Post Buy Requirement
CC
United States
Add Review

Our Products

BIAS CUT CARBON FIBER FABRIC

  • Wide 39.3
We are providing 2.4 oz. and 2.9 oz. carbon fabrics with a bias cut option. The illustration below will give you a visual on how we do this. The result is a parallelogram. If you order a 1-foot piece, the short side will measure 12 inches and the long side 55 inches. The most critical dimension is the 8.25 inches perpendicular to the 55 inch cut edge.
Model aircraft builders typically use this cut on the leading edge of their wings to carry torsion loads. To create a d-box, wrap the bias cut carbon from the top of the spar, around the leading edge to the bottom of the spar. The spar acts to close the d-box. To determine the amount you need to order, measure the distance around the leading edge and divide by 8.25". Round up to the next whole number and order that many feet. For example: If you measure 7" and you are making two wing d-boxes, divide 14" by 8.25" = 1.7 or 2 feet. You will receive a piece 24" on the short side, 55" on the long side and 16.5" perpendicular to the long side. See the diagram below:
View Complete Details

Carbon Fiber Prepreg

  • temperature 175-200°
Unidirectional carbon fiber pre-preg may be stored at 72F for 30 days. For maximum shelf life, store in a freezer and bring up to room temperature for fabrication.
CURE SCHEDULE: Ramp temperature at 6 F per minute to 175-200 F depending upon the desired viscosity. Hold for 20 minutes to allow for any trapped air or gas to escape. Ramp to 275 F at 6 F per minute and hold for 1 hour, cooling to 250 F prior to removing from the oven.

SPECIFICATIONS: Fiber aerial weight: approx. 150 grams per square meter, Resin content: approx. 35%, Thickness: 0.005-0.006", Yield: approximate 20 sq. ft. per lb., Width: typically 24". MSDS available upon request.

SHIPPING:Add $20 for custom packaging, includes insulation and ice. During the summer months, NEXT DAY shipping is recommended.
View Complete Details

Fiberglass Cloth

  • wide 2
  • Fiberglass Cloth 0.7
The lightest fiberglass fabric
Soft drape
Ideal for use in

Extreamly light models
Anywhere minimum weight is very important

Fiberglass Cloth, 0.7 oz., 38" wide, 2 yd. pkg. G01060-38 $11.50


Fiberglass Cloth, 0.7 oz., 38" wide, 5 yd. pkg. G01061-38 $20.75


Fiberglass Cloth, 0.7 oz., 38" wide, 10-24 yds.

Price per yard, Minimum quantity 10 yds. G01062-38 $3.00


Fiberglass Cloth, 0.7 oz., 38" wide, 25-99 yds.

Price per yard, Minimum quantity 25 yds. G01063-38 $2.30


Fiberglass Cloth, 0.7 oz., 38" wide, Volume Pricing - 100+ yds.

Price per yard, Minimum quantity 100 yds. G0106B-38 $1.81


Fiberglass Cloth, 0.7 oz., 38" wide, Volume Pricing - 500 yds.rl.

Price per yard, Minimum quantity 500 yds.
View Complete Details

S-Glass Cloth

  • wide 2
  • S-Glass Cloth 5.8
30% stronger than E glass
15% stiffer than E glass
Operating temperatures to 1500F
Ideal for use in high performance parts

In surf boards and wind surf boards
Anywhere higher strength to weight and toughness are needed
View Complete Details

Fiberglass Tape

  • wide 0.003
  • Fiberglass Woven Tape 0.5"
Light fiberglass tape
Narrow sizes
Ideal for use in

Extreamly light parts
Small parts
Fiberglass Woven Tape
0.5" wide, 0.003" Thick, 3 yd. pkg. GT03051 $3.95


Fiberglass Woven Tape
0.5" wide, 0.003" Thick, 10 yd. pkg. GT03052 $6.95


Fiberglass Woven Tape
0.5" wide, 0.003" Thick, 72-yd. roll
View Complete Details

Braided Fiberglass Tape

  • wide 2"
  • quantity 1 ft
Extreamly flexible
50 ftlb, 17.3 ozsq yd
.018" thickness
Ideal for use in

Seam joiner tape
Reinforce edges and corners

Braided Fiberglass Tape, 2" wide, 1-9 ft.
Price per foot, Minimum quantity 1 ft. GTB221 $2.70


Braided Fiberglass Tape, 2" wide, 10-24 ft.
Price per foot, Minimum quantity 10 ft. GTB222 $1.35


Braided Fiberglass Tape, 2" wide, 25+ ft.
Price per foot, Minimum quantity 25 ft. GTB223 $1.15


Braided Fiberglass Tape, 2" wide, Volume Pricing - 2+ lbs.
Price per pound, Minimum quantity 2 lbs.
Yield Approx. 50 ft.lb. GTB223-B $43.95
View Complete Details

Fiberglass Braided Sleeve

  • Minimum quantity 1 ft
  • Diameter 0.236
Light weight braided tube
Very flexable over a range of diameters
Ideal for use in

Wrap long thin parts for added strength
Conforms to the diameter of the core
View Complete Details

Fiberglass Tissue

  • Volume Pricing 100 yds./rl.
  • wide 35.5
Random fiber veil
Very thin and light weight
Ideal for use in

Surface layer with gel coat
Fiberglass TissueVeil, 0.3 oz., 1 yd. pkg.

1 yd. pkg. G941 $10.00


Fiberglass TissueVeil, 0.3 oz., 2 yd. pkg.

2 yd. pkg. G942 $13.00


Fiberglass TissueVeil, 0.3 oz., 3+ yd. pkg.

Price per yard, Minimum quantity 3 yds. G945 $6.30


Fiberglass TissueVeil, 0.3 oz., Volume Pricing - 100 yds.rl.
View Complete Details

Chopped Fiberglass Strand Mat

  • wide sq ft, 50"
Random fiber mat
Strength in all directions
Ideal for use to

Rapidly build up thickness
Chopped Fiberglass Strand Mat, 1.5 oz., 2 ft. pkg. G811 $5.95


Chopped Fiberglass Strand Mat, 1.5 oz., 10-24 ft.

Price per foot G812 $2.20


Chopped Fiberglass Strand Mat, 1.5 oz., 25+ ft.

Price per foot G815 $1.90


Chopped Fiberglass Strand Mat, 1.5 oz., Volume Pricing - 100 ft.rl.
View Complete Details

ARAMID (KEVLAR) FABRIC

  • CST Item # K111
  • Weight 1.06
  • Yarn Aramid 195
  • Thread Count 20 x 20
Aramid fibers are typically gold in color and require very sharp shears for cutting. Kevlar is DuPont's trade name for aramid. The best applications are where toughness is desired. Aramid is difficult to sand and is adversely affected by UV light so it is often buried under fiberglass or other material. Values shown are based on typical fiber data and should be used as a guide, not a specification. (Kevlar is a Registered Trademark of Dupont)
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Cst-the Composites Store, Inc.)
  • Tehachapi, CA 93581 map, United States
  • Share us via