercheck testing of a sample
Excellent resistance to wear.
Fully Lubricated.
Steel Core, Fibre Core.
View Complete Details

High Performance Wire Rope

  • SERIES Dyform 18
Rigorous checks during manufacture ensures Bridon only produces premium quality ropes. Breaking load tests on all our ropes gives ultimate assurance that specifications have been met or exceeded.

High breaking force
Rotation resistant
Reduced sheave wear
Long service life
Reduced downtime
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Charlestons Rigging & Marine Hardware)
  • Charleston, SC 29405, United States
  • Share us via