Chase Filters And Components, LLC

- Flows up to 25 GPM (Return) 9 GPM (Suction) - 250 PSI Max. Operating - Up to +250° F. Operating - Petroleum based fluids only.

13-Series filters consist of two or more spin-on filter head modules bolted together to form a complete assembly. Inlet flow is equally divided among all spin-on filter elements (parallel flow). Multiple filter head module design allows filter elements to be manifolded together creating greater flow capacities and longer service life.

Flows up to 2.5 GPM 17-4PH Stainless Steel Construction A Wide Range of Micron Ratings Available 14" and 38" HP Ports Liquid Applications Only. Call Factory for Pnuematic Applications

CFC Filter Discs, made from 316 Stainless Steel, are ideal for areas where space is at a premium and a standard filter cannot be used. Typical placement for the discs are in front of regulators, valves, gauges, or any piece of high sensitive equipment. The pleated design offers greater surface area, which limits pressure drop while also increasing dirt holding capacity. CFC uses support mesh on both sides to offer greater support in any flow condition.

Available in Aluminum (5K), 304 Stainless (6K) and 316 Stainless (6K) Flows up to 2.5 GPM o 60 SCFM Port Sizes Available in 18", 14" and 38" 304 Stainless Steel Pleated Disc Various Micro Ratings Available from 2 to 300 Micron Ideal for Applications with Limited Space Economical Filtersfor Test Stands, Meters, Gauges, Relief Valves and Both Hydraulic & Pneumatic Systems

All 14 Series models suitable for use with petroleum base oils, fire resistant hydraulic fluids, coolants and lubricants. All Chase Series tank filters have a reverse taper on the outside wall of the end caps. The ensures a positive interlock with the epoxy inside, thus preventing bond failure in rough terrain vehicle applications.