Current Power, LLC

United States

The MRO is built for the aircraft hangar that wants it all, and with minimal wires and hoses across the hangar floor. This GPU has a true 400 amp continuous rating and up to 1600 amps of starting current. This model is typically built with 480 VAC input, but other voltages can be specified. The unit also has two output motor plugs protected by circuit breakers, which can be used to power other 480 VAC equipment nearby. Also included are six 120 VAC receptacles protected by 20A circuit breakers for use for heat guns and other power tools. A pneumatic air manifold is also provided with one inlet and six outlets for air tools, or any compressed air requirement. The unit also features our “Push Button Current Set” which allows the user to precisely set the maximum current limit with the push of a button. This will give the pilot and operator confidence that the unit will not allow too much current to be delivered to the aircraft during the starting cycle.

• Model Number28.5 VDC,

The Pilot's Edition is the popular MSR-650 with some added features, including a gravity foot brake and remote voltage sensing to the aircraft. This feature allows the GPU to regulate the exact aircraft voltage at the aircraft. This eliminates the drop in voltage in the aircraft cable. This GPU has enough power to start any aircraft, with a true 650 amp continuous rating and up to 2000 amps of starting current. It also features an exclusive re-connectable input from 208 to 575 VAC which makes a single model useable around the world, on any 50 or 60 Hz power. The unit also features our “Push Button Current Set” which allows the user to precisely set the maximum current limit with the push of a button. This will give the pilot and operator confidence that the unit will not allow too much current to be delivered to the aircraft during the starting cycle.

• Model Number28.5 VDC,

The MSR-400 is the little brother of the popular 600 amp mobile GPU. This GPU has a true 400 amp continuous rating and up to 1600 amps of starting current. This model also features an exclusive re-connectable input from 208 to 575 VAC which makes a single model useable around the world, on any 50 or 60 Hz power, and also features our “Push Button Current Set” which allows the user to precisely set the maximum current limit with the push of a button. This will give the pilot and operator confidence that the unit will not allow too much current to be delivered to the aircraft during the starting cycle. Built with a continuous welded enclosure and powder coated, this unit will look and perform flawlessly for many years to come. The wheels are solid soft non marking, and comes standard with a 40 mil-spec 20 foot aircraft cable with a molded aircraft plug, with input an AC Circuit breaker for maximum safety.

• Model NumberMobile 28.5 VDC,

The MSR-650 is our single most popular mobile GPU. This GPU has enough power to start any aircraft, with a true 650 amp continuous rating and up to 2000 amps of starting current. It also features an exclusive re-connectable input from 208 to 575 VAC which makes a single model useable around the world, on any 50 or 60 Hz power. The unit also features our “Push Button Current Set” which allows the user to precisely set the maximum current limit with the push of a button. This will give the pilot and operator confidence that the unit will not allow too much current to be delivered to the aircraft during the starting cycle. Built with a continuous welded enclosure and powder coated, this unit will look and perform flawlessly for many years to come. The wheels are solid soft non marking, and come standard with a 40 mil-spec 20 foot aircraft cable with a molded aircraft plug, and input an AC Circuit breaker for maximum safety.

The SMSR series is our stationary ground power unit specially designed for being fixed mounted in an aircraft hangar, avionics test lab, engine test stand or any other application where 28VDC aircraft power is required. The product ranges from 100 amp output all the way to 750 amps with peak power at 2000 amps, with higher outputs available upon request. Many options are available for these units including remote voltage sensing, which allows voltage regulation at a test bench or centrally located DC panel board. Input voltage must be specified at the time of order; any three phase voltage and frequency is available. The unit also features our “Push Button Current Set” which allows the user to precisely set the maximum current limit with the push of a button. This will give the operator confidence that the unit will not allow too much current to be delivered to the aircraft or test item such as starters or avionics during the test or starting cycle.

This stainless steel GPU is specifically designed for outdoor locations and or salt environments. The most popular application is for use on oil rigs to power helicopters or flight lines located next to the seashore. The GPU enclosure is made of 316 continuous welded and pacified. The enclosure is completely sealed and uses an air to air heat exchanger to remove the heat from the enclosure providing a true NEMA 4X rating. Also included is an internal heater to eliminate the chance of condensation when the unit is not operating. This GPU has a true 400 amp continuous rating and up to 1600 amps of starting current. With this model, the input voltage and frequency must be specified at the time of order. Various aircraft cable lengths are also available as an option. Our exclusive “Push Button Current Set” is also standard. This allows the user