Our Products #4742530

The EXT50C Series SPD is a compact, state of the art high energy surge protection system. Its compact size saves valuable electrical room space. Plus, it can be installed in most retrofit situations. Available with surge rating of 50kA, the EXT50C is listed to UL 1449 Edition 3. The EXT50C is listed as a TYPE 1 device which means you dont have to worry about where to install it. It can be installed upstream or downstream of the service main disconnect.TstpsaPsiof14a haItdodUsing special technology, the EXT series has lower let through voltages at high surge currents than similar hardwire devices. In addition, its technology prevents premature failure under unusual voltage conditions. Exclusive multipath protection means that redundant surge elements continue to provide protection even should an internal surge element fail.The EXT series includes intelligent indicators for each protection mode. You can confirm total protection with a quick inspection of the LED indicators.

The PEMCO HSP-121 Series is an advanced 3-stage hybrid, solid state power line protector. mode and normal mode suppression, nanosecond reaction time, power line tracking, and compression screw terminations make the HSP-121 Series an excellent choice in commercial and industrial applications.The HSP-121 Series offers a replaceable fuse designed to remove the load (protected equipment) from the line if the unit is either overloaded or the internal protection fails. This feature prevents surges from entering equipment through a failed protector, not noticed by the user. Unlike models with only an indicator, which may take weeks to notice, the HSP-121 Series demands immediate attention upon the unlikely occurrence of internal failure.

PJ60 advanced design combines the benefits of lithium powered UPS and advanced surge suppression technology. Slim form factor (just 1.25), wall mounting, and easy access receptacles make PJ60 ideal for mounting behind thin display screens used in hotels, restaurants, hospitals, campuses, airports and other commercial areas.While PJ60s compact design is appealing to the digital signage industry, it is also excellent for providing protection to espresso machines, kiosks, gaming machines, computers, point-of-sale equipment, and small printers.

The PEMCO FAS-31XTP is a single pair telephone protector that implements an advanced three-stage hybrid design. This unit addresses over-voltage transients with gas discharge tubes (GDT) and silicon breakover devices. Additionally, sneak and fault currents are mitigated with PTC technology, which consists of solid state resettable fuses

DPS PC642CCautionDo not place this product in service on any signal line capable of supplying more than 150 mA continuously.The Series surge protective device (SPD) is a two-pair (four wire) module implementing threestage hybrid technology. This SPD addresses over-voltage transients with gas tubes and silicon avalanche components. In addition, sneak and fault currents are mitigated with resettable fuses (PTCs). The PTCs increase resistance several orders of magnitude when over-currents exceed safe levels. A normal state resumes when overcurrents are removed. The ability to increases suppressor performance and survivability.The PC642C card edge is gold-plated, double sided and is designed to mate with the base accessory (PCB1B) gold-plated female terminal connector (sold separately). When snapped together, the data circuits pass thru the protector in a serial fashion from the four Field Side terminals to the four Electronics Side terminals. Terminals 1 or 10 of the PCB1B must be attached to BuildingApproved Ground

The MPAF Series Surge Protective Device (SPD) provides the industrys strongest level of surge protection in a very compact and easily installed unit. Unlike competitive bulky and expensive surge devices, the MPAF is modern and state of the art with extreme performance. It can handle over three times the average lightning peak surge current.The MPAF series is designed for primary protection at the service entrance. As the first-in-line protection device, the MPAF handles any incoming surges safely. Other applications include: branch panels, switches, equipment disconnects and generator transfer switches. The MPAF is used in OEM panels as well as solar combiner boxes. It fulfills the requirements for UL 96A lightning protection installations and light pole applications. The housing is constructed of UV-stabilized thermoplastic and meets the UL 50 Type 4x rating, making it ideal for both indoor and outdoor applications. All of the models have a 20kA nominal discharge current rating, the highest level recognized under the UL 1449 Edition 4 standard.The MPAF is a Type 1 device UL Listed to UL 1449 Edition 4 andcUL Listed to CANCSA C233.1. This allows installations on the line or load side of the service panel in accordance with the NEC 2014 or CANCSA C233.1 without the requirement for additional circuit breakers

The T1SPD is an easy to install surge protector that meets all applicable electric codes. It is used for 120240 electrical services and can be used in pairs for 240 V Delta 3 phase and 120208 Wye 3 phase services. The T1SPD is rated to handle surges 25% higher than the average lightning strike so it will work reliably for years. The T1SPD design prevents failure due to open neutrals or other system disturbances.The T1SPD is compact and includes an LED indicator to show that it is

The PEMCO DRS Series is a din rail mountable, single pair surge suppression module implementing three-stage hybrid technology. This module addresses overvoltage transients with gas tubes and silicon avalanche components. In addition, sneak currents are mitigated with resettable fuses (PTCs). The PTCs increase resistance several orders of magnitude when overcurrents exceed safe levels. A normal state resumes when over-currents are removed. The ability to self-restore in this .The DRS Series mounts onto a standard 35mm industrial din rail. There are three Field Side and three Electronics Side screw terminals. One is reserved for a shield. Three electrically tied ground terminals are provided for grounding the DRS Series unit to Building-Approved Ground. Shield is isolated from ground. Two (2) terminal versions without a shield connection are also available.