Post Buy Requirement
CM
United States
Add Review

Our Products

Lecarra Mark 9 Double Slot Steering Wheel

The Mark 9 is made out of one piece billet 6061 T-6 aluminum. The frame is cut out as one piece so there are no welds or crimps of the spokes at the rim. Each steering wheel is made here in the U.S.A. This makes a nice custom addition to your boat! Each wheel requires an adapter for your steering system type.

Diameter: 14"
# of Spokes: 4
Finish: Polished
Leather Color: Black
Manufacturer: Lecarra
View Complete Details

Bearing Seal Type Stuffing Box

Made from 6061-T6 aluminum with a machined finish. They are approximately 2 12" diameter by 2 12" long. There is a lightly pressed in 2" diameter double sealed bearing with the inside diameter bored to 1.002" (to easily slip over your prop shaft). Its held in the aluminum housing by a snap ring for safety.

Inside the aluminum housing is a double lip cup seal to keep the water out and a grease zerk on the outside body to grease the seal. A standard size 1 34" hose fits from the rear, Also added rounded grooves to help the hose clamp bite into the housing and not slip off.
With this design there will be no more prop shaft wear of bushings to replace because it rides on a bearing!
View Complete Details

Heavy Duty V-Drive Steel Prop Puller

his welded steel prop puller is one of the finest prop pullers made.

Will accommodate 1" and 1 - 18" Prop Shafts

Just tighten onto prop, then smack the back side with your mallet hammer!
View Complete Details

Cavitation Control Handle

9 position deluxe cavitation control handle. Used to adjust your cavitation plates

Material: Aluminum & Stainless Steel
Finish: Polished
Quantity: sold individually
View Complete Details

Dan Olson Racing Products

Dan Olson Block Mounted Engine Oil Cooler for the Chevrolet Big Block Mark IV Engine
There is no simpler way to cool the engine oil in your Big Block Chevy!


Overall Length: 19-34"
Diameter: 5"
Finnish: Polished
Case Material: Aluminum
Core Material: Copper
View Complete Details

Oil Cooler Intermediate Housing

Intermediate Housing for the Dan Olson Oil Cooler

Fits between the block adapter and the oil cooler. These corrode over time and need to be replaced

Finish: Raw Casting

.
View Complete Details

O-Ring Kit

This is a six piece gasket and Teflon O-Ring set for the Berkeley Jet Pump

Set includes:
(1) Bearing Cap Gasket
(1) Bowl Gasket
(1) Suction to Intake Gasket
(1) Nozzle Housing Gasket
(1) Nozzle Teflon O-Ring -250
(1) Nozzle Teflon O-Ring -352
View Complete Details

Lecarra 3 Steering Wheel Adapter

Steering Wheel Adapter for the Lecarra 9 bolt Steering Wheel
CNC from 6061-T6 Billet Aluminum
Only fits the Lecarra Steering Wheel
Will Fit Morse, Teleflex, and Uflex steering systems with the 34" taper
Comes in raw machined finish - Great if you want to powder coat, Or polished finish

Two Piece Construction
9-bolt circumference: 4.035
Length: 3"
Material: Billet Aluminum
View Complete Details

Big Block Chevrolet Square Port Exhaust Manifold Gaskets

Big Block Chevrolet Square Port Exhaust Manifold Gaskets
HTX-900 is a composite gasket structure consisting of graphite-coated, high-temperature facing material chemically and mechanically fused to an expanded steel core. It is intended for exhaust manifold, header, collector, and EGR system gaskets, as well as other industrial sealing applications that require high strength, thermal integrity, and anti-stick performance.

Port Size: 1-78" SQ.
Material: HTX-900
Quantity: Sold in Pairs
View Complete Details

94 Amp Single Wire Chromed Marine Alternator

New chrome marine alternator.

USCG Approved.
12 Volt, self-exciting one wire hook up with a negative ground.
A great addition to any engine!
94 Amp
View Complete Details

Berkeley Jet Drive Gasket

This is a six piece gasket and Teflon O-Ring set for the Berkeley Jet Pump

Set includes:
(1) Bearing Cap Gasket
(1) Bowl Gasket
(1) Suction to Intake Gasket
(1) Nozzle Housing Gasket
(1) Nozzle Teflon O-Ring -250
(1) Nozzle Teflon O-Ring -352
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Connolly Marine)
  • Lake Havasu City, AZ 86403 map, United States
  • Share us via