Post Your Requirement Menu

Welcome User

Other Products / Services



  • Dead Zone 15.7 in (400 mm) from reference point
  • Max Measurable Distance 131 ft (40 m) or 328 ft (100 m)
  • Transmitting Frequency Approx 78 to 79 GHz FMCW
  • Update Time Maximum 10 seconds
  • Beam Angle 4 degrees

IDEAL FOR DIFFICULT ENVIRONMENTS Transmitting at a frequency of 78 GHz with a narrow beam angle of 4 degrees, the F78MP Series air radar level device is consistent and accurate in difficult environments. OPTIMAL POSITIONING To receive the best results, a directional (5 degrees), or aiming flange (10 degrees) is offered on the F78MP Series air radar, which allows the unit to be directed specifically at the desired location within the vessel. A flat flange is also available.

View Complete Details


  • Frequency 900 Mhz
  • Power Supply 120 VAC +/- 10%; 60Hz
  • Ambient temperature (Electronics) 40º to 185º F (-40º to +85º C)
  • Housing Material NEMA 4X, Fiberglass
  • Extended Range Antenna Up to 40 miles (64 km), NEMA 4X Outdoor includes lightening arrestor

Eliminates the need for cables and conduit connections between sensors and data collection devices. Standard InvisiLink radio communicates via RS-422 or RS-485 protocols. The 4-20mA converter from Bindicator can be used to allow wireless communications with 4-20mA sensors.

View Complete Details


  • Power Requirements 110/240 VAC or 24 VDC
  • Measuring Distance Up to 100 ft (30 m) depending on sensor
  • PLC Interface Option 32 channel block transfer, 6 channel discreet transfers, Profibus-DP Slave
  • Enclosures NEMA 4X fiberglass reinforced polyester
  • Temperature Up to 230º F (110º C) depending on transducer

Configurable for a number of sensors, relays, point level inputs, current loops and PLC interfaces, the SonoTracker is a non-contact level sensor that can be used for solid or liquid level measurement, open channel flow and differential level measurement.

View Complete Details


  • Operating Power Cap Level II: 120 VAC, 240 VAC; Cap Level IIA: 15-32 VDC
  • Power Consumption 8 Watts
  • Operating Temperature 40º to 160º F (-40º to 71º C)
  • Hysteresis 2.5% of span min, 100% max
  • Analog Output 4-20mA into 400 Ohms max

CAPACITANCE PROBE WITH A 4-20MA OUTPUT Cap Level offers continuous level measurement with features like selectable dampening for stability where severe agitation is present and span adjustments to make calibration easier.

View Complete Details


  • Power Requirements 115/230 VAC
  • Output MODBUS, Analog 4-20 mA optically isolated (user sourced) into 600 ohms max
  • Mounting 3” NPT, ANSI flange available
  • Enclosure Rating GP-4: NEMA 4; Mark-4: NEMA 4/7/9

The Bindicator YoYo is a weight and cable sensor specifically designed for managing dry bulk solids inventory; it is a continuous level measurement bin level sensor.

View Complete Details


  • Power Options 85-265 VAC 50/60 Hz, 90-265 VDC, 20 W max
  • Operating temperature range 40 to 65°C
  • Inputs Field selectable: 0-20, 4-20 mA, ±10 VDC (0-5, 1-5, 0-10 V), Modbus PV (Slave)
  • Protocol Modbus RTU
  • Display 6 digits, red LEDs

DIGITAL PROCESS METER Dual line display, multi-purpose meter that can be configured to display unique settings and requirements; including setting decimal places, units, 4-20mA span, relay actions, etc ISOLATED 24 VDC TRANSMITTER POWER SUPPLY Allows a 2-wire level sensor, such as the Bindicator TDR-2000 guided wave radar, to be powered and have an additional data display at the silo or at another location.

View Complete Details


  • Diffuser Cotton (Canvas) Up to 180º F (82º C); Fiberglass: Up to 600º F (316º C)
  • Diffuser Frame Galvanized Steel 16 mesh or 316 Stainless Steel mesh
  • Body Zinc plated steel or stainless steel
  • Dimensions L Series 3.75 x 7.5 in. (9.5 x 19 cm); LL Series: 6 x 12 in. (15 x 30 cm)

LOW PRESSURE AERATOR By introducing low pressure air into dry material the material can flow easier in hoppers or chutes with a bin aerator; available with cotton or fiberglass diffuser. Bindicator experts can help design a complete aeration solution. NON-CLOGGING DIFFUSERS & INTEGRAL ORIFICE The aerator diffuser provides equal distribution of air and will not clog with even the finest materials. The orifice is able to control the air consumption at any recommended pressure.

View Complete Details

Flo-Guard bin level switch

  • Output Relay DPDT, 5A @ 250 VAC or 28 VDC
  • Input Power 120, 240 VAC @ 5 watts; 60 Hz
  • Temperature Range 40° to 180° F (-40° to 80° C)
  • Probe Temperature 325° F (162° C) maximum
  • Mounting 1-1/4” NPT aluminum or 3/4” NPT SS

VISUAL INDICATORS LED lights indicate when the Flo-Guard bin level switch is powered on and when it goes into alarm. A test FOB can also be used with the indicator lights to evaluate the system's operation, without removing the switch's cover. REMOTE OPTIONS AVAILABLE For ground level access, high vibration areas or high temperature applications bulk level measurement.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Elizabethtown, NC 28337, United States