Post Buy Requirement
CS
United States
Add Review

Our Products

CSI-39 Flex Abrasion Tester ASTM D3885

8.35 Lakh - 10.86 Lakh /unit Get Latest Price
  • Min. Order (MOQ) 1 ea
  • Country of Origin USA
  • Type Abrasion Tester
  • Voltage 110V, 220V
  • Certificate ISO 9001:2008
  • Automation Grade Semi Automatic
  • Model No. CSI-39

The CSI Flex Abrasion Tester is the most suitable instrument for rating textile materials for resistance to abrasion when the material is flexed for a period of time. The Flexing and Abrasion Tester is intended for use in determining the abrasion resistance of fabrics when a specimen is subjected to unidirectional reciprocal folding and rubbing action under known conditions of pressure and tension. To evaluate a material, a standard test sample is placed over the flex bar and held by the balanced head on top and the reciprocating block at the bottom. The abrasion test is initiated via an Operator Console, until the specimen breaks. The CSI-39 automatically detects the break to end the test.

Additional Information:

Payment Terms : L/C, T/T

Packaging Details : wooden crate

Delivery Time : 3-4 weeks

View Complete Details

AO Abrader

  • Model Number CSI-229
The AO Abrader tests lenses of varying curvature and thickness. The stroking arm carries the loading weight and an abrading pad holder. A predetermining electro-magnetic counter allows the sample to be abraded to the desired number of strokes.
The test consists of cleaning the surface to be abraded and measured in a hazemeter. The surface is abraded, cleaned and measured in a hazemeter again.
View Complete Details

Specific Heat Calorimeter

  • Model No. CSI-129
The CSI Specific Heat Calorimeter determines the mean specific heat of thermal insulating materials and adaptable for use with other materials. The unit is inherently simpler than those generally used in scientific calorimetry, but of adequate accuracy for most thermal measurement purposes.
View Complete Details

Surface Abrasion Tester

  • Model No. CSI-59
The CSI Surface Abrasion Testers is used for measuring resistance to wear of such materials as woven and knitted fabrics, napped and pile fabrics, hosiery, felt, non-woven and coated fabrics, yarns, threads and cordage, plastic films, rubber sheeting, leather, paper and many other materials. This tester features the Inflated Diaphragm arrangement.
The instrument is designed for ease of portability and use, it is possible to obtain reliable data by personnel without special skill. Its rugged construction, versatility and speed of operation, makes this instrument suitable for use in a research and development laboratory as well as in production lines for quality control of product.
View Complete Details

Armstrong Abrader

  • Model Number CSI-70
The CSI Armstrong Abrader is the most suitable instrument designed for testing the resistance to abrasion of flat plastic sheet or film compositions.
The Armstrong Abrader is designed to obtain quantitative measure of the resistance of sheet (rigid or semi-rigid) composition to the abrasive action of sand paper. Resistance to Abrasion by the use of this instrument is determined in terms of volume loss.
View Complete Details

Bending Forms

  • Model Number CSI-143
The CSI Bending Form is used for bending polymer samples to a preset radius of stress, in order to determine stress-cracking resistance.
Various forms are available for different stress levels and available in stainless steel or aluminum.
Model CSI-143-04L Elliptical Dow Bending Form
Low Stress
Per Y = 116 (400-X)
View Complete Details

Ink Wear Tester

  • Model No. CSI-119
The CSI Ink Wear Tester is used to measure the ink resistance to wear due to a rubbing action under controlled conditions of test.
Reciprocating Test Head with provisions to hold rubbing wear pads.
Head Weight Set for applying loads of 200, 300, 400, 500 grams
Specimen Holding Table
Predetermined Cycle counter, automatically ends test at end of count
Sample clamp fixture to keep sample securely positioned during test
Stroke range adjustable from 20 to 40 mm
Stroke Rate adjustable from 20 to 120 cycles per minute
View Complete Details

Stress Crack Resistance Tester

  • Model No. CSI-170
The CSI Stress Crack Resistance Tester is used for the determination of environmental stress crack resistance of polyolefin geomembranes using the notch constant tensile load test method.

The test apparatus consists of double wall insulated stainless steel bath with liquid stirring and temperature control system, fully programmable. The bath has an automatic control for immersing the specimens at the beginning of the test, and are out of the bath at the end of test. The bath includes an automatic liquid level control that maintains the liquid level in the tank constant for the duration of the test.

The apparatus can test up to 20 samples (standard, more may be placed optionally). Each test station is supplied with a weight basket, a fixed and a movable clamp, and a digital timer mounted on the operator console that follows each specimen until failure time is reached. All times are digital, and may be reset at once.
View Complete Details

Pilling Tester

  • Model No. CSI-53
The CSI Pilling Tester is used to determine the tendency of fabrics to form pills or fuzz under test conditions that simulate wear and normal use.
Because of the expense and time involved in testing fabrics by other means, a laboratory tester has been developed which will test the pilling tendencies of a fabric in relative short length of time using a smaller sample of fabric. The tester utilizes a circular rubbing motion to produce pills.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Custom Scientific Instruments, Inc)
  • Easton, PA 18040 map, United States
  • Share us via