Our Products #5141411

RISE cable penetrations have been the product of choice for shipyards around the world for almost 20 years. The system is comprised of just two simple components - rubber insert sleeves and FIWA Sealant, which provide the utmost in fire, water and gas protection. Installation is extremely simple: place a RISE Sleeve around each cable, fill the remaining space with RISE Filler Sleeves, then apply FIWA Sealant to both sides of the penetration - it's that easy!Features of RISE Cable Penetrations include: Compact installation - up to 50% more usable space than block systemsLabor savings - installs in a fraction of the time compared to block systemsWeight savings - weighs substantially less than comparable size block transitNo special transit frames requiredNo metal parts - no corrosionSeals with adhesion versus compression - safe for fiber optic cablesNo mineral wool in the system - protects against internal transit corrosionEasy re-entry for future cable changes - no need to replace materialProvides vibration absorption and sound dampeningEMC protection availableFire rated A-0 up to A-60, H-0 up to H-120, Jet FireWatertight up to 4-bar (60 psi)Shock & vibration tested for Navy approvalsAge tested to 50 year service life

RISENOFIRNO cable penetrations are the latest introduction to the CSDBeele family of passive fire safety products. Based on revolutionary new NOFIRNO technology, RISENOFIRNO offers ultimate flexibility for sealing cable penetrations. The system is comprised of just two simple components - rubber insert sleeves and NOFIRNO Sealant, which provide the utmost in fire, water and gas protection. Installation is extremely simple: place a RISE Sleeve around each cable, fill the remaining space with NOFIRNO Filler Sleeves, then apply NOFIRNO Sealant to both sides of the penetration - it's that easy!Features of RISENOFIRNO Cable Penetrations include: Compact installation - up to 50% more usable space than block systemsLabor savings - installs in a fraction of the time compared to block systemsWeight savings - weighs substantially less than comparable size block transitApproved for bundled cable sets - up to 25 LAN cables thru a single RISE SleeveNo special transit frames requiredNo metal parts - no corrosionSeals with adhesion versus compression - safe for fiber optic cablesNo mineral wool in the system - protects against internal transit corrosionEasy re-entry for future cable changes - no need to replace materialProvides vibration absorption and sound dampeningFire rated A-0 up to A-60, H-0 up to H-120, Jet FireWatertight up to 4-bar (60 psi)Age tested to 50 years - product works today and during entire service life of your installationRISE Extender Frame - doubles the usable space in any existing block transit

ACTIFOAM Temporary Seals for cable penetrations protect your installation while under construction or renovation. Fires can and do start during construction, before the cable transits can be packed. If the cables ignite, fire can spread rapidly throughout your vessel or rig, often with devastating consequences. ACTIFOAM Temporary Seals prevent this problem. Simply pack the transit opening with ACTIFOAM pre-slit pads and you are protected against the spread of fire. Material is durable and reusable from project to project.Once cables are pulled through the transit, the system is easily converted to a permanent RISE or RIACNOF A-Class cable penetration.

RISE Single and Multi-pipe penetrations have been the penetration sealing product of choice for shipyards around the world for almost 20 years. The system is comprised of just two simple components - FRRLEHF rubber for insert sleeves, filler sleeves and wrap and FIWA Sealant, which provide the utmost in fire, water and gas protection. Installation is extremely simple: place a RISE Sleeve or wrap around each pipe, fill the remaining space with RISE Filler Sleeves, then apply FIWA Sealant to both sides of the penetration - it's that easy!Features of RISE Pipe Penetrations include: Approved for metallic or plastic, single or multi-pipe penetrationsLabor savings - installs in a fraction of the time compared to competitive systemsAllows pipes of dissimilar metals (andor plastic) to pass thru the same penetrationNo special transit frames requiredEasy re-entry for future pipe changes - no need to replace materialNo metal parts - no corrosionNo mineral wool in the system - protects against internal transit corrosionProvides vibration absorption and sound dampeningPrevents condensation on service pipesAllows longitudinal and radial movement of pipesFire rated A-0 up to A-60, H-0 up to H-120, Jet FireWatertight up to 2.5 bar (36.25 psi)Shock & vibration testedAge tested to 50 year service lifeTotally halogen free, non-toxic, low smoke index

RISENOFIRNO penetrations are the latest introduction to the CSDBeele family of passive fire safety products. Based on revolutionary new NOFIRNO technology, RISENOFIRNO offers ultimate flexibility for sealing any combination of metallic or plastic pipe penetrations. The system is comprised of just three components - rubber insert sleeves RISE Crushers (for plastic pipes) and NOFIRNO Sealant, which provide the utmost in fire, water and gas protection. Installation is extremely simple: place NOFIRNO filler sleeves within the entire penetration, then apply NOFIRNO Sealant to both sides of the penetration - it's that easy! For penetrations with plastic pipes andor cables, simply place a RISE Crusher around the plastic pipe, a RISE Insert Sleeve around the cable, then seal with NOFIRNO Sealant. RISENOFIRNO is the only product on the market approved to duct any combination of cable, metallic or plastic pipes through the same penetration.Features of RISENOFIRNO Pipe Penetrations include: Approved for metallic or plastic, single or multi-pipe penetrationsLabor savings - installs in a fraction of the time compared to competitive systemsAllows pipes of dissimilar metals (andor plastic) to pass thru the same penetrationNo special transit frames requiredPipes can be ducted off centerEasy re-entry for future pipe changes - no need to replace materialNo metal parts - no corrosionNo mineral wool in the system - protects against internal transit corrosionProvides vibration absorption and sound dampeningPrevents condensation on service pipesAllows longitudinal and radial movement of pipesFire rated A-0 up to A-60, H-0 up to H-120, Jet FireWatertight up to 2.5 bar (36.25 psi)Shock & vibration testedAge tested to 50 years - product works today and during entire service life of your installationRISE Extender Frame - doubles the usable space in any existing block transit

RISE Ultra Crusher system has revolutionized the sealing of plastic pipe penetrations. The system is comprised of just two simple components - a RISEULTRA Crusher and NOFIRNO Sealant. The system provides fire protection to A-60 and is also watertight rated.Features of the RISE Ultra Crusher include: Approved for all types of plastic pipes up to 160mm (6.30") ODCrushers squeeze down melted plastic pipe and seal opening during a fireLabor savings - installs in a fraction of the time compared to competitive systemsApproved for pre-insulated type chilled water lines. No need to interrupt insulation inside penetrationProvides vibration absorption and sound dampeningApproved for use in watertight boundariesPre-sized, bolt-on collars availableAge tested to 50 year service lifeTotally halogen free, non-toxic, low smoke indexMost economical product for plastic pipe penetrations on the marketDon't Sleeve It. "Crush it" with RISE Ultra Crushers

The DYNATITE High Pressure Sealing System was developed for vulnerable areas that may experience severe instantaneous pressure caused by explosions, flooding or other disasters. The high-tech design of DYNATITE actually allows the system to get tighter as the pressure increases. DYNATITE was specially developed for application in columns in semi-submersible offshore rigs, following incidents where traditional cable transit systems suffered catastrophic failure under high pressure. There's nothing else like DYNATITE to protect your critical systems and areas.Features of DYNATITE High Pressure Seals include: Tested to withstand pressures of 10 bar (145 psi)Approved for cables or pipesBased on SLIPSIL and NOFIRNO technologyAdapts to withstand static pressure immediately after dynamic pressurePlugs are compressible and will return to their original shape after shock pressureWide temperature range - works at temperatures from -50o C to +180o C (-58o F to +320o F)Age tested to withstand up to 20 years service lifeIdeal for ballistic bulkheads on Navy ships, and any areas where flooding would be disastrous

The ULEPSI Tank Supports were developed for tanker vessels carrying heated bulk liquids in independent tanks. ULEPSI was specifically designed to address problems of stress fractures in the vessel's structure caused by expansion and contraction, due to the large temperature differences between the tank wall and sea water.Features of ULEPSI Tank Supports include: Tested to withstand loads up to 98 tonsApproved for cargo with temperatures up to +250o C (+482o F)Reduces maintenance costs on the structure of the tank