Dynacron LLC

United States

• temperature rang-350° to +1000° F (-188° to +538° C)

The Dynacron process is completely inert, non-toxic and non-migratory. The coating is unaffected by gamma radiation and ethylene oxide. It has been widely used on medical products such as surgical instruments, medical and dental equipment components, pharmaceutical tablet punches, MRI and diagnostic equipment.

• temperature range-350° to +1000° F (-188° to +538° C)

The sub-micron lamellar crystalline structure creates a complex capillary surface environment aiding in fluid lubrication retention providing significant reduction in wear characteristics. The low coefficient of friction (0.030 dynamic) reduces drag and improves lubricity translating to an increase in performance in most environments.

• temperature range,-350° to +1000° F (-188° to +538° C)

Dynacron can be applied to all PVD and CVD coatings in addition to all Ferrous and non-ferrous substrates. The extremely low coefficient of friction improves chip evacuation on cutting tooling and significantly reduces galling, material adhesion and residual pickup. Dynacron has been used successfully on end mills, saw blades and drill bits. It is also an excellent addition to chucks, tooling holders and die components.

• temperature range-350° to +1000° F (-188° to +538° C)

Widely used in the racing industry and secondary automobile product market, Dynacron offers an extremely low coefficient of friction (0.030 dynamic) significantly improves lubricity characteristics and reduces wear on most engine parts. It has been successfully utilized for rack and pinion gears, gear box components, pistons, cam shafts and transmission components.

• wide temperature range,-° to +1000° F (-188° to +538° C)

The sub-micron structure (0.5 micron) is completely uniform with virtually no dimensional change and is an excellent lubricity coating for tight tolerance components such as gear teeth, bearing races, cages and balls. The lamellar crystal structure improves wear characteristics, prevents spalling, reduces friction and noise and is compatible will fluid lubrication. It can be applied to all ferrous and non-ferrous metals.

• temperature range-350° to +1000° F (-188° to +538° C)

With operating temperatures between -350 to +1000°F (-188° to +538° C) the Dynacron dry film lubrication process will significantly improve part release and material flow for most high density plastics, including; polycarbonate, polyethylene, polypropylene, ABS, polycarbonate and styrene. The improved flow characteristics and part release permit lower temperature and pressure requirements while producing a significant reduction in cycle times. In addition the improved release eliminates or minimizes flash, sticking, scuffing and other blemishes. Dynacron reduces friction and breakage for ejector pins and improves lubricity and reduces wear on gibs, slides, lifters, leader pins and bushings.