Leading Manufacturer, Supplier & Retailer of REEVES Flexible Stretcher, CMC RESCUE Access Pulley Kit, PARATECH LONG SHORE, Structural Fire Boot and TEAM Hazmat Response Tool.
Designed as an easily-conveyable patient transport device, the Reeves 101 Flexible Stretcher can carry in excess of 700 lbs (per independent laboratory testing), but is constructed of lightweight 18 oz. vinyl-coated polyester that is easily washed with soap and water. It is also highly resistant to acids and alkali, and unable to be penetrated by liquids. Five (5) removable hardwood slats positioned between two (2) layers of fabric provide strength and rigidity. Six (6) ergonomically-placed handles, constructed of polyproylene webbing with foam inserts are both comfortable and smart. Three (3) polypropylene web patient security straps are placed in strategic locations to provide maximum immobilization. Reflexite reflectors on both sides provide for maximum visibility.
The CMC Access Pulley Kit features our new ProTech Access Pulley, a compact version of our very popular CMC ProSeries CSR Pulley. Rigged with 716 in. CMC Static-Pro rope, the Access kit is an excellent choice for industrial work applications as well as many rescue operations. Kit includes: 200 ft. 716 in. CMC Rescue Static-Pro Lifeline, Blue* 1 CMC ProTech Access Pulley* CMC ProTech Access Double Pulley* 2 CMC ProSeries Manual-Lock Carabiners, slate* 1 CMC Rescue #2 Rope Bag, Yellow The Access Pulley and Access Double Pulley are UL Classified to NFPA 1983 – General Use.
The Acme Thread Long Shore System consists of five sizes of extendable Long Shores ranging from 35.5 in (90.2 cm) to 198 in (503 cm) Each Long Shore consists of a 3-12 in (8.9 cm) aluminum alloy tube with a 3 in (7.6 cm) aluminum alloy threaded shaft that can be extended manually or activated by air, carbon dioxide or nitrogen. The Acme Thread Long Shore allows soft placement at collapse incidents and can be safely secured with a minimum of shock to the load. All aluminum alloy components of the Long Shore System are hard anodized to reduce electrical conductivity and increase strength and wearability.
The 14" Pull-On Structural Fire Boot is equipped with Firestorm Leather, and a Full Height Crosstech Bootie for performance unmatched by any other waterproof, breathable barrier. A few features include Reinforced pull-straps, KevlarNomex Protective Shield, Lightweight Composite 3D Molded Shin Guard, Lightweight Composite Safety Toe and Shank, Nitrile Rubber Toe Cap, 3M Scotchlite Material, Contour Cement Construction Outsole, Lenzi Punture Protection in Sole. This boot also meets the newest revision, NFPA1971-2007 edition. Available in Med- Wide-X-Wide widths NFPA 1971 (Structural Fire Fighting) and NFPA 1992 (Liquid Splash) compliant. FIRESTORM™ Leather Heavyweight, flame-resistant and waterproof leather for durable performance. Leather has added reflective material at the heel for added nighttime visibility. Specially softened tumbled leather in high flex areas to move with you. CROSSTECH® Footwear Fabric A full-height bootie liner made from a package of Cambrelle®, 300g insulation, and CROSSTECH® moisture barrier provides protection unmatched by an other waterproof, breathable barrier. 3M SCOTCHLITE™ Reflective Material Flame-resistant fluorescent and reflective material for added visibility. HEELPORT™ Internal Fit System Anatomical HEELPORT™ foam insert holds your heel securely so it won’t slip while cushioning your ankle. Molded Heel Counter A rugged heel counter is individually molded to fit each size perfectly. LENZI® Puncture Protection High-performance composite penetration-resistant insole is made from multiple layers of HT ceramic material - like ballistic armor for your feet. Far more flexible than a steel plate and doesn’t transmit heat or cold. Exceeds NFPA standards for safety.
The TM-51 HAZMAT RESPONSE TOOL KIT consists of 17 spark resistant, non-magnetic, corrosion-resistant hand tools in a non-metallic container. The container, a 5 gallon polyurethane bucket, features a screw-on lid which can isolate contaminates until the bucket and tools can be properly cleaned. A removable divider keeps tools upright for easy handling. Hazmat tools are: Non-Sparking: For use in hazardous environments where flammable or combustible vapors, liquids, dusts or residues are present. Non-Magnetic: For use near sensitive magnetic equipment and in clean room environments. These hazmat tools have been tested and meet U.S. Government and industry non-magnetic standards for use in these environments.
Designed to tackle one of the big challenges in trench collapse rescue. The Trench Cushion Kit includes the equipment you need to quickly and safely support your shoring panels. With our proven trench bag system you can significantly reduce the time needed to backfill your shoring panels and maintain a vertical surface for support. The Trench Cushion Kit includes two low pressure square cushions with a 3.25 ton (3 M ton) capacity that can fill up to an 18" (46 cm) void. Each cushion is fitted with o-ring harnesses for ease in lowering into the trench and a yellow centering cross to help in positioning the cushions along the sides of the trench wall. The kit is completed with two single cushion controllers, 1" X 20' (2, 54 cm X 66, 1 m) red and blue connecting hoses, and a 38" X 16' (0, 95 cm X 4, 8 m) high pressure hose.
ESS Modular Technology™ allows all lenses to be quickly and inexpensively interchanged. ICE Eyeshield replacement lenses are available in Clear, Smoke Gray, Rose Copper, and Hi-Def Yellow. Extra-thick, 2.4mm polycarbonate high-impact lenses (Clear, Smoke Gray, & Hi-Def Yellow). Polarized lenses available Lenses feature ESS ToughZone FC™ anti-scratch lens coatings Lenses are highly impact resistant, and exceed ANSI Z87.I-2003+ and the U.S. Military's .15 caliber ballistic impact test MIL-PRF-31013 High level of anti-fragmentation protection that can stop a shotgun blast from a distance of 10 meters ESS Modular Technology allows all lenses to be quickly and inexpensively interchanged All lenses provide 100% UVAUVB protection & precise optical clarity for distortion-free vision ESS polarized lenses do not offer the same level of impact protection as non-polarized lenses. Although these lenses exceed all ANSI Z80.3 requirements, polarized products WILL NOT protect against all impacts nor will they protect against all chemical splashes.
Paratech's Elevator Support Unit (ESU) safely stabilizes an elevator and prevents it from moving. When deployed, the ESU causes zero to minimal damage to elevator cars and affords rescue teams precious time to extricate passengers and save lives. Two unique Rescue Strut base and end plates form the core components of this system. An Angled Rubber Base attaches to either Rescue Strut and grips the floor, while the Elevator Support Arm attaches to the top of the Rescue Strut and hooks under the elevator car.
ESS ESS Anti-Reflective Stealth Goggle Cover Sleeve, Desert Tan- Protect Your Goggles ESS's anti-reflective SpeedSleeve™ eliminates lens glint and keeps the goggle and lenses clean and scratch-free when not being worn.
Plastic stretcher made of yellow high density polyethylene shell, supported by a stainless steel outer rail permanently attached with stainless steel semi-tubular rivets. Features molded runners, fully exposed outer rail, non-absorbent foam pad secured to stretcher and four patient restraint straps. Ideal for unusually rugged rescue situations such as industrial, mining or construction. Weight 31 lbs. (14kg). Made in U.S.A.