Our Products #4954848

This CSA-certified, non-jacketed flexible aluminum conduit has many universal wiring applications. It is often referred to as Heavy Wall Flex.High Strength Aluminum AlloyHelically wound, formed stripHeavy Gauge

This extra-flexible steel conduit is recognized by UL and CSA for use within listed and certified assemblies.Hot Dipped Galvanized SteelHelically wound, formed st

This UL and CSA listed nonmetallic liquidtight conduit is ideally suited for continuous flexing situations. It is often specified in Power Track or cable carrier installations and on industrial robots. It does not contain a metal core which could fatigue from repeated flexing or vibration.Type LNM-P is intended for installation in accordance with Article 356 of the NEC (ANSINFPA-70) for flexible liquidtight nonmetallic conduit (LFNC-A or FNMC-A). For containment of 1000 volt and lower potential circuits.Listed and marked for outdoor use.Installations in hazardous (classified) locations:Class I Div. 2 Article 501Class II Div. 1&2 Article 502Class III Div. 1&2 Article 503

A flexible steel conduit which is both listed by Underwriters Laboratories Inc. and certified by Canadian Standards Association. It offers outstanding protection against wet, oily conditions and is permitted for use in exposed or concealed locations.

Blue Ribbon (BR) This UL listed non-jacketed flexible steel conduit has many universal wiring applications. It is often referred to as Greenfield or Reduced Wall Permitted to be used in exposed and concealed locations (Section 348.10)For containment of 1000 volt and lower potential circuits (Unless otherwise permitted)Grounding conductor requirement for flexible installations (Section 348.60)Suitable as an equipment grounding conductor (Section 250.118(5))Wiring in elevators, hoist ways and escalators. (Section 620.21)Limit on use of 38 inch trade size. (Section 348.20)Raceway connection to motors (Section 430.223)Cranes and hoists (Section 610.11)

Aluminum Blue Ribbon (ABR) This UL listed non-jacketed flexible aluminum conduit has many universal wiring applications. It is often referred to as Greenfield or Reduced Wall Flex.

A general purpose, UL and CSA listed, nonmetallic liquidtight conduit offering excellent protection to wiring from abrasion, sunlight, mild acids, alkaline and oils. Often used for air conditioning hook-ups and other outdoor applications

This version of Type NM is designed to withstand high temperature environments. NMHT can be used to contain conductors having insulation materials with higher temperature ratings.For containment of 1000 volt and lower potential circuits.Listed and marked for outdoor use.Listed and marked for direct burial and in poured concreteInstallations in hazardous (classified) locations:Class I Div. 2 Article 501Class II Div. 1 & 2 Article 502Class III Div. 1 & 2 Article 503

Type NMLT and NMSC nonmetallic connectors are intended to be used with liquidtight nonmetallic conduit Type B. ( NM, NMHT, NMFG and NM2.) They are not to be used with Type A (LNM-P) conduit or steel conduit.

Used for lighting fixture installations as well as many other electrical equipment uses. These metallic whips consist of UL listed flexible metal conduit Type BR, stranded (stock) or solid THHN wire with 6 leads, and internal, zinc die-cast fittings with steel locknuts.