Our Products #4817500

These anchors can be installed either manually or with power driven equipment. Manual installation is accomplished by inserting a bar through the eye and screwing the anchor down. Installations with portable or vehicle mounted equipment is accomplished by means of adapters. The eye dimensions are the same as shown on the Threaded Forged-Eye Anchor Rods.

For Joining Split Duct Conduit to Split Duct Conduit.

CRSs SPLIT COUPLINGS are specifically designed to connect CRSs Split Duct Conduit to CRSs Split Duct Conduit. Use of SPLIT COUPLINGS makes laying lines quick and easy.

The SPLIT COUPLINGS are manufactured from a compound specifically designed for power and communications applications. In addition, the SPLIT COUPLINGS along with CRSs Split Duct have superior strength and ultraviolet resistance.

The unique interlocking design gives the SPLIT

SCH 40 Fittings can often be used with SCH80 pipe and bends. Please consult with your Colonial Teltek Sales Professional.

Additional specifications available.

To order SCH80 Fittings Call Colonial Teltek 610-312-8100.

For enclosing fiber optics and cables, installing conduit around existing cable, or repairing sections of damaged conduit. CRSs SPLIT DUCT CONDUIT is an innovative and efficient product that is great for enclosing fiber optics, cables, and repairing damaged conduit.

When snapped together, the unique interlocking design of SPLIT DUCT CONDUIT creates a smooth tight seal protecting the cable or fiber optics from weathering. No tape, plastic, or metallic straps are needed to seal or provide extra

GS Industries underground spacers withstand rough handling and heavy loading, and resist chemicals such as aqueous acids, alkalis, salts and mineral oil. Theyre serviceable over a wide temperature range. The spacers are molded of high impact polystyrene plastic for uniformity and structural integrity. Theyre manufactured to withstand the normal pressures of poured concrete. The spacers have low installation cost, minimum handling and storage; and fast simple assembly that reduces labor costs.

SCH40 Conduit is commonly used for underground telecom applications, encased in concrete or direct burial. Also for use in exposed or concealed applications above ground.

SCH40 Conduit is produced to the following standards
Underwriters Laboratory, Inc. (UL) - UL 651
National Electrical Manufacturers Association (NEMA) - TC-2
National Electrical Manufacturers Association (NEMA) - TC-18

Type DB-60 (Direct Burial) TC-6 Conduit is manufactured for direct burial applications.
Type EB-20 (Encased Burial) TC-6 Conduit is manufactured for use in outside concrete encasement applications.

Type DB-60 Conduit is produced to the following standards
National Electrical Manufacturers Association (NEMA) - TC-6
American Society for Testing and Materials (ASTM) - F-512

Type EB-20 Conduit is produced to the following standards
Underwriters Laboratory, Inc. (UL) - 651-A
National

SCH 40 Fittings can often be used with SCH80 pipe and bends. Please consult with your Colonial Teltek Sales Professional.

Additional specifications available.

To order SCH80 Fittings Call Colonial Teltek 610-312-8100.

The multi-blade, one-piece top plated expands upon impact into undisturbed earth to form a cone shaped square, which distributes the anchors holding power over a wide area, building up compression against an inverted pyramid of earth. The expanding anchor retains its shape under extremely heavy loads because the base plate supports the blades in the middle, distributing the load uniformly over the blades. Reinforcing ribs provide additional strength.

Zinc coated guy or messenger strand and wire is produced to comply with applicable ASTM Specifications A-475, A-363 and A-111 in Class A, Class B and Class C coating weight.

GS Industries underground spacers withstand rough handling and heavy loading, and resist chemicals such as aqueous acids, alkalis, salts and mineral oil. Theyre serviceable over a wide temperature range. The spacers are molded of high impact polystyrene plastic for uniformity and structural integrity. Theyre manufactured to withstand the normal pressures of poured concrete. The spacers have low installation cost, minimum handling and storage; and fast simple assembly that reduces labor costs.