Our Products #5232917

In 1997, we created a no tie down strap, self clinging design which revolutionized the way a mooring cover looks and feels. It incorporates our patented Vacu-Hold System, eliminating the need for any tie down straps and is a model-specific cover that protects the boat in any situation or form of transportation. It is uniquely designed to provide continuous UV, water and dirt protection, keeping the boat clean and dry.

MATERIAL
Sur Last BW+ Marine-Grade high performance solution dyed polyester specifically constructed for Mooring cover application
Longest lasting water repellency available
Lightweight for easy installation and storage
Self standing Anti-pooling System (APS) New carpet friendly pole foot
Dual 304 Stainless Steel Ratchet Tightening System
Custom towerarch collars to prevent water intrusion
New custom molded cleat doors
New molded fuel door
New molded ratchet boots full protection
Custom Graphics
Storage bag
FEATURES
Patented Vacu-Hold Strapless Trailering System eliminates billowing and buffeting, allowing the cover to travel conforming to the shape of the boat
1-person easy installation
Lightweight for easy storage when not in use
Anti-pooling System Keeps water from pooling on the cover
304 Stainless Steel Rachet Tightening System with protective boot cover
Custom molded cheat reinforcements
Custom Sewn Tower, Bimini or Arch Opening w Collar
Zipper fueld cap opening
Storage bag
Custom multi-color graphics

Cockpit covers in conjunction with bow covers have been the protective cover of choice for years. These covers use the same Sur Last fabric that is both water resistant and UV resistant. Typically factory installed, these covers are an alternative to the mooring cover that we offer.

This is a lean initiative type product for OEM manufacturing with additional benefits. It is installed quickly over boats and other forms of transport covers and can be removed and reinstalled without any compromise. It is very versatile and can be given to the consumer as a winter storage cover.

MATERIAL
Non-abrasive 6.5 oz. polyethylene coated needle felt Polypropylene
FEATURES
Specific Model Fit
1-Man easy installation cuts boat cover install time down to 8 to 12 minutes (No heat shrinking or bubble wrap required)
Eliminates the use of an open flame in the factory
Eliminates warranty claims for damaged interiors or gel coat
Easy install Anti-pooling and twin 200# Ratchet Webbing System
Patented Vacu-Hold Strapless Trailering System eliminates billowing and buffeting. Cover travels conforming to the shape of the boat.
Trailerable forwardbackward up to a 20 degree angle
Waterproof welded seams
Completely reusable, allowing for easy reopening of the boat if needed
Cover can be completely removed for dealer boat inspection and easily reinstalled for proper storage. Eliminates last minute claims for replacement parts etc.
Can be given to the retail customer for off season storage

Outer Armor Built by Commercial Sewing is the OEM provider of covers and accessories for many of the Powersport Manufacturers. Our covers are custom fit to each model which provides an attractive look and minimizes billowing and buffeting while trailering. This extends the life of the cover and minimizes any marking on finished surfaces.

Commercial Sewing has co-developed our fabrics with major mills and finishing factories to provide the best materials available. Our Sur Last and Army Duck fabrics provide superior UV protection to minimize fading and retain high water repellency to protect the snowmobile.

We provide custom screen printing in house to enhance the look of the covers. Commercial Sewing also designs, develops and builds many accessories such as storage bags, goggle holders, knee pads and others accessories to make your snowmobile adventure even more enjoyable. These accessories are custom fit to your model and installation is quick and easy.

Outer Armor cover are strapless, custom fit trailerable covers utilizing the patented Vacu-Hold design. This system creates a pressure differential between the cover and personal watercraft (PWC) which draws the cover tight and eliminates billowing and buffeting. This increases the life of the cover and protects the paint finish on the PWC.

Our covers are made from Sur Last fabric with model specific screen printing to create a cover that not only protects, but also looks good.

We are the OEM provider for most of the OEM companies.

Our innovative designs provide broad coverage with ease of use. These biminis are model specific to fit the deck, tower, or arch mounted styles made of aluminum or stainless steel with similar material of plastic hardware depending on requirements. We have patented two new styles; a slide to stow for forward leaning towersarches and bi-fold to stow for rear leaning towersarches.

Being a fully capable CAD design house means we can design & create special hardware or any part required to achieve unique designs.

MATERIAL
Sunbrella
Sur Last
Series 70 Sur Last
BIMINI CONSTRUCTION
78 aluminum tubing
1 and 78 stainless steel tubing
1 14 square aluminum tubing
Custom multi-color graphics
Stainless or plastic hardware
Unique designed patented hardware
TYPES
Spor & Pontoon Standard
3-4 bow top unique design tower versions
Extensions

We manufacture both a TransportShipping & Styled (finished) version of this cover.

The transportshipping version is for protection during boat manufacturing & shipping to dealers for rigged boats. This separate motor cover allows the transportshipping cover for the boat to be easier to design and install. It can also be used by the consumer for off-season storage.

The styled version is meant to be a finished product (accessory) that compliments the mooring cover. It protects the cowling from abuse during towing and environmental damage. Being separate from the mooring cover allows for each to be a simpler design and not dependent on each other so if a motor change were desired the mooring cover would not be affected.

In addition to our main marine products we also provide other miscellaneous products like soft cooler & document bags or any sewn product needed for production.

MISC
Mesh Pockets
Head Organizer
Shower Curtain
Bow Tents
Table Storage Bag

Outer Armor Built by Commercial Sewing is the OEM provider of ATV custom fit covers and accessories. Our covers are designed to be durable and attractive while at the same time keeping your ATV protected from the elements.

We also design and make many custom fit bags and accessories to allow more capacity for carrying and protecting your belongings while out on the trail.

We offer innovative soft cab enclosures, covers, storage bags and other accessories. We are always working on new designs and fabric options so we can provide the best performing cabs on the market. These cabs are designed to be bolt on, easy to install and do not require any special tools. Our cabs have windows that can be opened and doors that remove easily when the weather is hot.

Our covers are a custom fit design for storage and for trailering to help protect your investment.

Our bags and accessories provide additional carrying capacity and keep your items protected from the weather.