Post Buy Requirement
EI
United States
Add Review

Other Products / Services

Trace Moisture Analyzer

  • Series PPM1
The Edgetech Instruments Model PPM1 is a trace moisture analyzer designed specifically for monitoring moisture levels in dew point and PPM units. This trace moisture analyzer utilizes an electro-chemical (P205) sensor in combination with a proprietary semi permeable diffusion membrane.

The principle of operation applies the Faradays Law of Electrolysis which measures the dissociation current making it a fundamental measurement of the moisture present. The PPM1 is ideally used in relatively clean, dry, inert gas applications.

Sensitivity below 1ppm
Fast response
Long sensor life
Low cost
Fundamental measurement of moisture content
Displays outputsdew point (CF) and PPM values
Air Separators
Medical Gas
Pharmaceuticals
Semiconductor
View Complete Details

Vigilant Aircraft Hygrometer

  • Series 137
The Edgetech Instruments Model 137 Vigilant Aircraft Hygrometer is a rugged, shock mounted military qualified instrument used for the primary measurement of dew point in flight or in installations with existing flow, such as wind tunnels.

It features a miniature remote dew point sensor employing a platinum resistance thermometer, and has 15 feet of interconnecting cable to the control unit. Precision calibration units for the linear analog outputs are included.

The specially designed dew point sensor is mounted through the skin of the aircraft and is mounted to either the left or right side of the aircraft.

The dew point is detected by using chill mirror technology assuring precision accuracy, repeatability and reliability.

The Edgetech Instruments Model 137 Vigilant Aircraft Hygrometer is a rugged, shock mounted military qualified instrument used for the primary measurement of dew point in flight or in installations with existing flow, such as wind tunnels.

It features a miniature remote dew point sensor employing a platinum resistance thermometer, and has 15 feet of interconnecting cable to the control unit. Precision calibration units for the linear analog outputs are included.

The specially designed dew point sensor is mounted through the skin of the aircraft and is mounted to either the left or right side of the aircraft.

The dew point is detected by using chill mirror technology assuring precision accuracy, repeatability and reliability.

Measure dew points in flight
Rugged shock-mounted, military qualified
Configuration for left or right hand mounting is available
110Vac power
Chilled mirror sensor selection required (Click here for information on sensor selection)
Atmospheric Sciences
View Complete Details

DewMaster Chilled Mirror Hygrometer

Edgetech Instruments field-proven chilled mirror technology.
One, two or three stage sensors available - integral or remote from controller.
NIST traceable calibration certificate.

Depression range choice of either 45, 65 or 95C . (one, two or three-stage cooling)
Automatic Balance Control (ABC)
Automatically corrects for most mirror contaminants.
Automatically restandardizes the instrument.
You choose time and interval of restandardization, for best convenience.
Increase the length of unattended operation.

Dual alarm capability
User programmable.
Can be set for latching or auto-reset mode.
Form C for greater versatility.

Serial and analog outputs.
RS232 communication with terminal, printer, or computer
Remote programming.
Data output such as dew point and alarm status.

0-5 VDC, 4-20 mA, 0-10 VDC, or 0-20mA
User scalable to drive peripheral devices.
Available simultaneously, one output per measurement parameter.
Scalable throughout the entire operating range of psychrometric variables.
Program via front panel or remote serial port.

Pressure transducer input for psychrometric variable.User scalable to drive peripheral devices.
Available simultaneously, one output per measurement parameter.
Scalable throughout the entire operating range of psychrometric variables.
Program via front panel or remote serial port.

Pressure transducer input for psychrometric variable.
3 parameter measurement - dew point, temperature, pressure
3 line dislpay and analog outputs
Table toprack mount
Nema 4 housing option
Educational Institutions
Government Agencies
Metrology
Pharmaceuticals
View Complete Details

Portable Dew Point Monitor

  • Series 1500
Finally, a portable Dew Point hygrometer that integrates the accuracy and reliability of the Edgetech Instruments chilled mirror, with the battery life and ruggedness required for field use.

Introducing the Model 1500 portable chilled mirror hygrometer. This device incorporates all of the standard features that youve become accustomed to from Edgetech Instruments, such as drift-free NIST traceable accuracy, low maintenance, high durability and ease of use, in a system that is ideally suited for the demands of field use. Whether you use the Model 1500 as a field transfer standard, or to spot check your process air dryness or Endo gas dew point, youll find this system trouble-free to operate.

The Model 1500 is a self contained system; not only is there no field assembly required, theres no need to carry around a myriad of individual components such as control boxes, sensors, cables, pumps, and power cords. Simply attach the sample line, adjust the flow (with the integral flow meter) and turn on the power. Within minutes youll be collecting field dew point data with the same chilled mirror accuracy of a lab standard hygrometer. And with a nominal battery life of 12 hours, you will be able to collect for the entire shift or spot check your processes for several days.

Primary measurement technique
NIST Traceable
Rechargeable Batteries
Easily transportable in hard protective case
Wide measurement range(-75 to 75C)
Microprocessor controlled
Self balancing
Chilled mirror sensor selection required
Compressed Air
Educational Institutions
Government Agencies
Metrology
Pharmaceuticals
Plastics
Power and Energy
View Complete Details

Portable Trace Moisture Analyzer

  • Series PPM2
The Edgetech Instruments Model PPM2 is a portable battery powered trace moisture analyzer designed specifically for monitoring moisture levels in dew point and ppm units. This trace moisture analyzer utilizes an electrochemical (P2O5) sensor in combination with a proprietary semi permeable diffusion membrane.

The principal of operation applies the Faraday's Law of Electrolysis which measures the dissociation current making it a fundamental measurement of the moisture present. The PPM2 is ideally used in relatively clean, dry, inert gas applications.

PPM2-FV Positive Pressure Application, a portable battery powered trace moisture analyzer with a flow valve.
PPM2-VP Atmosphere Vacuum Application, a portable battery powered trace moisture analyzer with a vacuum pump.

Battery Powered, rechargeable batteries, charger included
Fast Response
Sensitivity below 1ppm
Long sensor life
Fundamental measurement of moisture content
Displaysoutputs - dew point (CF) and PPM values
Air Separators
Medical Gas
Pharmaceuticals
Semiconductor
View Complete Details

Motor Octane Testing DewTrak II MO

The Edgetech Instruments Model DewTrakII MO dew pointhumidity transmitter is an optical chill mirror hygrometer designed to continuously measure the moisture content and Barometric pressure in the motor octane testing process. It is used to monitor and ensure compliance with test standards ASTM D2700, D2699, D2885. It guarantees measurement compliance for allowable Humidity range between 2550 grlb & Pressure 2130 in Hg (0.1 in Hg).

The DewTrak MO powered by 24Vdc and can be easily fitted to existing Knock engine systems. It is specifically designed to measure conditions required for Motor Octane (MON), & Research Octane (RON) It uses the chilled mirror dew point temperature condensation principle to determine the water vapor concentration and barometric pressure measurement of the motor intake air fuel mix.

Outputs include 4 to 20mA, 0 to 5 Vdc, or 0-10Vdc and an RS232 serial port as well as electrically isolated relay contacts.
Electronics housed in IP65 enclosure

4 wire PRT measurement for Dew Point

0.5grlb Accuracy for Dew Point

Barometric Sensor

0.044 Hg accuracy for Barometric Pressure

Long term stability and repeatability

Manifold Assembly Kit

LCD Display

Comes with a NIST certificate of compliance

Probe is installed in air tight housing with minimal resistance to intake air

Automotive
Educational Institutions
R&D Test & Measurement
Dynamometers
Engine Test Cells
View Complete Details

PTDM Pressure Transducer

Edgetech Instruments Pressure Transducer is designed for accurate pressure measurement of gases or liquids compatible with stainless steel. The high level output signal requires no additional signal conditioning and results in excellent stability, accuracy, and fast dynamic response, making the Model PTDM ideal for high performance applications.

The stable electronic circuit, combined with Edgetechs patented variable capacitance sensor, results in the ultimate in design simplicity. The sensor features a one-piece 17-4 PH stainless steel pressure sensor and an insulated electrode, which forms a variable capacitor. As the pressure increases, the capacitance decreases. This change in capacitance is detected and converted to a linear DC electric signal.

General Purpose
High Accuracy
R&D Test & Measurement
Vacuum Systems
Dynamometers
Engine Test Cells
View Complete Details

Handheld RH Meter

  • Series 635-1
Accurate Humidity measurements are becoming increasingly important, along with eliminating the hindrance of wires and having the versatility to measure in those areas where cabling is almost impossible. The 635 is the solution for many of those applications.

The Edgetech Instruments Model 635-1 is a robust and reliable measuring instrument with the protection class of IP54. The large back lit display allows the user to easily view the dew point, RH and temperature readings. The 635 offers both standard plug-in probes and optional wireless probes that can measure up to a distance of 20 meters. A maximum of 3 wireless probes can be used at one time and can be retrofitted with the 635 at anytime. All probes are equipped with a patented humidity sensor offering long term reliability and guaranteed accuracy based on results from worldwide laboratory tests. The 635 is equipped with a secured carrying strap for safe transporting and has heavy duty magnets on the back to ensure secure attachment at the measuring location.

Highest precision 2%RH
Wireless probes can be retro fitted at any time
Backlit display
Protection type: IP54
Connection up to 3 wireless probes
Easy to follow menu
Government Agencies
View Complete Details

DewTrak II Chilled Mirror Transmitter

The Edgetech Instruments Model DewTrak II dew point humidity transmitter is an optical chill mirror hygrometer designed to continuously measure the moisture content in gases. The instrument is powered by 24Vdc.

The DewTrak II uses the chilled mirror dew point temperature condensation principle to determine the water vapor concentration in gas mixtures, and a platinum resistance thermometer to accurately measure that temperature. Outputs include 4 to 20mA, 0 to 5 Vdc, or 0-10Vdc and an RS232 serial port as well as electrically isolated relay contacts.
4 wire PRT measurement for Dew Point and AT (optional)
0.2C Accuracy for both Dew Point and Temperature
Long term stability and repeatability
RS232, bi-directional, Serial Output
Electronics housed in IP65 enclosure (Wall Mount)
Aluminum housing for other configurations
2 analog outputs (4-20mA 0-5Vdc to 0-10Vdc selectable)
Automotive
Educational Institutions
Government Agencies
HVAC
Pharmaceuticals
View Complete Details

OxyTrans-EX Explosion-Proof Oxygen Transmitter

4-20 mA Loop Powered Two Wire Oxygen Transmitter

The Edgetech Instruments Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument.

Measuring Range

The unit will offer ranges between 0-100ppm, 0-1, 000ppm, 0-10, 000ppm of oxygen. 0-1% to 0-25% O2.

Sensor

The OxyTrans uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.

A 2 wire explosion-proof in-line oxygen transmitter
II 12 G Ex ia IIC T4 (ATEX approved)
4-20mA output
Display: 6 digit alphanumeric with bar graph
5 ranges offered: 0-100 ppm, 0-1, 000 ppm, 0-10, 000 ppm, 0-1%, 0-25%
Oxygen sensor: a micro fuel cell
Easy, accessible potentiometer
Air Separators
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (Edgetech Instruments, Inc.)
  • Hudson, MA 01749 map, United States
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/usa/company/edgetech-instruments-inc/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457984{main}( ).../index.php:0
20.01802028360include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02732751056include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03313686760header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice