Post Buy Requirement
DB
United States
Add Review

Our Products

Seamless Bias Buffs

The Divine Cutmaster Bias Buff is designed to meet the rigorous demands of automatic machinery operating at high speeds, with increased pressures and dwell times.

The Cutmaster's puckered construction, coupled with the design of the air-cooled ventilated metal center, (removable or permanent) creates jet-steam ventilation for uniform airflow between the buffs assembled on the spindle. Air is drawn in through the metal center vents and centrifugally forced between the sections and outward to the face, which helps overcome excessive heat build-up encountered in automatic buffing.

Cutmaster Bias Buffs are made in a variety of types to handle any job requirement from heavy, high-production cut-down to light coloring operation. These buffs work equally well for off-hand, semi-automatic and automatic operations. Cutmaster may be used on ferrous, non-ferrous, precious metals or plastics.

Cutmasters run cooler, cut faster, wear longer than other types of wheels under high-speed conditions. They must be run between vented steel flanges at least 1" larger in diameter than the metal centers.

See Steel Flanges

Divine Brothers Cutmaster buffs are available in single units or cartridge packs for economical loading. Cutmaster buffs are available in closed or open-faced construction, in various styles, cloth grades and woven sisals. Solid fiber centers are also available.
General Purpose

Used for cutting down and finishing operations. These wheels are excellent for heavy work.
The rigid construction allows for greater pressure and faster cutting speed.
Extend the life of your Cutmaster up to 30%. Choose our Dura-Tuf Hi-Tech Mill Treatment. (Red Color)
Choose a softer material, less ply or a lower density for your coloring or wipe off applications.
View Complete Details

Full Disc Buffs

Available in an almost unlimited variety of material, diameter, thickness and sewing styles.
See:
Material Selection Chart

Buff Selection Chart

Custom Sewing Styles

Custom made to your order.

See Full Disc Custom Quote Form
Assured Uniform Wear - Ply is automatically turned during assembly.

Stitching is tight - 5 or more stitches to the inch and we can sew them to 18" of a buff's periphery.

Stocked Buffs - See Full Disc Buff Wheels Stock List
Divine's Full Disc Buffing Wheels have enjoyed the reputation of work horses of the industry since 1892. Those illustrated here show the sewing styles most frequently requested. We'll furnish other sewing to your specifications. See Custom Sewing Section.

Discs are automatically turned during assembly to insure even distribution of thread ends throughout the buff. Divine Full Disc Buffs last longer and give the finished quality you expect.

There's almost no limit to the variety of materials, diameters, and thicknesses available in the Divine Full Disc line. We custom-make them to your order.

You name it we make it!

Over 100 years of excellence and commitment to quality and service.

See Buff Selection Chart
See Material Selection Chart
See Custom Sewing Styles See Full Disc Stock List
View Complete Details

Super Difold Buffs

In the Divine Folded Full Disc Buffs, the discs are folded into segments. Directional arrows on the buffs indicate correct rotation to "cut" and "color".

Operated in the "cut" direction, the rotation firms up the pockets into an aggressive edge for cutting operations. Reverse the direction and the pockets open up, providing a softer face for flexible coloring action.

Difolds hold compound better making them cut faster.
Construction facilitates less sticking on work piece.
Buffs are thicker than ordinary full disc buffs so require fewer sections per wheel (costing less per inch of piece).
Divine Folded Full Disc Buffs are available in four constructions:

1. Difold: 18-ply, double folded
2. Double Difold: 34-ply, double folded
3. Half Super Difold: 18-ply, triple folded
4. Super Difold: 34-ply, triple folded
These buffs can be supplied in all standard cloth grades, in specialty and treated materials.
View Complete Details

Bias Buffs

Untreated, this buff is soft and flexible, providing a nice cushion for highly contoured work.

Used for light cutting and coloring.

Ideal on light stock or thin gage metals.

More material than standard general purpose bias buffs, lets this product wear longer and reduces set up time.

Mill-treated or dip-treated, this is a very aggressive cutting buff which will still retain some flexibility.

The many folds of material hold larger amounts of compound for greater aggression.

Commonly used for cut down on brass plumbing fixtures and other irregularly shaped parts.
View Complete Details

Nylon Brushes

NYALOX, the original abrasive nylon brushes, has been redesigned to improve performance over a broader range of uses. NYALOX is the only nylon brush line available in three grits and bristle diameters. Conveniently color-coded for easy identification.

Gray-Extra Coarse, Orange-Coarse, and Blue-Fine. See the difference fo ryourself. Quality and selection backed by the technical support of over 100 years of experience, all adds up to better performance. NYALOX the one and only, now three times better.

Will not rust & maintains shape.

Will not shed bristles under normal conditions.

Abrasive Grit is impregnated throughout each bristle.

Each grit is conveniently color-coded for easy identification.

Safer to use, will not puncture skin.
IDEAL FOR

Removing paints, corrosion, weld scale, surface rust & burns from metals.

Prepare plastic, fiberglass, & rubber surfaces for adhesives.

Preparing Metal surfaces for primers & paint.

Cleaning unfinished tile, stone, cement, and brick mortar.

Removing old paint and finishes from wood.

Cleaning & Sanding wood turnings, railings, banisters, trim & molding.

Rounding and blending edges, cutouts and joinings.
View Complete Details

Flap Wheels

Met-L-Brasive Flap Wheels

Interleaf Flap Wheels made upon request.

From "Start to Finish" Divine manufacturers all products you need to get that precise finishing touch.

See list of sizes and grits available.

Used to sand and finish wood or metal contoured parts.
View Complete Details

Red Lion Abrasive Lubricants

Divine Brothers manufacturers a full range of abrasive lubricants for every purpose. Red Lion Abrasive Lubricants are recommended to extend the life of your abrasive products.

Listed below are our most popular product types. Please give us feedback if you would like your lubricant a little different.

The Red Lion Abrasives Lubricants listed are from softest to hardest.

Used to keep abrasive clean, non-loading.

Used to keep belt and part cooler.

Used to keep belt sharp.

Remember custom formulation is NO problem!!
Red Lion Abrasive Lubricants are recommended to extend the life of your abrasive products.
View Complete Details

Polishing Wheels

Divine Clothflex Polishing Wheels are headed with hot glue or cold cement


and rolled into a loose abrasive. The wheel is used as a flexible grinding or polishing tool. Clothflex polishing wheels are a superior value in any polishing operation.
100% Cotton
Built to Uniform Standards
Consistent and Controlled Density
Full Diameter
Smooth Face, Ready to Head
Precision Trimmed to Run True
Full Uniform Thickness
Delivered as Specified
Divine Clothflex Polishing Wheels are manufactured in your choice of diameter, cloth grade, density, arbor hole or sewing to conform to your unique polishing needs. The wheel features high quality canvas covers on both sides. This protects the wheel from injury and supports the outside edges to reduce the tendency to mush over.

When headed and balanced, DIVINE POLISHING WHEELS run true, resulting in longer wheel life and more finished pieces in each production run.

Arbor Holes - Reinforced to insure retention of original hole diameter. Holes may be equipped with optional steel or cast iron bushings for still longer life and usefulness.

Densities - Seven standard densities - from extra soft to extra hard. Densities are determined by involving variations resulting from buff thickness, type of sewing, sewing spacing, thread tension, length of stitch, type of bond used and pressure used to assemble finished wheel. Divine has maintained its density standards for half a century insuring controlled standards.

Heading

Specify the abrasive and we will head your wheels for you.
See Stock List
See Quote Form
View Complete Details

Buffing Wheels Disc Buffs

  • Stock List 525-40-3m
  • Description 3" dia, 1/2" face, 1/4" mandrel, spiral sewn
Mandrel Mounted buffs are available upon request.


Divine has 3"and 4" diameter mandrel mounted buffs in stock.

Contact Us for more information.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Divine Brothers, Inc.)
  • Utica, NY 13503 map, United States
  • Share us via