Other Products / Services #1694078

Description:
Water Type Mold Temperature Controllers use water as heating media to realize heat exchange by direct cooling for standard temperature control from 120-160 degrees. Water type has its superiorities with high efficient heat transmission, less pollution, water resource easy to be attained with low cost

Three Five Axes AC Servo Driven Robots

Three Five Axes AC Servo Driven Robots are extensively applied to horizontal plastic injection machines from 753000T which are mainly designed for rapid and precise removal on strict demands of good appearance of finished products and spruces. There are two types of arms single stage and telescopic. The vertical strokes for single stage are 700800900 and for telescopic are 800900100011001300150017002000mm. Full AC servo motors are driven on three axes (traverse crosswise main arm) and fiveaxes (traverse crosswise & vertical for main arm & sub arm), take-out at super high-speed 1.4 sec and dry cycle time within 5.6 seconds. All linear movement are controlled by servo driven control systems to cooperate with high rigidity structure of linear guide rail for realizing high precise take-out and accurate repeatability.

Structural Units

High rigidity structure design, stable construction, low vibration, abiding and long service life.

High Performance Imported Ac Servomotor

Working with high precise linear guide way and imported steel wire belt driven result in high speed, low noise, precision position at 0.1mm.

Control System

Micro-computer control system was programmed & developed by TOPSTAR, write the program with more safety protection functions to provide safeguard for operator and IMM in accordance with insufficient safety protection for domestic IMM situation. In addition, we also can write the special program to meet customers special requirements for matching the various molds and grippers.
Palm controller incorporate, changeable Chinese English screen page, easy learning. Multi-functions and programs are provided for selection, automatically detecting, displaying and recording the malfunctions, conveniently maintain and problem solving.

Etensively applied to horizontal vertical plastic injection machines ranging from 50T 250T which can rapid take out the runners, runner and finished products from the mold of plastic injection molding machines, and place runners or runner into beside-the-press granulator for recycling immediately.
There are two types of arms-single stage and telescopic. The vertical stroke for single stage is 550mm and for telescopic is 650mm.
This series equipped with wrist rotation mechanism and gripper sensor can rotate products with 90.

Structural Units
Employed high strength & tension aluminum alloy to work with precise linear guide way, features with light weight, wear resistance, long service life.

Wrist Rotation Mechanism
The arm front section for installing gripper can rotate 90; absorbs & gripper jig can be installed with sensor device for detecting to get products or not.

Safety Protection
External signal interlock with injection molding machine to have double safety protection for molds to ensure no locking molds if parts are not taken out via the signal confirmation of finished product removal.

Control System
Palm controller, friendly operation interface, easy operation.

Single Axis AC Servo Driven Robots are extensively applied to horizontal plastic injection machines ranging from 50 1800T which can take out the runners, runner and finished products from the mold of plastic injection molding machines. There are two types of arms-single stage and telescopic. The vertical strokes for single stage are 600800 and for telescopic are 60080090010001200mm. The arms move stably thanks to two sections of double speed structure. The traverse movement is driven by high performance AC servo motor. With different requirements of products, robot can work with various grippers and jigs to realize stable & perfect take-out products from mold by quick- descent of removal of products and slow -descent to place outside.

Mechanical Structure

High rigidity structure design, stable construction, low vibration, abiding and long service life.
Vertical and crosswise movement is driven by pneumatic cylinder. Traverse, crosswise and vertical unit adopt high precision linear guide way result in high speed and accurate position, high wear resistance, heat resistance, long service life without distortion.

High Performance Imported Ac Servomotor

Working with high precise linear guide way and imported steel wire belt driven result in high speed, low noise, precision position at 0.1mm.

Jig Circuit

Molded parts are quickly remove from the mold and placed them carefully outside of machines. Remove quickly and place carefully, require various jigs according to different products to realize stable and perfect motion remove and place products safely.

Topstar Industrial robots are widely used in welding, stacking, punching and other aspects of industries. multi-axis robot posture structure expands the freedom, without interference; the operating characteristics of high-speed, improves production efficiency; the best means of improving the structure of the welding quality. Universal high-speed robot is also applicable to arc welding; compact, slim design saves more space.

1: F = base formula, W = wall hanging, C = inversion formula, S = rack (when wall hanging, the S-axis motion will be limited, please note.)
2: JIS B 8432 as a benchmark.
3: depending on the application, the operation mode differs.
4: moving purposes only.
5: The operating range of more than 1kg situation is different. According to corresponding load, use correct range of motion.
6: MH6F voltage is 1.5KVA.
7: HP20F voltage is 2.0KVA.
8: The shaded area represents the range of the S-axis, when P point not movable at -40 + 30 not actions.

Water Chillers adopt shell-shape condensers with the features of rapid heat transmission and excellent heat dispersion.
This series can be afforded cooling ranges from 535?, even lower to 3? (temperature controlled accuracy at 1?).
The compressors power range from 3HP50HP and cooling capacities range from 7800 128500 Kcalhr.
Feature
To adopt imported superb compressors and pumps to ensure safe & quiet running , power saving and durable service life.
To employ microcomputer with easy operation which can control temperature within 3? to 5? precisely.
Unique design for condenser and heat- dispersion unit result in excellent heat-exchange effect.
To equip with electrical current overload protection, high & low-pressure switch, electronic timer delay safety device. It will alarm to display faulty while any malfunction occurs.
To adopt with internal 304 stainless steel insulated water tank with durable service life for easy cleaning & maintenance.
Complete safety devices including power reverse phase & power short phase and anti-freeze protection.
Ultra low temperature type of chillers can reach below -15?.
Chillers for anti-alkaline & anti-acid type can be customized.

The workbench is made of PVC material which can protect the external appearance of products.
Conveyor speed can be adjusted freely from 06mmin, operate easily and use conveniently.
It adapts universal castors with brake which can fix and move easily.
It is not only can realize automation to work with robot by connecting peripheral signal but also can work independently.
The TBA and TBL Series adjusted aluminum alloy frame which the height can be adjusted according to requirements.
Customized spec are available according to customersspecial requirement.