Post Buy Requirement
EC
United States
Add Review

Our Products

SigmaSeal Sealing

SigmaSeal was designed as a self-energizing seal that eliminates the need for adjustable glands or live loading. The unique design of the seal separates the media from the enclosed end of the seal jacket protecting the expander from any corrosive environment.

It is particularly well suited for applications requiring good sealability against media that cannot tolerate exposure to metal or elastomeric energizers found in conventional seals.

The design responds to slight changes in pressure and regulates seal interference to control friction. The SigmaSeal system automatically adjusts for wear, misalignment, and service irregularities.
View Complete Details

OptiVee Sealing

OptiSeal and OptiVee seals and packing systems are energized seals that provide reliable, low- friction sealing solutions. They come in a variety of profiles and materials; each specifically manufactured to address your individual application.

The basic design of the OptiSeal consists of a U-shaped jacket made from an inert thermoplastic. Its then energized by a compressed V-shaped metal spring or O-shaped elastomer. The seals performance in extreme temperature, pressure, and media make it an ideal choice for severe- service sealing.
View Complete Details

Custom Pump Component

For over five decades, EGC Critical Components has served as an industry leader in designing and manufacturing custom critical pump components. Interfacing directly with API 610 centrifugal pump OEMs, repair facilities, and end users, we offer quick turnaround design solutions, such as:

Wear rings
Bearings
Bushings
Inter-stage
Throat throttle
Line shaft (vertical pumps)
Bowl bushings (vertical pumps)
Diaphragms
Packings
Pump Liners
Seals
Mechanical
Bonded
Reinforced
Composite
Sleeves and liners
Thrust Pads
View Complete Details

Precision Components

EGC specializes in designing and manufacturing custom thermoplastic and elastomeric precision components for a wide range of industries. We use advanced plastics and elastomers to create custom parts for a diverse range of products from small, 18 hearing aid parts to large 110 wind turbine componentsat extremely tight tolerances.

We are experienced in manufacturing a diverse set of precision parts for a multitude of applications including filtration, purification, weaponry, chemical processing, nuclear, life sciences, and semiconductor manufacturing systems.

Our experts work closely with you from design to final product. We can create the design to match your specifications, or make your existing design a reality. Difficult applications are our expertise, including high pressures and temperatures, corrosion, friction, and wear.
View Complete Details

PTFE Tape

EGCs insulated PTFE tape offers excellent sealing properties where high temperature or chemical resistance is needed in electrical applications. Applications include cable insulation, flight actuators, landing gear, and braking systems.

It is resistant to oils, chemicals, water, solvents, and gases and can be manufactured in a variety of colors:

Natural
Standard White
High Contrast White (laser markable)
Gray (laser markable)
Our capabilities are diverse and are designed to meet a wide range of requirements. We manufacture tape in thicknesses starting at 0.0025'' (0.064 mm) and widths from 316" to 11-12" (4.7 to 292.1 mm). Product is delivered in rolls that can be packaged as either pancake or traverse-wound, depending on the slit width.
View Complete Details

Fibrex Bearings

Fibrex material are specifically designed for bearings. They consist of a unique fabric weave of PTFE Glass fibers which is bonded to a stainless-steel backing with a durable adhesive. The PTFE fibers provide extremely low friction while the glass fibers provide structural support and a surface for bonding.

The stainless-steel backing provides extreme load-bearing capabilities beyond the range of solid PTFE and any other solid-lubricant bearing.

Fibrex Bearings are a unique thin-wall bearing design that offers the strength and stability of a stainless-steel body with the low coefficient of friction (.05-.1) and tribological properties of a reinforced PTFE matrix. With a maximum bearing load of 50, 000 psi and the ability to withstand temperatures up to 350F, our Fibrex bearing is dimensionally stable, self-lubricating, non-conductive, and non-magnetic.

Both radial-bearing and thrust-washer designs are available. Applications include valves, commercial fire sprinkler systems, mixers, blenders, swivels, and extruders.

Consider Fibrex when

Corrosive substances are present
Contamination from lubricants is not tolerated
Replacement is critical and costly
High impact loads are encountered
Bearings will be subjected to very high loads at low speed
Lubricant films cannot be maintained in the bearing area
Custom sizes are needed
.027 - .090 Thickness
8 max diameter
8 max length
View Complete Details

Seals For Valves

Our experienced engineers have designed and manufactured components for a variety of valves: butterfly, ball, gate, globe, check, control, and pressure relief.

EGC products and solutions help clients achieve long-term value through extended wear, improved performance and operating range, greater reliability, and engineering assistance to improve manufacturability.

We manufacture a variety of valve components including:

Valve seats
Machined valve seats
Injection molded plastic seats
Plastic over molded metal seats
Rubber seats
Rubber bonded to plasticmetal seats
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • (EGC Critical Components, LLC)
  • Humble, TX 77396 map, United States
  • Share us via