Post Buy Requirement
CB
United States
Add Review

Our Products

Double Door Hinge Cover

Application:
Designed for use in control and instrumentation applications in areas which do not require oil-tight and dust-tight specifications.
Construction:
14 gauge, or 12 gauge steel.
Continuous hinges on doors.
Free standing.
T-Handle 3-pt. Keylock.
Collar studs provided for mounting optional panel.
Finish:
ANSI 61 gray polyester powder finish inside and out over phosphatized surfaces.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 1
Conforms to NEMA standard Type 1
View Complete Details

Raintight - Wiring Trough

Application:
Designed to protect wiring in outdoor installations against rain, sleet and snow, or indoors against dripping water.
Construction:
16 gauge, 14 gauge, or 12 gauge galvanized steel.
Drip shield top and seam-free sides, front and back.
Slip-on rmovable cover fastened with plated steel screws along bottom edge.
Door handles on larger untis.
No gasketing.
Finish:
ANSI 61 gray polyester powder finish inside and out over galvanized steel.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 3R
Conforms to NEMA standard Type 3R
View Complete Details

Wiring Through - Stainless Steel

Application:
Designed to protect electrical wiring in areas which may be regularly hosed down in highly corrosive areas.
Construction:
16 gauge or 14 gauge stainless steel Type 304.
Seams continuously welded and ground smooth, no holes or knockouts.
Welded ends.
Flanged cover.
Stainless steel cover screws thread into flange outside of gasket line to prevent leakage through cover screw holes.
Stainless steel sealing washers attached to each cover screw.
Oil-resistant gasket.
External mounting feet.
Finish:
Brushed.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 4X
Conforms to NEMA standard Type 4X
View Complete Details

Wiring Through - Stainless

  • Model Number 316
Application:
Designed to protect electrical wiring in areas which may be regularly hosed down in highly corrosive areas.
Construction:
16 gauge or 14 gauge stainless steel Type 316L.
Seams continuously welded and ground smooth, no holes or knockouts.
Welded ends.
Flanged cover.
Stainless steel cover screws thread into flange outside of gasket line to prevent leakage through cover screw holes.
Stainless steel sealing washers attached to each cover screw.
Oil-resistant gasket.
External mounting feet.
Finish:
Brushed.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 4X
Conforms to NEMA standard Type 4X
View Complete Details

Wireway - Aluminum

Application:
Designed to protect electrical wiring in areas which may be regularly hosed down or are otherwise very wet and also in areas where serious corrosion problems exist.
Construction:
14 gauge (.080) aluminum (5052-H32).
10 gauge (.125) aluminum end flanges.
Seams continuously welded and ground smooth, no holes or knockouts.
Smooth, rounded edges on all sections and fittings prevent damage to insulation.
Mounting channels welded horizontally to interior body sides at top, bottom, and center.
Aluminum continuous hinge.
Stainless steel external screw clamps assure complete seal between covers and bodies.
Screw clamps are quick and easy to operate.
Oil-resistant gasket.
Oil-resistant gasket positioned between flanges when sections and fittings are bolted together.
A complete selection of fittings are available.
Finish:
Brushed.
Industry Standards:
ETL Listed
Conforms to UL 870 Type 4X
Conforms to NEMA standard Type 4X
View Complete Details

Telephone Cabinet - Flush

Application:
Designed for use as wiring boxes, junction boxes, pull boxes, telephone and communication cable termination or switch enclosure.
Construction:
16 gauge, 14 gauge, or 12 gauge steel.
Flush mounting.
Continuous hinge on door.
Flush frames extend 1" beyond each of all four sides of the body.
Cylinder keylock CAT 60.
Cupped washers and bright finish oval head screws used to protect trim cover finish and improve appearance.
Collar studs provided for mounting optional panel.
Finish:
ANSI 61 gray polyester powder finish inside and out over phosphatized surfaces.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 1
Conforms to NEMA standard Type 1
View Complete Details

Raintight Screw Cover

Application:
Designed to extend the depth of a Type 3 - Screw Cover enclosure. Protects against wind blown dust, rain, sleet, and external ice formation.
Construction:
16 gauge, 14 gauge, or 12 gauge steel or galvanized steel.
Open front and back with flange-in.
Bolt to existing Type 3 - Screw Cover enclosure.
Use enclosures existing cover.
Neoprene gasketing is attached to the back flange of the extension box.
No holes or knockouts.
Finish:
ANSI 61 gray polyester powder finish inside and out over phosphatized surfaces or galvanized steel.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 3
Conforms to NEMA standard Type 3
View Complete Details

Watertight - Clamp Cover - Aluminum

Application:
Intended for use as electrical junction boxes, terminal wiring boxes, and instrument housings. Designed to provide protection from dust, dirt, oil, or hose directed water in highly corrosive environments.
Construction:
14 gauge (.080) aluminum (5052-H32).
Seams continuously welded and ground smooth, no holes or knockouts.
Stainless steel clamps on four sides of cover for watertight seal.
Lift-off cover.
Oil-resistant gasket.
Weldnuts provided for mounting optional panel.
External mounting feet.
Finish:
Brushed.
Optional panels are white or aluminum.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 4X
Conforms to NEMA standard Type 4X
View Complete Details

Screw Cover - Open Bottom

Application:
Designed for use as junction and pull boxes. Protects against contact with enclosed equipment.
Construction:
16 gauge, 14 gauge, or 12 gauge steel or galvanized steel.
Flat, removable cover fastened with plated steel screws.
Open bottom with flange-in.
Finish:
ANSI 61 gray polyester powder finish inside and out over phosphatized surfaces or galvanized steel.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 1
Conforms to NEMA standard Type 1
View Complete Details

Hinge Cover - JIC - Aluminum

Application:
Intended for use as electrical junction boxes, terminal wiring boxes, and instrument housings. Hinged doors provide convenient access. Designed to provide protection from dust, dirt, oil, and water.
Construction:
14 gauge (.080) aluminum (5052-H32).
Seams continuously welded and ground smooth, no holes or knockouts.
Aluminum continuous hinge.
Stainless steel clamps on 3 sides of cover for watertight seal.
Oil-resistant gasket.
External mounting feet.
Weldnuts provided for mounting optional panel.
Finish:
Brushed.
Optional panels are white or stainless steel.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 4X
Conforms to NEMA standard Type 4X
Conforms to JIC standard EGP-1-1967
View Complete Details

Watertight - Clamp Cover - Stainless

Application:
Intended for use as electrical junction boxes, terminal wiring boxes, and instrument housings. Designed to provide protection from dust, dirt, oil, or hose directed water in highly corrosive environments.
Construction:
16 gauge or 14 gauge stainless steel Type 316L.
Seams continuously welded and ground smooth, no holes or knockouts.
Stainless steel Type 316 clamps on four sides of cover for watertight seal.
Lift-off cover.
Oil-resistant gasket.
Weldnuts provided for mounting optional panel.
External mounting feet.
Finish:
Brushed.
Optional panels are white or aluminum.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 4X
Conforms to NEMA standard Type 4X
View Complete Details

Watertight - Hinge Cover - Stainless Steel

Application:
Intended to protect electrical and electronic controls, components, and instruments in wet highly corrosive environments that may require hose down.
Construction:
12 gauge stainless steel Type 304.
Seams continuously welded and ground smooth, no holes or knockouts.
Body stiffeners for added strength.
Removable centerpost.
Rolled lip around 3 sides of door and along top of enclosure.
Stainless steel continuous hinges.
Stainless steel door clamps on 3 sides of door for watertight seal,
Hasp and staple for padlocking.
12-inch floor stands are welded to enclosure.
Heavy duty lifting eyes.
Oil-resistant gasket.
Collar studs provided for mounting optional panel.
Finish:
Brushed.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 4X
Conforms to NEMA standard Type 4X
View Complete Details

- Watertight - Floor Mount - Stainless Steel

Application:
Intended to protect electrical and electronic controls, components, and instruments in wet highly corrosive environments that may require hose down.
Construction:
12 gauge stainless steel Type 304.
Seams continuously welded and ground smooth, no holes or knockouts.
Body stiffeners for added strength.
Removable centerpost.
Rolled lip around 3 sides of door and along top of enclosure opening.
Stainless steel continuous hinges.
Stainless steel clamps on 3 sides of cover for watertight seal.
Hasp and staple for padlocking.
12-inch floor stands are welded to enclosure.
Heavy duty lifting eyes.
Oil-resistant gasket.
Collar studs provided for mounting optional panel.
Finish:
Brushed.
Optional panels are white or aluminum.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 4X
Conforms to NEMA standard Type 4X
View Complete Details

Watertight - Floor Mount - Aluminum

Application:
Intended to protect electrical and electronic controls, components, and instruments in wet highly corrosive environments that may require hose down.
Construction:
12 gauge aluminum (5052-H32).
Seams continuously welded and ground smooth, no holes or knockouts.
Body stiffeners for added strength.
Removable centerpost.
Rolled lip around 3 sides of door and along top of enclosure opening.
Aluminum continuous hinges.
Stainless steel clamps on 3 sides of cover for watertight seal.
Hasp and staple for padlocking.
12-inch floor stands are welded to enclosure.
Heavy duty lifting eyes.
Oil-resistant gasket.
Collar studs provided for mounting optional panel.
Finish:
Brushed.
Optional panels are white or aluminum.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 4X
Conforms to NEMA standard Type 4X
View Complete Details

Weatherproof - Screw Cover

Application:
Designed for use as a wiring box, junction box, pull box, and terminal box. Protects against windblown dust, rain, sleet, and external ice formation.
Construction:
16 gauge, 14 gauge, 12 gauge, or 10 gauge steel.
All continuous welded seams are ground smooth.
Neoprene gasketing is attached to the inside of the cover.
Sealing washer attached to each cover screw on the outside of the cover.
No Mounting feet.
No knockouts.
Finish:
ANSI 61 gray polyester powder finish inside and out over phosphatized surfaces.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 3
Conforms to NEMA standard Type 3
View Complete Details

Raintight - Telephone Cabinet

Application:
Designed for use as a wiring box and junction box. Enclosure provides protection in outdoor installations against rain, sleet and snow, or indoors against dripping water.
Construction:
16 gauge, 14 gauge, or 12 gauge galvanized steel.
Drip shield top and seam-free sides, front and back.
Stainless steel continuous hinge on door.
T-handle keylock
No gasketing or knockouts.
Finish:
ANSI 61 gray polyester powder finish inside and out over galvanized steel.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 3R
Conforms to NEMA standard Type 3R
View Complete Details

Hinge Covers - Free Stand

Application:
Designed for use as a wiring box and junction box. Enclosure provides protection in outdoor installations against rain, sleet and snow, or indoors against dripping water.
Construction:
14 gauge, or 12 gauge galvanized steel.
Drip shield top and seam-free sides, front and back.
Stainless steel continuous hinge on door.
T-handle 3pt keylock
Gasketing along door openings.
No knockouts.
Finish:
ANSI 61 gray polyester powder finish inside and out over phosphatized surfaces.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 3R
Conforms to NEMA standard Type 3R
View Complete Details

Hinge Covers - T-Handle

Application:
Designed for use as a wiring box and junction box. Enclosure provides protection in outdoor installations against rain, sleet and snow, or indoors against dripping water.
Construction:
16 gauge, or 14 gauge galvanized steel.
Drip shield top and seam-free sides, front and back.
Stainless steel continuous hinge on door.
T-handle keylock
Optional latches available.
Gasketing along door opening.
No knockouts.
Finish:
ANSI 61 gray polyester powder finish inside and out over galvanized steel.
Industry Standards:
ETL Listed
Conforms to UL 50 Type 3R
Conforms to NEMA standard Type 3R
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Cross Brothers Inc.)
  • Los Angeles, CA 90040 map, United States
  • Share us via