Post Your Requirement Menu

Welcome User

Other Products / Services

We offer the best product range of Abrasion-Resistant Urethane Hose, Marine Sanitary Hose, Universal Transfer Hose, General Purpose Blower Hose and Standard Suction & Discharge Hose - Series 400 (Green).

Abrasion-Resistant Urethane Hose

  • Code Number 106
  • Inside Diameter (Inches) 1-1/2
  • Weight Per Foot (Pounds) .31
  • Length Standard (Coil) (Feet) 100
  • Bending Radius Minimum (Inches) 3.8"

GEN-LINE Series 100 is ideally suited for the transfer of pellets, granules, slurries and other abrasive materials. This series features a heavy wall tube made of urethane, a resilient material known for its abrasion resistance and long term performance under demanding conditions. A rigid PVC helix provides reinforcement. With helix wrapped around the outside diameter of the hose, a "bearing" surface is created which makes it easy to drag hose across concrete and other rough surfaces. This Gen-line Series Urethane hose is much lighter than conventional suction hoses. It is very flexible and easy to handle. The hose maintains its flexibility at sub-zero temperatures, which adds to its versatility.

View Complete Details

Marine Sanitary Hose

  • Inside Diameter (Inches) 1-1/2
  • Outside Nominal Diameter (Inches) 1.78
  • Weight Per Foot (Pounds) .41
  • Length Standard (Coil) (Feet) 100
  • Bending Radius Minimum (Inches) 6.0

Specially formulated for use as waste water lines below deck. The Marine Sanitary hose displays practically zero permeation or absorption in tests conducted by independent laboratories and major marine toilet manufacturers. The hose is very flexible and easy to install. Also used for dockside pumping stations.

View Complete Details

Universal Transfer Hose

  • Inside Diameter (Inches) 1-1/4
  • Outside Nominal Diameter (Inches) 1.56
  • Weight Per Foot (Pounds) .31
  • Length Standard (Coil) (Feet) 100
  • Bending Radius Minimum (Inches) 3.2

A thermoplastic rubber hose with excellent chemical resistance. Recommended for use with fertilizer solutions; for septic tank pumping systems; and for use in waste water treatment plants. The Universal Transfer Hose has cold temperature flexibility down to -30 degrees F, and is easy to use because of its light weight. It withstands most commonly encountered chemical solutions, ozone and weather extremes. Recommended for both suction and vacuum service. With its cold temperature flexibility, Darcor Universal has proven to be very popular for septic tank service, and as an ice down hose at dockside.

View Complete Details

General Purpose Blower Hose

  • Inside Diameter (Inches) 1-1/2
  • Weight Per Foot (Pounds) .25
  • Length Standard (Coil) (Feet) 100
  • Bending Radius Minimum (Inches) 3.8
  • Outside Nominal Diameter (Inches) 1.75

A blower hose made from MSHA approved flame-resistant materials for use as a rock dust blowing hose in underground mines. The Rock Dust - General Purpose Blower Hose is also designed for insulation blowing and general air transfer uses. It has abrasion-resistant tube and cover for excellent durability and long life. With its low initial cost and excellent abrasion resistance, Rock Dust hose is also popular for many non-mining material handling applications. Mint green in color for high visibility.

View Complete Details

Standard Suction & Discharge Hose - Series 400 (Green)

  • Code Number 404
  • Weight Per Foot (Pounds) .32
  • Length Standard (Coil) (Feet) 100
  • Bending Radius Minimum (Inches) 5.5
  • Outside Nominal Diameter (Inches) 1.31

Now lighter, more flexible than ever, with tighter bend radius and higher working pressures. The Series 400 is one of the most versatile and widely-used hose in the industry, mining, construction, agriculture, marine, and in many areas of water use. This hose is substantially lighter than a reinforced rubber hose and is recommended for use in sump pumping, irrigation, sewage transport, spraying, construction pumping, ice slinger hose, powdered cosmetic handling and many more transfer applications.

View Complete Details

Commander Discharge Hose

  • Inside Diameter (Inches) 1-1/2
  • Outside Nominal Diameter (Inches) 1.78
  • Weight Per Foot (Pounds) .41
  • Length Standard (Coil) (Feet) 100
  • Bending Radius Minimum (Inches) 4.5

A versatile hose that provides excellent performance at a very low cost. The Commander Hose features smooth bore PVC tube for excellent material flow rates. Rigid white PVC helix reinforcement provides excellent working pressures and prevents hose collapse at full vacuum. Smooth gray PVC cover is abrasion-resistant. DARCOR Commander is the best buy for cost-conscious users.

View Complete Details

Lightweight Food Processing Hose

  • Bend Radius 1.5
  • Size I.D. 1"
  • Weight Per Foot .22
  • Standard Coil (ft.) 100

Constructed from FDA acceptable PVC formulations, Darcor Food Hose will handle a variety of food materials in dry or liquid form. Hose works equally well in gravity flow or vacuum service. Smooth bore assures full flow of material and is easy to clean. Darcor Food Hose features clear PVC tubing and white rigid PVC helix. With its corrugated surface, outstanding flexibility and lightweight, Darcor is easy to drag and handle when moving from workstation to workstation.

View Complete Details

3A Rated Food Hose

  • Inside Diameter (Inches) 3/4
  • Outside Nominal Diameter (Inches) .98
  • Bending Radius Minimum (Inches) 3.25
  • Weight Per Foot (Pounds) .17
  • Length Standard (Coil) (Feet) 100

The FDA "3A" approved hose for handling of milk and dairy products. This hose is also ideally suited for use with vinegar, syrup, and acidic liquids. The ultra-smooth bore of the Series 300 hose provides excellent flow rates when used for transfer of dry foodstuffs like sugar, flour, grain and vegetables. The Series 300 hose is completely clear with tube, rigid helix reinforcement and abrasion-resistant cover all made from transparent materials. This enables the user to constantly monitor flow of materials when hose is in use. This feature also facilitates inspection of hose after cleaning and flushing. The Series 300 hose complies with all FDA regulations for use in handling fatty foods, aqueous foods and beverages containing less than 50% alcohol. The hose is also in compliance with requirements for potable water. Series 300 will not impart or retain odors, or affect taste of food and beverages.

View Complete Details

Air Ducting Hose

  • Inside Diameter (Inches) 1
  • Bending Radius Minimum (Inches) 1.5
  • Weight Per Foot (Pounds) .13
  • Length Standard (Coil) (Feet) 100
  • Outside Nominal Diameter (Inches) 1.21

The Air Ducting Hose, Series 900 is lighter and more flexible, which puts it ahead of the field. Particularly suitable where moisture, condensation and deterioration are constant problems. Wide applications in heating, cooling, air conditioning operations, as well as air pollution control systems. Smooth I.D. for maximum air flow. Rigid PVC helix reinforcement eliminates corrosion problems of wire found in ordinary ducting. Easy to install. Economical. Series 900 Applications (Partial) Air transfer between aircraft Cool air supply, laser beam equipment Air supply, electronics manufacturing Air cooling, clean room applications Fume removal, photo plating Atmosphere control, produce plant Dust removal, candy maker Ship-to-shore supply and exhaust Supply and exhaust atmosphere, ship interior Air vent system, gas utility

View Complete Details

Grassvac Vacuum Hose

  • Inside Diameter (Inches) 4
  • Bending Radius Minimum (Inches) 0.71
  • Weight Per Foot (Pounds) .41
  • Length Standard (Coil) (Feet) 100
  • Outside Nominal Diameter (Inches) 4.46

A versatile hose that provides excellent performance at a very low cost. Grassvac Hose is used for lawn, leaf, mulch, and yard waste collection. It is also suitable for dust control, ventilation, and ducting.

View Complete Details

Standard Suction Hose

Now lighter, more flexible than ever, with tighter bend radius and higher working pressures. The Series 400 is one of the most versatile and widely-used hose in the industry, mining, construction, agriculture, marine, and in many areas of water use. This hose is substantially lighter than a reinforced rubber hose and is recommended for use in sump pumping, irrigation, sewage transport, spraying, construction pumping, ice slinger hose, powdered cosmetic handling and many more transfer applications.

View Complete Details

3A Rated Dairy Hose

The FDA "3A" approved hose for handling of milk and dairy products. This hose is also ideally suited for use with vinegar, syrup, and acidic liquids. The ultra-smooth bore of the Series 300 hose provides excellent flow rates when used for transfer of dry foodstuffs like sugar, flour, grain and vegetables. The Series 300 hose is completely clear with tube, rigid helix reinforcement and abrasion-resistant cover all made from transparent materials. This enables the user to constantly monitor flow of materials when hose is in use. This feature also facilitates inspection of hose after cleaning and flushing. The Series 300 hose complies with all FDA regulations for use in handling fatty foods, aqueous foods and beverages containing less than 50% alcohol. The hose is also in compliance with requirements for potable water. Series 300 will not impart or retain odors, or affect taste of food and beverages.

View Complete Details

Commande Suction Hose

A versatile hose that provides excellent performance at a very low cost. The Commander Hose features smooth bore PVC tube for excellent material flow rates. Rigid white PVC helix reinforcement provides excellent working pressures and prevents hose collapse at full vacuum. Smooth gray PVC cover is abrasion-resistant. DARCOR Commander is the best buy for cost-conscious users.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Charlotte, NC 28273 map, United States